The IPQ5018 is Qualcomm's 802.11ax SoC for Routers,
Gateways and Access Points.
This series adds minimal board boot support for ipq5018-mp03.1-c2 board.
[v2]
Fixed all comments and rebased for TOT.
Varadarajan Narayanan (8):
clk: qcom: clk-alpha-pll: Add support for Stromer PLLs
dt-bindings: arm64: ipq5018: Add binding descriptions for clock and
reset
clk: qcom: Add Global Clock controller (GCC) driver for IPQ5018
dt-bindings: pinctrl: qcom: Add ipq5018 pinctrl bindings
pinctrl: qcom: Add IPQ5018 pinctrl driver
dt-bindings: qcom: Add ipq5018 bindings
arm64: dts: Add ipq5018 SoC and MP03 board support
arm64: defconfig: Enable IPQ5018 SoC base configs
.../devicetree/bindings/arm/qcom.yaml | 7 +
.../bindings/clock/qcom,gcc-other.yaml | 3 +
.../pinctrl/qcom,ipq5018-pinctrl.yaml | 145 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts | 29 +
arch/arm64/boot/dts/qcom/ipq5018.dtsi | 221 +
arch/arm64/configs/defconfig | 3 +
drivers/clk/qcom/Kconfig | 7 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/clk-alpha-pll.c | 100 +-
drivers/clk/qcom/clk-alpha-pll.h | 7 +-
drivers/clk/qcom/gcc-ipq5018.c | 3995 +++++++++++++++++
drivers/pinctrl/qcom/Kconfig | 10 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-ipq5018.c | 791 ++++
include/dt-bindings/clock/qcom,gcc-ipq5018.h | 188 +
include/dt-bindings/reset/qcom,gcc-ipq5018.h | 122 +
17 files changed, 5629 insertions(+), 2 deletions(-)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,ipq5018-pinctrl.yaml
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018-mp03.1-c2.dts
create mode 100644 arch/arm64/boot/dts/qcom/ipq5018.dtsi
create mode 100644 drivers/clk/qcom/gcc-ipq5018.c
create mode 100644 drivers/pinctrl/qcom/pinctrl-ipq5018.c
create mode 100644 include/dt-bindings/clock/qcom,gcc-ipq5018.h
create mode 100644 include/dt-bindings/reset/qcom,gcc-ipq5018.h
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
