On 22.06.2022 08:38:04, Andrejs Cainikovs wrote:
> > > > can1: can@0 {
> > > > compatible = "microchip,mcp251xfd";
> > > > - clocks = <&clk20m>;
> > > > + clocks = <&clk40m>;
> > > > interrupts-extended = <&gpio1 6
> > > > IRQ_TYPE_EDGE_FALLING>;
> >
> > You don't want to use an edge triggered interrupt with the mcp251xfd
> > chip. You will be losing interrupts, better use IRQ_TYPE_LEVEL_LOW.
>
> This particular change is not about interrupts.
Sure, I just noticed it.
> But thanks for a hint, I'll make sure this is addressed.
Thanks,
Marc
--
Pengutronix e.K. | Marc Kleine-Budde |
Embedded Linux | https://www.pengutronix.de |
Vertretung West/Dortmund | Phone: +49-231-2826-924 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Attachment:
signature.asc
Description: PGP signature
