As was already done for MT8192 in commit b52e695324bb ("dt-bindings:
pinctrl: mt8192: Add drive-strength-microamp"), replace the custom
mediatek,drive-strength-adv property with the standardized pinconf
'drive-strength-microamp' one.
Similarly to the mt8192 counterpart, there's no user of property
'mediatek,drive-strength-adv', hence removing it is safe.
Fixes: 69c3d58dc187 ("dt-bindings: pinctrl: mt8195: Add mediatek,drive-strength-adv property")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx>
---
.../bindings/pinctrl/pinctrl-mt8195.yaml | 27 ++-----------------
1 file changed, 2 insertions(+), 25 deletions(-)
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
index b0fea44403e7..85e96a5e1708 100644
--- a/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-mt8195.yaml
@@ -100,31 +100,8 @@ patternProperties:
drive-strength:
enum: [2, 4, 6, 8, 10, 12, 14, 16]
- mediatek,drive-strength-adv:
- description: |
- Describe the specific driving setup property.
- For I2C pins, the existing generic driving setup can only support
- 2/4/6/8/10/12/14/16mA driving. But in specific driving setup, they
- can support 0.125/0.25/0.5/1mA adjustment. If we enable specific
- driving setup, the existing generic setup will be disabled.
- The specific driving setup is controlled by E1E0EN.
- When E1=0/E0=0, the strength is 0.125mA.
- When E1=0/E0=1, the strength is 0.25mA.
- When E1=1/E0=0, the strength is 0.5mA.
- When E1=1/E0=1, the strength is 1mA.
- EN is used to enable or disable the specific driving setup.
- Valid arguments are described as below:
- 0: (E1, E0, EN) = (0, 0, 0)
- 1: (E1, E0, EN) = (0, 0, 1)
- 2: (E1, E0, EN) = (0, 1, 0)
- 3: (E1, E0, EN) = (0, 1, 1)
- 4: (E1, E0, EN) = (1, 0, 0)
- 5: (E1, E0, EN) = (1, 0, 1)
- 6: (E1, E0, EN) = (1, 1, 0)
- 7: (E1, E0, EN) = (1, 1, 1)
- So the valid arguments are from 0 to 7.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3, 4, 5, 6, 7]
+ drive-strength-microamp:
+ enum: [125, 250, 500, 1000]
bias-pull-down:
oneOf:
--
2.35.1
