[PATCH v2 net-next 4/4] arch: arm64: dts: marvell: rename the sfp GPIO properties

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Rename the GPIO related sfp properties to include the preffered -gpios
suffix. Also, with this change the dtb_check will no longer complain
when trying to verify the DTS against the sff,sfp.yaml binding.

Signed-off-by: Ioana Ciornei <ioana.ciornei@xxxxxxx>
---
Changes in v2:
 - new patch

 .../dts/marvell/armada-3720-turris-mox.dts    | 10 ++++----
 .../boot/dts/marvell/armada-3720-uDPU.dts     | 16 ++++++-------
 .../boot/dts/marvell/armada-7040-mochabin.dts | 16 ++++++-------
 .../marvell/armada-8040-clearfog-gt-8k.dts    |  4 ++--
 .../boot/dts/marvell/armada-8040-mcbin.dtsi   | 24 +++++++++----------
 .../dts/marvell/armada-8040-puzzle-m801.dts   | 16 ++++++-------
 arch/arm64/boot/dts/marvell/cn9130-crb.dtsi   |  6 ++---
 arch/arm64/boot/dts/marvell/cn9130-db.dtsi    |  8 +++----
 arch/arm64/boot/dts/marvell/cn9131-db.dtsi    |  8 +++----
 arch/arm64/boot/dts/marvell/cn9132-db.dtsi    |  8 +++----
 10 files changed, 58 insertions(+), 58 deletions(-)

diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index caf9c8529fca..cbf75ddd6857 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -100,11 +100,11 @@
 	sfp: sfp {
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c0>;
-		los-gpio = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
-		rate-select0-gpio = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&moxtet_sfp 0 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&moxtet_sfp 1 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&moxtet_sfp 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&moxtet_sfp 4 GPIO_ACTIVE_HIGH>;
+		rate-select0-gpios = <&moxtet_sfp 5 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 
 		/* enabled by U-Boot if SFP module is present */
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
index a35317d24d6c..b20c8e7d923b 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-uDPU.dts
@@ -65,20 +65,20 @@
 	sfp_eth0: sfp-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c0>;
-		los-gpio = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 3 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpiosb 2 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpiosb 3 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpiosb 4 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpiosb 5 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 
 	sfp_eth1: sfp-eth1 {
 		compatible = "sff,sfp";
 		i2c-bus = <&i2c1>;
-		los-gpio = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&gpiosb 8 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&gpiosb 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&gpiosb 8 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&gpiosb 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&gpiosb 10 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 };
diff --git a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
index 39a8e5e99d79..5f6ed735e31a 100644
--- a/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
+++ b/arch/arm64/boot/dts/marvell/armada-7040-mochabin.dts
@@ -34,20 +34,20 @@
 	sfp_eth0: sfp-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_i2c1>;
-		los-gpio = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sfp_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfp_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios  = <&sfp_gpio 0 GPIO_ACTIVE_HIGH>;
 	};
 
 	/* SFP 1G */
 	sfp_eth2: sfp-eth2 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_i2c0>;
-		los-gpio = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sfp_gpio 7 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfp_gpio 6 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfp_gpio 5 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios  = <&sfp_gpio 4 GPIO_ACTIVE_HIGH>;
 	};
 };
 
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 871f84b4a6ed..079c2745070a 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -64,8 +64,8 @@
 	sfp_cp0_eth0: sfp-cp0-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_i2c1>;
-		mod-def0-gpio = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 17 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_sfp_present_pins &cp1_sfp_tx_disable_pins>;
 		maximum-power-milliwatt = <2000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
index 779cf167c33e..33c179838e24 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
+++ b/arch/arm64/boot/dts/marvell/armada-8040-mcbin.dtsi
@@ -65,10 +65,10 @@
 		/* CON15,16 - CPM lane 4 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfpp0_i2c>;
-		los-gpio = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&cp1_gpio1 28 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 27 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 29 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios  = <&cp1_gpio1 26 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp0_pins>;
 		maximum-power-milliwatt = <2000>;
@@ -78,10 +78,10 @@
 		/* CON17,18 - CPS lane 4 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfpp1_i2c>;
-		los-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio2 30 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfpp1_pins &cp0_sfpp1_pins>;
 		maximum-power-milliwatt = <2000>;
@@ -91,10 +91,10 @@
 		/* CON13,14 - CPS lane 5 */
 		compatible = "sff,sfp";
 		i2c-bus = <&sfp_1g_i2c>;
-		los-gpio = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&cp0_gpio2 22 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_gpio2 21 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 24 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio2 19 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp0_sfp_1g_pins &cp1_sfp_1g_pins>;
 		maximum-power-milliwatt = <2000>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
index 74bed79e4f5e..72e9b0f671a9 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-puzzle-m801.dts
@@ -67,20 +67,20 @@
 	sfp_cp0_eth0: sfp-cp0-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&sfpplus0_i2c>;
-		los-gpio = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sfpplus_gpio 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpplus_gpio 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfpplus_gpio 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios  = <&sfpplus_gpio 8 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 
 	sfp_cp1_eth0: sfp-cp1-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&sfpplus1_i2c>;
-		los-gpio = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio  = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&sfpplus_gpio 3 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&sfpplus_gpio 2 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&sfpplus_gpio 1 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios  = <&sfpplus_gpio 0 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 	};
 
diff --git a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
index 1acd746284dc..8e4ec243fb8f 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-crb.dtsi
@@ -78,9 +78,9 @@
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_i2c1>;
 		mod-def0-gpios = <&expander0 3 GPIO_ACTIVE_LOW>;
-		los-gpio = <&expander0 15 GPIO_ACTIVE_HIGH>;
-		tx-disable-gpio = <&expander0 2 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&expander0 15 GPIO_ACTIVE_HIGH>;
+		tx-disable-gpios = <&expander0 2 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_gpio1 24 GPIO_ACTIVE_HIGH>;
 		maximum-power-milliwatt = <3000>;
 		status = "okay";
 	};
diff --git a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
index 7e20987253a3..85d7ce13e70a 100644
--- a/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9130-db.dtsi
@@ -90,10 +90,10 @@
 	cp0_sfp_eth0: sfp-eth@0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp0_sfpp0_i2c>;
-		los-gpio = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&cp0_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp0_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp0_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp0_module_expander1 8 GPIO_ACTIVE_HIGH>;
 		/*
 		 * SFP cages are unconnected on early PCBs because of an the I2C
 		 * lanes not being connected. Prevent the port for being
diff --git a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
index b7fc241a228c..ff8422fae31b 100644
--- a/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9131-db.dtsi
@@ -37,10 +37,10 @@
 	cp1_sfp_eth1: sfp-eth1 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp1_i2c0>;
-		los-gpio = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&cp1_gpio1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp1_gpio1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp1_gpio1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp1_gpio1 8 GPIO_ACTIVE_HIGH>;
 		pinctrl-names = "default";
 		pinctrl-0 = <&cp1_sfp_pins>;
 		/*
diff --git a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
index 3f1795fb4fe7..512a4fa2861e 100644
--- a/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
+++ b/arch/arm64/boot/dts/marvell/cn9132-db.dtsi
@@ -57,10 +57,10 @@
 	cp2_sfp_eth0: sfp-eth0 {
 		compatible = "sff,sfp";
 		i2c-bus = <&cp2_sfpp0_i2c>;
-		los-gpio = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
-		mod-def0-gpio = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
-		tx-disable-gpio = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
-		tx-fault-gpio = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
+		los-gpios = <&cp2_module_expander1 11 GPIO_ACTIVE_HIGH>;
+		mod-def0-gpios = <&cp2_module_expander1 10 GPIO_ACTIVE_LOW>;
+		tx-disable-gpios = <&cp2_module_expander1 9 GPIO_ACTIVE_HIGH>;
+		tx-fault-gpios = <&cp2_module_expander1 8 GPIO_ACTIVE_HIGH>;
 		/*
 		 * SFP cages are unconnected on early PCBs because of an the I2C
 		 * lanes not being connected. Prevent the port for being
-- 
2.17.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux