Re: [PATCH] powerpc: dts: Add DTS file for CZ.NIC Turris 1.x routers

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Pali Rohár <pali@xxxxxxxxxx> writes:
> CZ.NIC Turris 1.0 and 1.1 are open source routers, they have dual-core
> PowerPC Freescale P2020 CPU and are based on Freescale P2020RDB-PC-A board.
> Hardware design is fully open source, all firmware and hardware design
> files are available at Turris project website:
>
> https://docs.turris.cz/hw/turris-1x/turris-1x/
> https://project.turris.cz/en/hardware.html
>
> Signed-off-by: Pali Rohár <pali@xxxxxxxxxx>
> ---
>  arch/powerpc/boot/dts/turris1x.dts | 470 +++++++++++++++++++++++++++++
>  1 file changed, 470 insertions(+)
>  create mode 100644 arch/powerpc/boot/dts/turris1x.dts

The headers say you Cc'ed this to the devicetree list, but I don't see
it in the devicetree patchwork:

  https://patchwork.ozlabs.org/project/devicetree-bindings/list/?state=*&q=turris&archive=both

Which means it hasn't been run through Rob's CI scripts.

Maybe try a resend?

cheers




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux