From: Chris Morgan <macroalpha82@xxxxxxxxx> Add support to the existing adc-joystick driver to support polling rather than relying on triggered buffers. This is useful for devices that do not offer triggered buffers in hardware. Code adapted from changes made by Maya Matuszczyk <maccraft123mc@xxxxxxxxx>. Changes from V6: - Reverted back to "poll-interval" after mailing list discussion. - Referenced input.yaml for definition of poll-interval in adc-joystick documentation. Changes from V5: - Corrected an error found by yamllint in the documentation. Changes from V4: - Added unit property to devicetree attribute making it now "poll-interval-ms". - Simplified logic for setting polled value and made variable names more clear. Changes from V3: - After lengthy discussion decided to support with existing attribute of "poll-interval". If present, the driver will use polling and if not present, it will use triggered buffers (as the driver does today). - Corrected some lines to honor the 80 character line-limit. - Check return value from polling method and return early if there is an error reading the data. Changes from V2: - Changed parameter from "adc-joystick,polled" to "adc-joystick,no-hardware-trigger" as it is more representative of what the driver and hardware are doing. Changes from V1: - Removed driver compatible string of "adc-joystick-polled". - Added new optional boolean value of "adc-joystick,polled". - Cleaned up if statements regarding polling behavior. Chris Morgan (3): dt-bindings: adc-joystick: add poll-interval Input: adc-joystick - Add polled input device support arm64: dts: rockchip: Update joystick to polled for OG2 .../bindings/input/adc-joystick.yaml | 5 ++ .../boot/dts/rockchip/rk3326-odroid-go2.dts | 1 + drivers/input/joystick/adc-joystick.c | 51 +++++++++++++++---- 3 files changed, 46 insertions(+), 11 deletions(-) -- 2.34.1