On 6/24/2022 9:35 AM, Bjorn Andersson wrote:
On Tue 21 Jun 11:11 CDT 2022, Sricharan R wrote:
diff --git a/drivers/clk/qcom/gcc-ipq5018.c b/drivers/clk/qcom/gcc-ipq5018.c
[..]
+static const struct clk_parent_data gcc_xo_gpll0_gpll0_out_main_div2[] = {
+ { .fw_name = "xo", .name = "xo", },
Please replace .fw_name with .index based lookup, in line with what was
done in gcc-sc8280xp.c recently.
Sure, understand will fix it.
There's no reason to include global name lookup (.name) in new drivers,
so please omit this part.
ok.
+ { .fw_name = "gpll0", .name = "gpll0", },
+ { .fw_name = "gpll0_out_main_div2", .name = "gpll0_out_main_div2", },
+};
+
[..]
+static struct clk_alpha_pll gpll0_main = {
+ .offset = 0x21000,
+ .regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+ .clkr = {
+ .enable_reg = 0x0b000,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0_main",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "xo",
+ .name = "xo",
Are you referring to the board XO here, or the CXO pin on the SoC? On
many platforms these are not the same...
board XO, will refer your above example and fix it here as well
Please omit the .name here as well and as this is used a few times,
please create a struct clk_parent_data for this parent.
ok.
+ },
+ .num_parents = 1,
+ .ops = &clk_alpha_pll_stromer_ops,
+ .flags = CLK_IS_CRITICAL,
+ },
+ },
+};
+
+static struct clk_fixed_factor gpll0_out_main_div2 = {
+ .mult = 1,
+ .div = 2,
+ .hw.init = &(struct clk_init_data){
+ .name = "gpll0_out_main_div2",
+ .parent_data = &(const struct clk_parent_data){
It would be nice to have a space inbetween ) and { in all these.
ok.
+ .fw_name = "gpll0_main",
+ .name = "gpll0_main",
+ },
+ .num_parents = 1,
+ .ops = &clk_fixed_factor_ops,
+ .flags = CLK_SET_RATE_PARENT,
+ },
+};
[..]
+static struct clk_branch gcc_gephy_tx_clk = {
+ .halt_reg = 0x56014,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x56014,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data){
+ .name = "gcc_gephy_tx_clk",
+ .parent_data = &(const struct clk_parent_data){
+ .fw_name = "gmac0_tx_div_clk_src",
+ .name = "gmac0_tx_div_clk_src",
+ },
This parent_data is repeated multiple times, but more importantly it's
not an external clock, so you should use .parent_hw instead of
.parent_data.
Please review the parent for all your clocks.
ok, will do.
Regards,
Sricharan
