[PATCH 03/11] spi: spi-nxp-fspi: add DTR mode support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Haibo Chen <haibo.chen@xxxxxxx>

For LUT, add DTR command support.

Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx>
---
 drivers/spi/spi-nxp-fspi.c | 27 ++++++++++++++++++++++-----
 1 file changed, 22 insertions(+), 5 deletions(-)

diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c
index 10e71e55d21a..c32a4f53fa2a 100644
--- a/drivers/spi/spi-nxp-fspi.c
+++ b/drivers/spi/spi-nxp-fspi.c
@@ -537,12 +537,22 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	int lutidx = 1, i;
 
 	/* cmd */
-	lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
-			     op->cmd.opcode);
+	if (op->cmd.dtr) {
+		lutval[0] |= LUT_DEF(0, LUT_CMD_DDR, LUT_PAD(op->cmd.buswidth),
+				     op->cmd.opcode >> 8);
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_CMD_DDR,
+					      LUT_PAD(op->cmd.buswidth),
+					      op->cmd.opcode & 0x00ff);
+		lutidx++;
+	} else {
+		lutval[0] |= LUT_DEF(0, LUT_CMD, LUT_PAD(op->cmd.buswidth),
+				     op->cmd.opcode);
+	}
 
 	/* addr bytes */
 	if (op->addr.nbytes) {
-		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_ADDR,
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, op->addr.dtr ?
+					      LUT_ADDR_DDR : LUT_ADDR,
 					      LUT_PAD(op->addr.buswidth),
 					      op->addr.nbytes * 8);
 		lutidx++;
@@ -550,7 +560,8 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 
 	/* dummy bytes, if needed */
 	if (op->dummy.nbytes) {
-		lutval[lutidx / 2] |= LUT_DEF(lutidx, LUT_DUMMY,
+		lutval[lutidx / 2] |= LUT_DEF(lutidx, op->dummy.dtr ?
+					      LUT_DUMMY_DDR : LUT_DUMMY,
 		/*
 		 * Due to FlexSPI controller limitation number of PAD for dummy
 		 * buswidth needs to be programmed as equal to data buswidth.
@@ -565,7 +576,8 @@ static void nxp_fspi_prepare_lut(struct nxp_fspi *f,
 	if (op->data.nbytes) {
 		lutval[lutidx / 2] |= LUT_DEF(lutidx,
 					      op->data.dir == SPI_MEM_DATA_IN ?
-					      LUT_NXP_READ : LUT_NXP_WRITE,
+					      (op->data.dtr ? LUT_READ_DDR : LUT_NXP_READ) :
+					      (op->data.dtr ? LUT_WRITE_DDR : LUT_NXP_WRITE),
 					      LUT_PAD(op->data.buswidth),
 					      0);
 		lutidx++;
@@ -1090,6 +1102,10 @@ static const struct spi_controller_mem_ops nxp_fspi_mem_ops = {
 	.get_name = nxp_fspi_get_name,
 };
 
+static struct spi_controller_mem_caps nxp_fspi_mem_caps = {
+	.dtr = true,
+};
+
 static int nxp_fspi_probe(struct platform_device *pdev)
 {
 	struct spi_controller *ctlr;
@@ -1194,6 +1210,7 @@ static int nxp_fspi_probe(struct platform_device *pdev)
 	ctlr->bus_num = -1;
 	ctlr->num_chipselect = NXP_FSPI_MAX_CHIPSELECT;
 	ctlr->mem_ops = &nxp_fspi_mem_ops;
+	ctlr->mem_caps = &nxp_fspi_mem_caps;
 
 	nxp_fspi_default_setup(f);
 
-- 
2.25.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux