Re: [PATCHv4 2/6] ARM: dts: Add initial LS1021A QDS board dts support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On Mon, Sep 22, 2014 at 03:45:48PM +0800, Jingchang Lu wrote:
> From: Jingchang Lu <b35083@xxxxxxxxxxxxx>
> 
> Signed-off-by: Alison Wang <alison.wang@xxxxxxxxxxxxx>
> Signed-off-by: Chao Fu <B44548@xxxxxxxxxxxxx>
> Signed-off-by: Jason Jin <Jason.Jin@xxxxxxxxxxxxx>
> Signed-off-by: Xiubo Li <Li.Xiubo@xxxxxxxxxxxxx>
> Signed-off-by: Bhupesh Sharma <bhupesh.sharma@xxxxxxxxxxxxx>
> Signed-off-by: Jaiprakash Singh <b44839@xxxxxxxxxxxxx>
> Signed-off-by: Jingchang Lu <jingchang.lu@xxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/Makefile        |   1 +
>  arch/arm/boot/dts/ls1021a-qds.dts | 285 ++++++++++++++++++++++++++++++++++++++
>  2 files changed, 286 insertions(+)
>  create mode 100644 arch/arm/boot/dts/ls1021a-qds.dts
> 
> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
> index e12fe46..384aa74 100644
> --- a/arch/arm/boot/dts/Makefile
> +++ b/arch/arm/boot/dts/Makefile
> @@ -245,6 +245,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
>  	imx6q-tx6q-1110.dtb \
>  	imx6sl-evk.dtb \
>  	imx6sx-sdb.dtb \
> +	ls1021a-qds.dtb \
>  	vf610-colibri-eval-v3.dtb \
>  	vf610-cosmic.dtb \
>  	vf610-twr.dtb
> diff --git a/arch/arm/boot/dts/ls1021a-qds.dts b/arch/arm/boot/dts/ls1021a-qds.dts
> new file mode 100644
> index 0000000..a0a95f51
> --- /dev/null
> +++ b/arch/arm/boot/dts/ls1021a-qds.dts
> @@ -0,0 +1,285 @@
> +/*
> + * Copyright 2013-2014 Freescale Semiconductor, Inc.
> + *
> + * This program is free software; you can redistribute it and/or modify
> + * it under the terms of the GNU General Public License as published by
> + * the Free Software Foundation; either version 2 of the License, or
> + * (at your option) any later version.
> + */
> +
> +/dts-v1/;
> +#include "ls1021a.dtsi"
> +
> +/ {
> +	model = "LS1021A QDS Board";
> +
> +	aliases {
> +		enet0_rgmii_phy = &rgmii_phy1;
> +		enet1_rgmii_phy = &rgmii_phy2;
> +		enet2_rgmii_phy = &rgmii_phy3;
> +		enet0_sgmii_phy = &sgmii_phy1c;
> +		enet1_sgmii_phy = &sgmii_phy1d;
> +	};
> +
> +	soc {
> +		leds {

I think leds are board level devices and do not have to be under node
"soc"?

> +			compatible = "pwm-leds";

Please have a new line between property list and device node ...

> +			led0 {

Usually, the instance number shouldn't be directly encoded in node name,
but be part of node name in form of unit-address, i.e. led@0.  That also
means we will need a 'reg' property for the node and the following for
the parent node.

	#address-cells = <1>;
	#size-cells = <0>;


> +				label = "led0";
> +				pwms = <&pwm3 0 150000 0>;
> +				max-brightness = <100>;
> +			};

Please also put a new line between device nodes.

> +			led1 {
> +				label = "led1";
> +				pwms = <&pwm3 1 150000 0>;
> +				max-brightness = <100>;
> +			};
> +			led2 {
> +				label = "led2";
> +				pwms = <&pwm3 2 150000 0>;
> +				max-brightness = <100>;
> +			};
> +			led3 {
> +				label = "led3";
> +				pwms = <&pwm3 3 150000 0>;
> +				max-brightness = <100>;
> +			};
> +			led4 {
> +				label = "led4";
> +				pwms = <&pwm3 4 150000 0>;
> +				max-brightness = <100>;
> +			};
> +			led5 {
> +				label = "led5";
> +				pwms = <&pwm3 5 150000 0>;
> +				max-brightness = <100>;
> +			};
> +			led6 {
> +				label = "led6";
> +				pwms = <&pwm3 6 150000 0>;
> +				max-brightness = <100>;
> +			};
> +			led7 {
> +				label = "led7";
> +				pwms = <&pwm3 7 150000 0>;
> +				max-brightness = <100>;
> +			};
> +		};
> +	};
> +};
> +
> +&dspi0 {
> +	bus-num = <0>;
> +	status = "okay";
> +
> +	dspiflash: at45db021d@0 {
> +		#address-cells = <1>;
> +		#size-cells = <1>;
> +		compatible = "atmel,at45db021d", "atmel,at45", "atmel,dataflash";
> +		spi-max-frequency = <16000000>;
> +		spi-cpol;
> +		spi-cpha;
> +		reg = <0>;
> +	};
> +};
> +
> +&enet0 {
> +	tbi-handle = <&tbi0>;

I cannot find this property in any binding doc.

> +	phy-handle = <&sgmii_phy1c>;
> +	phy-connection-type = "sgmii";
> +	status = "okay";
> +};
> +
> +&enet1 {
> +	tbi-handle = <&tbi0>;
> +	phy-handle = <&sgmii_phy1d>;
> +	phy-connection-type = "sgmii";
> +	status = "okay";
> +};
> +
> +&enet2 {
> +	phy-handle = <&rgmii_phy3>;
> +	phy-connection-type = "rgmii-id";
> +	status = "okay";
> +};
> +
> +&i2c0 {
> +	status = "okay";

Add a new line.

> +	pca9547@77 {
> +		compatible = "philips,pca9547";

Undocumented compatible.

> +		reg = <0x77>;
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +
> +		i2c@0 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x0>;
> +
> +			rtc@68 {
> +				compatible = "dallas,ds3232";
> +				reg = <0x68>;
> +				interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
> +			};
> +		};
> +
> +		i2c@2 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x2>;
> +
> +			ina220@40 {
> +				compatible = "ti,ina220";
> +				reg = <0x40>;
> +				shunt-resistor = <1000>;
> +			};
> +
> +			ina220@41 {
> +				compatible = "ti,ina220";
> +				reg = <0x41>;
> +				shunt-resistor = <1000>;
> +			};
> +		};
> +
> +		i2c@3 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x3>;
> +
> +			eeprom@56 {
> +				compatible = "at24,24c512";

Undocumented property.

> +				reg = <0x56>;
> +			};
> +
> +			eeprom@57 {
> +				compatible = "at24,24c512";
> +				reg = <0x57>;
> +			};
> +
> +			adt7461a@4c {
> +				compatible = "adt7461a";

Shouldn't it be "adi,adt7461a"?  And if that's case, per
Documentation/devicetree/bindings/hwmon/lm90.txt, vcc-supply is a
required property.

> +				reg = <0x4c>;
> +			};
> +		};
> +
> +		i2c@4 {
> +			#address-cells = <1>;
> +			#size-cells = <0>;
> +			reg = <0x4>;
> +		};

What's this device?  Drop it and add it only when you actually need it.

> +	};
> +};
> +
> +&ifc {
> +	status = "okay";

I generally prefer to put 'status' at the bottom of the property list.

> +	#address-cells = <2>;
> +	#size-cells = <1>;
> +	/* NOR, NAND Flashes and FPGA on board */
> +	ranges = <0x0 0x0 0x0 0x60000000 0x08000000
> +		0x2 0x0 0x0 0x7e800000 0x00010000
> +		0x3 0x0 0x0 0x7fb00000 0x00000100>;
> +
> +		nor@0,0 {

Drop one level of indentation.

> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "cfi-flash";
> +			reg = <0x0 0x0 0x8000000>;
> +			bank-width = <2>;
> +			device-width = <1>;
> +		};
> +
> +		nand@2,0 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "fsl,ifc-nand";

"fsl,ifc" is a documented property, but "fsl,ifc-nand" is not.

> +			reg = <0x2 0x0 0x10000>;
> +		};
> +
> +		fpga: board-control@3,0 {
> +			#address-cells = <1>;
> +			#size-cells = <1>;
> +			compatible = "simple-bus";
> +			reg = <0x3 0x0 0x0000100>;
> +			bank-width = <1>;
> +			device-width = <1>;
> +			ranges = <0 3 0 0x100>;
> +
> +			mdio-mux-emi1 {
> +				compatible = "mdio-mux-mmioreg";
> +				mdio-parent-bus = <&mdio0>;
> +				#address-cells = <1>;
> +				#size-cells = <0>;
> +				reg = <0x54 1>; /* BRDCFG4 */
> +				mux-mask = <0xe0>; /* EMI1[2:0] */
> +
> +				/* Onboard PHYs */
> +				ls1021amdio0: mdio@0 {
> +					reg = <0>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					rgmii_phy1: ethernet-phy@1 {
> +						reg = <0x1>;
> +					};
> +				};

Have a new line.

Shawn

> +				ls1021amdio1: mdio@20 {
> +					reg = <0x20>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					rgmii_phy2: ethernet-phy@2 {
> +						reg = <0x2>;
> +					};
> +				};
> +				ls1021amdio2: mdio@40 {
> +					reg = <0x40>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					rgmii_phy3: ethernet-phy@3 {
> +						reg = <0x3>;
> +					};
> +				};
> +				ls1021amdio3: mdio@60 {
> +					reg = <0x60>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					sgmii_phy1c: ethernet-phy@1c {
> +						reg = <0x1c>;
> +					};
> +				};
> +				ls1021amdio4: mdio@80 {
> +					reg = <0x80>;
> +					#address-cells = <1>;
> +					#size-cells = <0>;
> +					sgmii_phy1d: ethernet-phy@1d {
> +						reg = <0x1d>;
> +					};
> +				};
> +			};
> +		};
> +};
> +
> +&lpuart0 {
> +	status = "okay";
> +};
> +
> +&mdio0 {
> +	tbi0: tbi-phy@8 {
> +		reg = <0x8>;
> +		device_type = "tbi-phy";
> +	};
> +};
> +
> +&pwm3 {
> +	status = "okay";
> +};
> +
> +&pwm7 {
> +	status = "okay";
> +};
> +
> +&uart0 {
> +	status = "okay";
> +};
> +
> +&uart1 {
> +	status = "okay";
> +};
> -- 
> 1.8.0
> 
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]
  Powered by Linux