Re: [PATCH 1/2] dt-bindings: leds: Add cznic,turris1x-leds.yaml binding

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, 05 Jul 2022 02:04:47 +0200, Pali Rohár wrote:
> Add device-tree bindings documentation for Turris 1.x RGB LEDs.
> 
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> ---
>  .../bindings/leds/cznic,turris1x-leds.yaml    | 116 ++++++++++++++++++
>  1 file changed, 116 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/leds/cznic,turris1x-leds.yaml
> 

My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/leds/cznic,turris1x-leds.example.dts:21.18-84.11: Warning (unit_address_vs_reg): /example-0/cpld@3,0: node has a unit name, but no reg or ranges property
/builds/robherring/linux-dt-review/Documentation/devicetree/bindings/leds/cznic,turris1x-leds.example.dtb: led-controller@13: reg: [[19, 29]] is too short
	From schema: /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/leds/cznic,turris1x-leds.yaml

doc reference errors (make refcheckdocs):

See https://patchwork.ozlabs.org/patch/

This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit.




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux