Am Sonntag, 26. Juni 2022, 04:11:43 CEST schrieb Samuel Holland:
> H6 requires I/O bias configuration on both of its PIO devices.
> Previously it was only done for the main PIO.
>
> The setting for Port L is at bit 0, so the bank calculation needs to
> account for the pin base. Otherwise the wrong bit is used.
>
> Fixes: cc62383fcebe ("pinctrl: sunxi: Support I/O bias voltage setting on H6")
> Signed-off-by: Samuel Holland <samuel@xxxxxxxxxxxx>
On a D1-Nezha
Tested-by: Heiko Stuebner <heiko@xxxxxxxxx>
