This patch series converts atmel-flexcom bindings into json-schema format. Adds support for lan966x flexcom chip-select configurations and its DT bindings. v6 -> v7: - Change filename to atmel,sama5d2-flexcom.yaml - Add #address-cells, #size-cells to flexcom node - Fixed warnings. v5 -> v6: - Removed spi node from example as suggested by Rob and also pattern properties(spi dt-bindings conversion to yaml patch is under review). https://patchwork.kernel.org/project/linux-arm-kernel/patch/20220629125804.137099-1-sergiu.moga@xxxxxxxxxxxxx/ Once this is accepted, I will add back spi example through new patch. v4 -> v5: - Fix indentations of DT example. - Fix dt-schema errors - removed minItems, maxItems for allOf:if:then "reg" property as it is not required. v3 -> v4: - Fix dtschema errors. - Add a condition to flexcom chip-selects configuration as chip-select lines are optional. v2 -> v3: - changed IRQ flag in dt-bindings example. - added reg property specific to lan66x which is missed in v2. - used goto label for clk_disable in error cases. v1 -> v2: - minor fix in title of dt-bindings. - Modified new dt properties usage in atmel,flexcom.yaml. - Used GENMASK and macros for maximum allowed values. - Use u32 values for flexcom chipselects instead of strings. - disable clock in case of errors. Kavyasree Kotagiri (3): dt-bindings: mfd: Convert atmel-flexcom to json-schema dt-bindings: mfd: atmel,sama5d2-flexcom: Add new compatible string for lan966x mfd: atmel-flexcom: Add support for lan966x flexcom chip-select configuration .../bindings/mfd/atmel,sama5d2-flexcom.yaml | 137 ++++++++++++++++++ .../devicetree/bindings/mfd/atmel-flexcom.txt | 63 -------- drivers/mfd/atmel-flexcom.c | 94 +++++++++++- 3 files changed, 230 insertions(+), 64 deletions(-) create mode 100644 Documentation/devicetree/bindings/mfd/atmel,sama5d2-flexcom.yaml delete mode 100644 Documentation/devicetree/bindings/mfd/atmel-flexcom.txt -- 2.25.1
