[PATCH V4 10/11] soc: bcm: bcm2835-power: Add support for BCM2711's RPiVid ASB

[Stefan Wahren <stefan.wahren@xxxxxxxx>]

In BCM2711 the new RPiVid ASB took over V3D. The old ASB is still present
with the ISP and H264 bits, and V3D is in the same place in the new ASB
as the old one.

Use the fact that 'pm->rpivid_asb' is populated as a hint that we're on
BCM2711.

Signed-off-by: Stefan Wahren <stefan.wahren@xxxxxxxx>
Reviewed-by: Peter Robinson <pbrobinson@xxxxxxxxx>
---
 drivers/soc/bcm/bcm2835-power.c | 25 +++++++++++++++++++++++--
 1 file changed, 23 insertions(+), 2 deletions(-)

diff --git a/drivers/soc/bcm/bcm2835-power.c b/drivers/soc/bcm/bcm2835-power.c
index 9c352f66e6d5..1e06d91c0739 100644
--- a/drivers/soc/bcm/bcm2835-power.c
+++ b/drivers/soc/bcm/bcm2835-power.c
@@ -126,6 +126,8 @@
 
 #define ASB_AXI_BRDG_ID			0x20
 
+#define BCM2835_BRDG_ID			0x62726467
+
 struct bcm2835_power_domain {
 	struct generic_pm_domain base;
 	struct bcm2835_power *power;
@@ -139,6 +141,8 @@ struct bcm2835_power {
 	void __iomem		*base;
 	/* AXI Async bridge registers. */
 	void __iomem		*asb;
+	/* RPiVid bridge registers. */
+	void __iomem		*rpivid_asb;
 
 	struct genpd_onecell_data pd_xlate;
 	struct bcm2835_power_domain domains[BCM2835_POWER_DOMAIN_COUNT];
@@ -151,8 +155,15 @@ static int bcm2835_asb_control(struct bcm2835_power *power, u32 reg, bool enable
 	u64 start;
 	u32 val;
 
-	if (!reg)
+	switch (reg) {
+	case 0:
 		return 0;
+	case ASB_V3D_S_CTRL:
+	case ASB_V3D_M_CTRL:
+		if (power->rpivid_asb)
+			base = power->rpivid_asb;
+		break;
+	}
 
 	start = ktime_get_ns();
 
@@ -621,13 +632,23 @@ static int bcm2835_power_probe(struct platform_device *pdev)
 	power->dev = dev;
 	power->base = pm->base;
 	power->asb = pm->asb;
+	power->rpivid_asb = pm->rpivid_asb;
 
 	id = readl(power->asb + ASB_AXI_BRDG_ID);
-	if (id != 0x62726467 /* "BRDG" */) {
+	if (id != BCM2835_BRDG_ID /* "BRDG" */) {
 		dev_err(dev, "ASB register ID returned 0x%08x\n", id);
 		return -ENODEV;
 	}
 
+	if (power->rpivid_asb) {
+		id = readl(power->rpivid_asb + ASB_AXI_BRDG_ID);
+		if (id != BCM2835_BRDG_ID /* "BRDG" */) {
+			dev_err(dev, "RPiVid ASB register ID returned 0x%08x\n",
+				     id);
+			return -ENODEV;
+		}
+	}
+
 	power->pd_xlate.domains = devm_kcalloc(dev,
 					       ARRAY_SIZE(power_domain_names),
 					       sizeof(*power->pd_xlate.domains),
-- 
2.25.1