The AXP192 PMIC's GPIO registers are much different from the GPIO
registers of the AXP20x and AXP813 PMICs supported by the existing
pinctrl-axp209 driver. It makes more sense to add a new driver for
the AXP192, rather than add support in the existing axp20x driver.
The pinctrl-axp192 driver is considerably more flexible in terms of
register layout and should be able to support other X-Powers PMICs.
Interrupts and pull down resistor configuration are supported too.
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
---
drivers/pinctrl/Kconfig | 13 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-axp192.c | 598 +++++++++++++++++++++++++++++++
3 files changed, 612 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-axp192.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index f52960d2dfbe..5f2c212dd99b 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -113,6 +113,19 @@ config PINCTRL_AT91PIO4
Say Y here to enable the at91 pinctrl/gpio driver for Atmel PIO4
controller available on sama5d2 SoC.
+config PINCTRL_AXP192
+ tristate "X-Powers AXP192 PMIC pinctrl and GPIO Support"
+ depends on MFD_AXP20X
+ select PINMUX
+ select GENERIC_PINCONF
+ select GPIOLIB
+ help
+ AXP PMICs provide multiple GPIOs that can be muxed for different
+ functions. This driver bundles a pinctrl driver to select the function
+ muxing and a GPIO driver to handle the GPIO when the GPIO function is
+ selected.
+ Say Y to enable pinctrl and GPIO support for the AXP192 PMIC.
+
config PINCTRL_AXP209
tristate "X-Powers AXP209 PMIC pinctrl and GPIO Support"
depends on MFD_AXP20X
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e76f5cdc64b0..9d2b6420c5dd 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_PINCTRL_ARTPEC6) += pinctrl-artpec6.o
obj-$(CONFIG_PINCTRL_AS3722) += pinctrl-as3722.o
obj-$(CONFIG_PINCTRL_AT91) += pinctrl-at91.o
obj-$(CONFIG_PINCTRL_AT91PIO4) += pinctrl-at91-pio4.o
+obj-$(CONFIG_PINCTRL_AXP192) += pinctrl-axp192.o
obj-$(CONFIG_PINCTRL_AXP209) += pinctrl-axp209.o
obj-$(CONFIG_PINCTRL_BM1880) += pinctrl-bm1880.o
obj-$(CONFIG_PINCTRL_DA850_PUPD) += pinctrl-da850-pupd.o
diff --git a/drivers/pinctrl/pinctrl-axp192.c b/drivers/pinctrl/pinctrl-axp192.c
new file mode 100644
index 000000000000..ce096920b986
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-axp192.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * AXP192 pinctrl and GPIO driver
+ *
+ * Copyright (C) 2022 Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>
+ */
+
+#include <linux/bitops.h>
+#include <linux/device.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/limits.h>
+#include <linux/mfd/axp20x.h>
+#include <linux/module.h>
+#include <linux/mod_devicetable.h>
+#include <linux/pinctrl/pinconf-generic.h>
+#include <linux/pinctrl/pinconf.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+
+enum {
+ AXP192_FUNC_OUTPUT = 0,
+ AXP192_FUNC_INPUT,
+ AXP192_FUNC_LDO,
+ AXP192_FUNC_PWM,
+ AXP192_FUNC_ADC,
+ AXP192_FUNC_LOW_OUTPUT,
+ AXP192_FUNC_FLOATING,
+ AXP192_FUNC_EXT_CHG_CTL,
+ AXP192_FUNC_LDO_STATUS,
+ AXP192_FUNCS_NB,
+};
+
+/**
+ * struct axp192_pctl_function - describes a function that GPIOs may have
+ *
+ * @name: Function name
+ * @muxvals: Mux values used for selecting this function, one per GPIO.
+ * The i'th element corresponds to the i'th GPIO and is written
+ * to the GPIO's control register field to select this function.
+ * U8_MAX indicates that the pin does not support this function.
+ * @groups: Array of @ngroups groups listing pins supporting this function.
+ * @ngroups: Number of pin groups.
+ */
+struct axp192_pctl_function {
+ const char *name;
+ /* Mux value written to the control register to select the function (-1 if unsupported) */
+ const u8 *muxvals;
+ const char * const *groups;
+ unsigned int ngroups;
+};
+
+/**
+ * struct axp192_pctl_reg_info - describes a register and field
+ *
+ * @reg: Register address.
+ * @mask: Bitmask that defines the field.
+ */
+struct axp192_pctl_reg_info {
+ u8 reg;
+ u8 mask;
+};
+
+/**
+ * struct axp192_pctl_desc - describes a pin control device
+ *
+ * @npins: Number of pins.
+ * @pins: Array of @npins pin descriptors.
+ * @ctrl_regs: Describes the control register and field for selecting
+ * pin function for each pin. Pin function mux values are
+ * written to this field.
+ * @out_regs: Describes the output state register and bit for setting
+ * the output signal level when the pin is configured as a
+ * GPIO output for each pin.
+ * @in_regs: Describes the input state register and bit for polling
+ * the input signal level when the pin is configured as a GPIO
+ * input for each pin.
+ * @pull_down_regs: Describes the register and bit used to enable the
+ * pull down resistor for each pin. Use a zero mask if
+ * the pin does not support a configurable pull down.
+ *
+ * @nfunctions: Number of selectable pinmux functions.
+ * @functions: Array of @nfunctions function descriptors.
+ */
+struct axp192_pctl_desc {
+ unsigned int npins;
+ const struct pinctrl_pin_desc *pins;
+ const struct axp192_pctl_reg_info *ctrl_regs;
+ const struct axp192_pctl_reg_info *out_regs;
+ const struct axp192_pctl_reg_info *in_regs;
+ const struct axp192_pctl_reg_info *pull_down_regs;
+
+ unsigned int nfunctions;
+ const struct axp192_pctl_function *functions;
+};
+
+static const struct pinctrl_pin_desc axp192_pins[] = {
+ PINCTRL_PIN(0, "GPIO0"),
+ PINCTRL_PIN(1, "GPIO1"),
+ PINCTRL_PIN(2, "GPIO2"),
+ PINCTRL_PIN(3, "GPIO3"),
+ PINCTRL_PIN(4, "GPIO4"),
+ PINCTRL_PIN(5, "N_RSTO"),
+};
+
+static const char * const axp192_io_groups[] = { "GPIO0", "GPIO1", "GPIO2",
+ "GPIO3", "GPIO4", "N_RSTO" };
+static const char * const axp192_ldo_groups[] = { "GPIO0" };
+static const char * const axp192_pwm_groups[] = { "GPIO1", "GPIO2" };
+static const char * const axp192_adc_groups[] = { "GPIO0", "GPIO1", "GPIO2", "GPIO3" };
+static const char * const axp192_extended_io_groups[] = { "GPIO0", "GPIO1", "GPIO2" };
+static const char * const axp192_ext_chg_ctl_groups[] = { "GPIO3", "GPIO4" };
+static const char * const axp192_ldo_status_groups[] = { "N_RSTO" };
+
+static const u8 axp192_output_muxvals[] = { 0, 0, 0, 1, 1, 2 };
+static const u8 axp192_input_muxvals[] = { 1, 1, 1, 2, 2, 3 };
+static const u8 axp192_ldo_muxvals[] = { 2, -1, -1, -1, -1, -1 };
+static const u8 axp192_pwm_muxvals[] = { -1, 2, 2, -1, -1, -1 };
+static const u8 axp192_adc_muxvals[] = { 4, 4, 4, 3, -1, -1 };
+static const u8 axp192_low_output_muxvals[] = { 5, 5, 5, -1, -1, -1 };
+static const u8 axp192_floating_muxvals[] = { 6, 6, 6, -1, -1, -1 };
+static const u8 axp192_ext_chg_ctl_muxvals[] = { -1, -1, -1, 0, 0, -1 };
+static const u8 axp192_ldo_status_muxvals[] = { -1, -1, -1, -1, -1, 0 };
+
+static const struct axp192_pctl_function axp192_functions[AXP192_FUNCS_NB] = {
+ [AXP192_FUNC_OUTPUT] = {
+ .name = "output",
+ .muxvals = axp192_output_muxvals,
+ .groups = axp192_io_groups,
+ .ngroups = ARRAY_SIZE(axp192_io_groups),
+ },
+ [AXP192_FUNC_INPUT] = {
+ .name = "input",
+ .muxvals = axp192_input_muxvals,
+ .groups = axp192_io_groups,
+ .ngroups = ARRAY_SIZE(axp192_io_groups),
+ },
+ [AXP192_FUNC_LDO] = {
+ .name = "ldo",
+ .muxvals = axp192_ldo_muxvals,
+ .groups = axp192_ldo_groups,
+ .ngroups = ARRAY_SIZE(axp192_ldo_groups),
+ },
+ [AXP192_FUNC_PWM] = {
+ .name = "pwm",
+ .muxvals = axp192_pwm_muxvals,
+ .groups = axp192_pwm_groups,
+ .ngroups = ARRAY_SIZE(axp192_pwm_groups),
+ },
+ [AXP192_FUNC_ADC] = {
+ .name = "adc",
+ .muxvals = axp192_adc_muxvals,
+ .groups = axp192_adc_groups,
+ .ngroups = ARRAY_SIZE(axp192_adc_groups),
+ },
+ [AXP192_FUNC_LOW_OUTPUT] = {
+ .name = "low_output",
+ .muxvals = axp192_low_output_muxvals,
+ .groups = axp192_extended_io_groups,
+ .ngroups = ARRAY_SIZE(axp192_extended_io_groups),
+ },
+ [AXP192_FUNC_FLOATING] = {
+ .name = "floating",
+ .muxvals = axp192_floating_muxvals,
+ .groups = axp192_extended_io_groups,
+ .ngroups = ARRAY_SIZE(axp192_extended_io_groups),
+ },
+ [AXP192_FUNC_EXT_CHG_CTL] = {
+ .name = "ext_chg_ctl",
+ .muxvals = axp192_ext_chg_ctl_muxvals,
+ .groups = axp192_ext_chg_ctl_groups,
+ .ngroups = ARRAY_SIZE(axp192_ext_chg_ctl_groups),
+ },
+ [AXP192_FUNC_LDO_STATUS] = {
+ .name = "ldo_status",
+ .muxvals = axp192_ldo_status_muxvals,
+ .groups = axp192_ldo_groups,
+ .ngroups = ARRAY_SIZE(axp192_ldo_status_groups),
+ },
+};
+
+static const struct axp192_pctl_reg_info axp192_pin_ctrl_regs[] = {
+ { .reg = AXP192_GPIO0_CTRL, .mask = GENMASK(2, 0) },
+ { .reg = AXP192_GPIO1_CTRL, .mask = GENMASK(2, 0) },
+ { .reg = AXP192_GPIO2_CTRL, .mask = GENMASK(2, 0) },
+ { .reg = AXP192_GPIO4_3_CTRL, .mask = GENMASK(1, 0) },
+ { .reg = AXP192_GPIO4_3_CTRL, .mask = GENMASK(3, 2) },
+ { .reg = AXP192_N_RSTO_CTRL, .mask = GENMASK(7, 6) },
+};
+
+static const struct axp192_pctl_reg_info axp192_pin_in_regs[] = {
+ { .reg = AXP192_GPIO2_0_STATE, .mask = BIT(4) },
+ { .reg = AXP192_GPIO2_0_STATE, .mask = BIT(5) },
+ { .reg = AXP192_GPIO2_0_STATE, .mask = BIT(6) },
+ { .reg = AXP192_GPIO4_3_STATE, .mask = BIT(4) },
+ { .reg = AXP192_GPIO4_3_STATE, .mask = BIT(5) },
+ { .reg = AXP192_N_RSTO_CTRL, .mask = BIT(4) },
+};
+
+static const struct axp192_pctl_reg_info axp192_pin_out_regs[] = {
+ { .reg = AXP192_GPIO2_0_STATE, .mask = BIT(0) },
+ { .reg = AXP192_GPIO2_0_STATE, .mask = BIT(1) },
+ { .reg = AXP192_GPIO2_0_STATE, .mask = BIT(2) },
+ { .reg = AXP192_GPIO4_3_STATE, .mask = BIT(0) },
+ { .reg = AXP192_GPIO4_3_STATE, .mask = BIT(1) },
+ { .reg = AXP192_N_RSTO_CTRL, .mask = BIT(5) },
+};
+
+static const struct axp192_pctl_reg_info axp192_pull_down_regs[] = {
+ { .reg = AXP192_GPIO2_0_PULL, .mask = BIT(0) },
+ { .reg = AXP192_GPIO2_0_PULL, .mask = BIT(1) },
+ { .reg = AXP192_GPIO2_0_PULL, .mask = BIT(2) },
+ { .reg = 0, .mask = 0 /* unsupported */ },
+ { .reg = 0, .mask = 0 /* unsupported */ },
+ { .reg = 0, .mask = 0 /* unsupported */ },
+};
+
+static const struct axp192_pctl_desc axp192_data = {
+ .npins = ARRAY_SIZE(axp192_pins),
+ .pins = axp192_pins,
+ .ctrl_regs = axp192_pin_ctrl_regs,
+ .out_regs = axp192_pin_out_regs,
+ .in_regs = axp192_pin_in_regs,
+ .pull_down_regs = axp192_pull_down_regs,
+
+ .nfunctions = ARRAY_SIZE(axp192_functions),
+ .functions = axp192_functions,
+};
+
+struct axp192_pctl {
+ struct gpio_chip chip;
+ struct regmap *regmap;
+ struct regmap_irq_chip_data *regmap_irqc;
+ struct pinctrl_dev *pctl_dev;
+ struct device *dev;
+ const struct axp192_pctl_desc *desc;
+ int *irqs;
+};
+
+static int axp192_gpio_get(struct gpio_chip *chip, unsigned int offset)
+{
+ struct axp192_pctl *pctl = gpiochip_get_data(chip);
+ const struct axp192_pctl_reg_info *reginfo = &pctl->desc->in_regs[offset];
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(pctl->regmap, reginfo->reg, &val);
+ if (ret)
+ return ret;
+
+ return !!(val & reginfo->mask);
+}
+
+static int axp192_gpio_get_direction(struct gpio_chip *chip, unsigned int offset)
+{
+ struct axp192_pctl *pctl = gpiochip_get_data(chip);
+ const struct axp192_pctl_reg_info *reginfo = &pctl->desc->ctrl_regs[offset];
+ const u8 *input_muxvals = pctl->desc->functions[AXP192_FUNC_INPUT].muxvals;
+ unsigned int val;
+ int ret;
+
+ ret = regmap_read(pctl->regmap, reginfo->reg, &val);
+ if (ret)
+ return ret;
+
+ if ((val & reginfo->mask) == (input_muxvals[offset] << (ffs(reginfo->mask) - 1)))
+ return GPIO_LINE_DIRECTION_IN;
+
+ return GPIO_LINE_DIRECTION_OUT;
+}
+
+static void axp192_gpio_set(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ struct axp192_pctl *pctl = gpiochip_get_data(chip);
+ const struct axp192_pctl_reg_info *reginfo = &pctl->desc->out_regs[offset];
+
+ regmap_update_bits(pctl->regmap, reginfo->reg, reginfo->mask, value ? reginfo->mask : 0);
+}
+
+static int axp192_gpio_direction_input(struct gpio_chip *chip, unsigned int offset)
+{
+ return pinctrl_gpio_direction_input(chip->base + offset);
+}
+
+static int axp192_gpio_direction_output(struct gpio_chip *chip, unsigned int offset, int value)
+{
+ chip->set(chip, offset, value);
+
+ return pinctrl_gpio_direction_output(chip->base + offset);
+}
+
+static int axp192_gpio_to_irq(struct gpio_chip *chip, unsigned int offset)
+{
+ struct axp192_pctl *pctl = gpiochip_get_data(chip);
+
+ /* GPIO IRQs are optional */
+ if (!pctl->irqs[offset])
+ return 0;
+
+ return regmap_irq_get_virq(pctl->regmap_irqc, pctl->irqs[offset]);
+}
+
+static int axp192_pinconf_get_pull_down(struct pinctrl_dev *pctldev, unsigned int pin,
+ bool *state)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct axp192_pctl_reg_info *reginfo = &pctl->desc->pull_down_regs[pin];
+ unsigned int val;
+ int ret;
+
+ if (!reginfo->mask)
+ return -ENOTSUPP;
+
+ ret = regmap_read(pctl->regmap, reginfo->reg, &val);
+ if (ret)
+ return ret;
+
+ *state = !!(val & reginfo->mask);
+ return 0;
+}
+
+static int axp192_pinconf_set_pull_down(struct pinctrl_dev *pctldev, unsigned int pin, int value)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct axp192_pctl_reg_info *reginfo = &pctl->desc->pull_down_regs[pin];
+
+ if (!reginfo->mask)
+ return -ENOTSUPP;
+
+ return regmap_update_bits(pctl->regmap, reginfo->reg, reginfo->mask,
+ value ? reginfo->mask : 0);
+}
+
+static int axp192_pinconf_get(struct pinctrl_dev *pctldev, unsigned int pin, unsigned long *config)
+{
+ enum pin_config_param param = pinconf_to_config_param(*config);
+ unsigned int arg = 1;
+ bool pull_down;
+ int ret;
+
+ switch (param) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ ret = axp192_pinconf_get_pull_down(pctldev, pin, &pull_down);
+ if (ret)
+ return ret;
+ if (pull_down)
+ return -EINVAL;
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ ret = axp192_pinconf_get_pull_down(pctldev, pin, &pull_down);
+ if (ret)
+ return ret;
+ if (!pull_down)
+ return -EINVAL;
+ break;
+
+ default:
+ return -ENOTSUPP;
+ }
+
+ *config = pinconf_to_config_packed(param, arg);
+ return 0;
+}
+
+static int axp192_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
+ unsigned long *configs, unsigned int num_configs)
+{
+ int ret;
+ unsigned int cfg;
+
+ for (cfg = 0; cfg < num_configs; cfg++) {
+ switch (pinconf_to_config_param(configs[cfg])) {
+ case PIN_CONFIG_BIAS_DISABLE:
+ ret = axp192_pinconf_set_pull_down(pctldev, pin, 0);
+ if (ret)
+ return ret;
+ break;
+
+ case PIN_CONFIG_BIAS_PULL_DOWN:
+ ret = axp192_pinconf_set_pull_down(pctldev, pin, 1);
+ if (ret)
+ return ret;
+ break;
+
+ default:
+ return -ENOTSUPP;
+ }
+ }
+
+ return 0;
+}
+
+static const struct pinconf_ops axp192_conf_ops = {
+ .is_generic = true,
+ .pin_config_get = axp192_pinconf_get,
+ .pin_config_set = axp192_pinconf_set,
+ .pin_config_group_get = axp192_pinconf_get,
+ .pin_config_group_set = axp192_pinconf_set,
+};
+
+static int axp192_pmx_set(struct pinctrl_dev *pctldev, unsigned int offset, u8 config)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ const struct axp192_pctl_reg_info *reginfo = &pctl->desc->ctrl_regs[offset];
+ unsigned int regval = config << (ffs(reginfo->mask) - 1);
+
+ return regmap_update_bits(pctl->regmap, reginfo->reg, reginfo->mask, regval);
+}
+
+static int axp192_pmx_func_cnt(struct pinctrl_dev *pctldev)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->desc->nfunctions;
+}
+
+static const char *axp192_pmx_func_name(struct pinctrl_dev *pctldev, unsigned int selector)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->desc->functions[selector].name;
+}
+
+static int axp192_pmx_func_groups(struct pinctrl_dev *pctldev, unsigned int selector,
+ const char * const **groups, unsigned int *num_groups)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ *groups = pctl->desc->functions[selector].groups;
+ *num_groups = pctl->desc->functions[selector].ngroups;
+
+ return 0;
+}
+
+static int axp192_pmx_set_mux(struct pinctrl_dev *pctldev,
+ unsigned int function, unsigned int group)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ const u8 *muxvals = pctl->desc->functions[function].muxvals;
+
+ if (muxvals[group] == U8_MAX)
+ return -EINVAL;
+
+ /*
+ * Switching to LDO or PWM function will enable LDO/PWM output, so it's
+ * better to ignore these requests and let the regulator or PWM drivers
+ * handle muxing to avoid interfering with them.
+ */
+ if (function == AXP192_FUNC_LDO || function == AXP192_FUNC_PWM)
+ return 0;
+
+ return axp192_pmx_set(pctldev, group, muxvals[group]);
+}
+
+static int axp192_pmx_gpio_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int offset, bool input)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+ const u8 *muxvals = input ? pctl->desc->functions[AXP192_FUNC_INPUT].muxvals
+ : pctl->desc->functions[AXP192_FUNC_OUTPUT].muxvals;
+
+ return axp192_pmx_set(pctldev, offset, muxvals[offset]);
+}
+
+static const struct pinmux_ops axp192_pmx_ops = {
+ .get_functions_count = axp192_pmx_func_cnt,
+ .get_function_name = axp192_pmx_func_name,
+ .get_function_groups = axp192_pmx_func_groups,
+ .set_mux = axp192_pmx_set_mux,
+ .gpio_set_direction = axp192_pmx_gpio_set_direction,
+ .strict = true,
+};
+
+static int axp192_groups_cnt(struct pinctrl_dev *pctldev)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->desc->npins;
+}
+
+static const char *axp192_group_name(struct pinctrl_dev *pctldev, unsigned int selector)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ return pctl->desc->pins[selector].name;
+}
+
+static int axp192_group_pins(struct pinctrl_dev *pctldev, unsigned int selector,
+ const unsigned int **pins, unsigned int *num_pins)
+{
+ struct axp192_pctl *pctl = pinctrl_dev_get_drvdata(pctldev);
+
+ *pins = &pctl->desc->pins[selector].number;
+ *num_pins = 1;
+
+ return 0;
+}
+
+static const struct pinctrl_ops axp192_pctrl_ops = {
+ .dt_node_to_map = pinconf_generic_dt_node_to_map_group,
+ .dt_free_map = pinconf_generic_dt_free_map,
+ .get_groups_count = axp192_groups_cnt,
+ .get_group_name = axp192_group_name,
+ .get_group_pins = axp192_group_pins,
+};
+
+static int axp192_pctl_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct axp20x_dev *axp20x = dev_get_drvdata(dev->parent);
+ struct axp192_pctl *pctl;
+ struct pinctrl_desc *pctrl_desc;
+ int ret, i;
+
+ pctl = devm_kzalloc(dev, sizeof(*pctl), GFP_KERNEL);
+ if (!pctl)
+ return -ENOMEM;
+
+ pctl->desc = device_get_match_data(dev);
+ pctl->regmap = axp20x->regmap;
+ pctl->regmap_irqc = axp20x->regmap_irqc;
+ pctl->dev = dev;
+
+ pctl->chip.base = -1;
+ pctl->chip.can_sleep = true;
+ pctl->chip.request = gpiochip_generic_request;
+ pctl->chip.free = gpiochip_generic_free;
+ pctl->chip.parent = dev;
+ pctl->chip.label = dev_name(dev);
+ pctl->chip.owner = THIS_MODULE;
+ pctl->chip.get = axp192_gpio_get;
+ pctl->chip.get_direction = axp192_gpio_get_direction;
+ pctl->chip.set = axp192_gpio_set;
+ pctl->chip.direction_input = axp192_gpio_direction_input;
+ pctl->chip.direction_output = axp192_gpio_direction_output;
+ pctl->chip.to_irq = axp192_gpio_to_irq;
+ pctl->chip.ngpio = pctl->desc->npins;
+
+ pctl->irqs = devm_kcalloc(dev, pctl->desc->npins, sizeof(int), GFP_KERNEL);
+ if (!pctl->irqs)
+ return -ENOMEM;
+
+ for (i = 0; i < pctl->desc->npins; i++) {
+ ret = platform_get_irq_byname_optional(pdev, pctl->desc->pins[i].name);
+ if (ret > 0)
+ pctl->irqs[i] = ret;
+ }
+
+ platform_set_drvdata(pdev, pctl);
+
+ pctrl_desc = devm_kzalloc(dev, sizeof(*pctrl_desc), GFP_KERNEL);
+ if (!pctrl_desc)
+ return -ENOMEM;
+
+ pctrl_desc->name = dev_name(dev);
+ pctrl_desc->owner = THIS_MODULE;
+ pctrl_desc->pins = pctl->desc->pins;
+ pctrl_desc->npins = pctl->desc->npins;
+ pctrl_desc->pctlops = &axp192_pctrl_ops;
+ pctrl_desc->pmxops = &axp192_pmx_ops;
+ pctrl_desc->confops = &axp192_conf_ops;
+
+ pctl->pctl_dev = devm_pinctrl_register(dev, pctrl_desc, pctl);
+ if (IS_ERR(pctl->pctl_dev))
+ dev_err_probe(dev, PTR_ERR(pctl->pctl_dev), "couldn't register pinctrl driver\n");
+
+ ret = devm_gpiochip_add_data(dev, &pctl->chip, pctl);
+ if (ret)
+ dev_err_probe(dev, ret, "Failed to register GPIO chip\n");
+
+ return 0;
+}
+
+static const struct of_device_id axp192_pctl_match[] = {
+ { .compatible = "x-powers,axp192-gpio", .data = &axp192_data, },
+ { }
+};
+MODULE_DEVICE_TABLE(of, axp192_pctl_match);
+
+static struct platform_driver axp192_pctl_driver = {
+ .probe = axp192_pctl_probe,
+ .driver = {
+ .name = "axp192-gpio",
+ .of_match_table = axp192_pctl_match,
+ },
+};
+module_platform_driver(axp192_pctl_driver);
+
+MODULE_AUTHOR("Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx>");
+MODULE_DESCRIPTION("AXP192 PMIC pinctrl and GPIO driver");
+MODULE_LICENSE("GPL");
--
2.35.1
