On 23-06-22, 01:28, Robert Foss wrote: > The GPUCC manages the clocks for the Adreno GPU found on the > sm8350 SoCs. > > Signed-off-by: Robert Foss <robert.foss@xxxxxxxxxx> > Signed-off-by: Jonathan Marek <jonathan@xxxxxxxx> > --- > > Changes since v1 > - Remove .name assignments for clk_parent_data - Dmitry > - Use ARRAY_SIZE where possible - Dmitry > - Remove commented out code - Dmitry > - Set CLAMP_IO flag for gpu_gx_gdsc - Dmitry > - Assign .parent_hws instead of .hw - Dmitry > > Changes since v2 > - Switch license to dual BSD/GPL - Bjorn > - Add Jonathans SoB - Jonathan > - Add Linaro to copyright statement - Bjorn > - Make .hw.init assignment const - Bjorn > - Extract & deduplicate bi_tcxo parent_data - Bjorn > - Removed further .name assignment - Bjorn > - Move of_device_id declaration - Bjorn > > Changes since v3 > - Change license to BSD/GPL - Rob/Bjorn > - Switch from .fw_name to .index > > Changes since v4 > - Change year of copyright statement > - Change to dual license for header file - Rob > > Changes since v5 > - Change hex to lower case - Konrad > > Changes since v6 > - Change hex to lower case - Konrad > - Change license go GPL 2.0 only - Konrad > > > drivers/clk/qcom/Kconfig | 8 + > drivers/clk/qcom/Makefile | 1 + > drivers/clk/qcom/gpucc-sm8350.c | 637 ++++++++++++++++++++++++++++++++ > 3 files changed, 646 insertions(+) > create mode 100644 drivers/clk/qcom/gpucc-sm8350.c > > diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig > index bc4dcf356d82..b11235c21952 100644 > --- a/drivers/clk/qcom/Kconfig > +++ b/drivers/clk/qcom/Kconfig > @@ -712,6 +712,14 @@ config SM_GPUCC_8250 > Say Y if you want to support graphics controller devices and > functionality such as 3D graphics. > > +config SM_GPUCC_8350 > + tristate "SM8350 Graphics Clock Controller" > + select SM_GCC_8350 > + help > + Support for the graphics clock controller on SM8350 devices. > + Say Y if you want to support graphics controller devices and > + functionality such as 3D graphics. > + > config SM_VIDEOCC_8150 > tristate "SM8150 Video Clock Controller" > select SM_GCC_8150 > diff --git a/drivers/clk/qcom/Makefile b/drivers/clk/qcom/Makefile > index 36789f5233ef..ef9c64824424 100644 > --- a/drivers/clk/qcom/Makefile > +++ b/drivers/clk/qcom/Makefile > @@ -101,6 +101,7 @@ obj-$(CONFIG_SM_GCC_8450) += gcc-sm8450.o > obj-$(CONFIG_SM_GPUCC_6350) += gpucc-sm6350.o > obj-$(CONFIG_SM_GPUCC_8150) += gpucc-sm8150.o > obj-$(CONFIG_SM_GPUCC_8250) += gpucc-sm8250.o > +obj-$(CONFIG_SM_GPUCC_8350) += gpucc-sm8350.o > obj-$(CONFIG_SM_VIDEOCC_8150) += videocc-sm8150.o > obj-$(CONFIG_SM_VIDEOCC_8250) += videocc-sm8250.o > obj-$(CONFIG_SPMI_PMIC_CLKDIV) += clk-spmi-pmic-div.o > diff --git a/drivers/clk/qcom/gpucc-sm8350.c b/drivers/clk/qcom/gpucc-sm8350.c > new file mode 100644 > index 000000000000..d13fa813d190 > --- /dev/null > +++ b/drivers/clk/qcom/gpucc-sm8350.c > @@ -0,0 +1,637 @@ > +// SPDX-License-Identifier: GPL-2.0 > +/* > + * Copyright (c) 2019-2020, The Linux Foundation. All rights reserved. > + * Copyright (c) 2022, Linaro Limited > + */ > + > +#include <linux/clk.h> > +#include <linux/err.h> > +#include <linux/kernel.h> > +#include <linux/module.h> > +#include <linux/of_device.h> > +#include <linux/of.h> > +#include <linux/regmap.h> > + > +#include <dt-bindings/clock/qcom,gpucc-sm8350.h> > + > +#include "clk-alpha-pll.h" > +#include "clk-branch.h" > +#include "clk-pll.h" > +#include "clk-rcg.h" > +#include "clk-regmap.h" > +#include "common.h" > +#include "clk-regmap-mux.h" > +#include "clk-regmap-divider.h" > +#include "gdsc.h" > +#include "reset.h" nit: this could be sorted alphabetically. Otherwise looks good to me Reviewed-by: Vinod Koul <vkoul@xxxxxxxxxx> -- ~Vinod
