Move properties common to all DPU DT nodes to the dpu-common.yaml Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> --- .../bindings/display/msm/dpu-common.yaml | 47 +++++++++++++++++++ .../bindings/display/msm/dpu-msm8998.yaml | 28 ++--------- .../bindings/display/msm/dpu-qcm2290.yaml | 29 ++---------- .../bindings/display/msm/dpu-sc7180.yaml | 32 ++----------- .../bindings/display/msm/dpu-sc7280.yaml | 32 ++----------- .../bindings/display/msm/dpu-sdm845.yaml | 32 ++----------- 6 files changed, 67 insertions(+), 133 deletions(-) create mode 100644 Documentation/devicetree/bindings/display/msm/dpu-common.yaml diff --git a/Documentation/devicetree/bindings/display/msm/dpu-common.yaml b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml new file mode 100644 index 000000000000..f3465ee3a4ab --- /dev/null +++ b/Documentation/devicetree/bindings/display/msm/dpu-common.yaml @@ -0,0 +1,47 @@ +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/msm/dpu-common.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Qualcomm Display DPU dt properties (common properties) + +maintainers: + - Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxx> + - Krishna Manikandan <quic_mkrishn@xxxxxxxxxxx> + - Rob Clark <robdclark@xxxxxxxxx> + +description: | + Device tree bindings for the DPU display controller, common properties. + +properties: + interrupts: + maxItems: 1 + + power-domains: + maxItems: 1 + + operating-points-v2: true + + ports: + $ref: /schemas/graph.yaml#/properties/ports + description: | + Contains the list of output ports from DPU device. These ports + connect to interfaces that are external to the DPU hardware, + such as DSI, DP etc. Each output port contains an endpoint that + describes how it is connected to an external interface. + +patternProperties: + (mdp-)?opp-table: + $ref: /schemas/opp/opp-v2.yaml# + +required: + - compatible + - reg + - reg-names + - clocks + - interrupts + - power-domains + - operating-points-v2 + - ports + +additionalProperties: true diff --git a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml index 5caf46a1dd88..2207601c83df 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-msm8998.yaml @@ -47,21 +47,8 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true ports: $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - properties: port@0: $ref: /schemas/graph.yaml#/properties/port @@ -75,17 +62,10 @@ properties: - port@0 - port@1 -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml index 8027319b1aad..8a0d6eda6e7c 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-qcm2290.yaml @@ -43,22 +43,8 @@ properties: - const: lut - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - ports: $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI. Each output port contains an endpoint that - describes how it is connected to an external interface. - properties: port@0: $ref: /schemas/graph.yaml#/properties/port @@ -67,17 +53,10 @@ properties: required: - port@0 -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml index 42921f25baa4..1047192b5b36 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7180.yaml @@ -45,25 +45,8 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - mdp-opp-table: - $ref: /schemas/opp/opp-v2.yaml# - ports: $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - properties: port@0: $ref: /schemas/graph.yaml#/properties/port @@ -76,17 +59,10 @@ properties: required: - port@0 -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml index 49c4a055d20f..543d90a84853 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sc7280.yaml @@ -44,25 +44,8 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - opp-table: - $ref: /schemas/opp/opp-v2.yaml# - ports: $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - properties: port@0: $ref: /schemas/graph.yaml#/properties/port @@ -75,17 +58,10 @@ properties: required: - port@0 -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | diff --git a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml index cc95adcf8f11..796c13d73ea3 100644 --- a/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml +++ b/Documentation/devicetree/bindings/display/msm/dpu-sdm845.yaml @@ -43,25 +43,8 @@ properties: - const: core - const: vsync - interrupts: - maxItems: 1 - - power-domains: - maxItems: 1 - - operating-points-v2: true - - mdp-opp-table: - $ref: /schemas/opp/opp-v2.yaml# - ports: $ref: /schemas/graph.yaml#/properties/ports - description: | - Contains the list of output ports from DPU device. These ports - connect to interfaces that are external to the DPU hardware, - such as DSI, DP etc. Each output port contains an endpoint that - describes how it is connected to an external interface. - properties: port@0: $ref: /schemas/graph.yaml#/properties/port @@ -75,17 +58,10 @@ properties: - port@0 - port@1 -required: - - compatible - - reg - - reg-names - - clocks - - interrupts - - power-domains - - operating-points-v2 - - ports - -additionalProperties: false +allOf: + - $ref: "/schemas/display/msm/dpu-common.yaml#" + +unevaluatedProperties: false examples: - | -- 2.35.1
