From: Haibo Chen <haibo.chen@xxxxxxx> The fspi dynamic lut use the last lut for all IPS operations, the imx8ulp only supports 15 luts, so change the last lut index from 31 to 15. Signed-off-by: Han Xu <han.xu@xxxxxxx> Signed-off-by: Haibo Chen <haibo.chen@xxxxxxx> --- drivers/spi/spi-nxp-fspi.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/spi/spi-nxp-fspi.c b/drivers/spi/spi-nxp-fspi.c index b2cd8e06f374..10e71e55d21a 100644 --- a/drivers/spi/spi-nxp-fspi.c +++ b/drivers/spi/spi-nxp-fspi.c @@ -65,9 +65,9 @@ /* * The driver only uses one single LUT entry, that is updated on * each call of exec_op(). Index 0 is preset at boot with a basic - * read operation, so let's use the last entry (31). + * read operation, so let's use the last entry (15). */ -#define SEQID_LUT 31 +#define SEQID_LUT 15 /* Registers used by the driver */ #define FSPI_MCR0 0x00 -- 2.25.1
