[PATCH net-next v3 2/4] dt-bindings: net: sff,sfp: rename example dt nodes to be more generic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rename the dt nodes shown in the sff,sfp.yaml examples so that they are
generic and not really tied to a specific platform.

Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
Acked-by: Rob Herring <robh@xxxxxxxxxx>
---
Changes in v2:
 - new patch
Changes in v3:
 - none

 .../devicetree/bindings/net/sff,sfp.yaml       | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/sff,sfp.yaml b/Documentation/devicetree/bindings/net/sff,sfp.yaml
index 19cf88284295..06c66ab81c01 100644
--- a/Documentation/devicetree/bindings/net/sff,sfp.yaml
+++ b/Documentation/devicetree/bindings/net/sff,sfp.yaml
@@ -89,7 +89,7 @@ examples:
   - | # Direct serdes to SFP connection
     #include <dt-bindings/gpio/gpio.h>
 
-    sfp_eth3: sfp-eth3 {
+    sfp1: sfp {
       compatible = "sff,sfp";
       i2c-bus = <&sfp_1g_i2c>;
       los-gpios = <&cpm_gpio2 22 GPIO_ACTIVE_HIGH>;
@@ -101,19 +101,19 @@ examples:
       tx-fault-gpios = <&cpm_gpio2 19 GPIO_ACTIVE_HIGH>;
     };
 
-    cps_emac3 {
+    ethernet {
       phy-names = "comphy";
       phys = <&cps_comphy5 0>;
-      sfp = <&sfp_eth3>;
+      sfp = <&sfp1>;
     };
 
   - | # Serdes to PHY to SFP connection
     #include <dt-bindings/gpio/gpio.h>
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
-    sfp_eth0: sfp-eth0 {
+    sfp2: sfp {
       compatible = "sff,sfp";
-      i2c-bus = <&sfpp0_i2c>;
+      i2c-bus = <&sfp_i2c>;
       los-gpios = <&cps_gpio1 28 GPIO_ACTIVE_HIGH>;
       mod-def0-gpios = <&cps_gpio1 27 GPIO_ACTIVE_LOW>;
       pinctrl-names = "default";
@@ -126,17 +126,17 @@ examples:
       #address-cells = <1>;
       #size-cells = <0>;
 
-      p0_phy: ethernet-phy@0 {
+      phy: ethernet-phy@0 {
         compatible = "ethernet-phy-ieee802.3-c45";
         pinctrl-names = "default";
         pinctrl-0 = <&cpm_phy0_pins &cps_phy0_pins>;
         reg = <0>;
         interrupt = <&cpm_gpio2 18 IRQ_TYPE_EDGE_FALLING>;
-        sfp = <&sfp_eth0>;
+        sfp = <&sfp2>;
       };
     };
 
-    cpm_eth0 {
-      phy = <&p0_phy>;
+    ethernet {
+      phy = <&phy>;
       phy-mode = "10gbase-kr";
     };
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux