From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> DP_INTF is similar to DPI but does not have the exact same feature set or register layouts. DP_INTF is the sink of the display pipeline that is connected to the DisplayPort controller and encoder unit. It takes the same clocks as DPI. In this patch, we also do these string replacement: - s/mediatek/MediaTek/ in title. - s/Mediatek/MediaTek/ in description. Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx> [Bo-Chen: Modify reviewers' comments.] Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx> --- .../bindings/display/mediatek/mediatek,dpi.yaml | 11 ++++++----- 1 file changed, 6 insertions(+), 5 deletions(-) diff --git a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml index 77ee1b923991..d72f74632038 100644 --- a/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml +++ b/Documentation/devicetree/bindings/display/mediatek/mediatek,dpi.yaml @@ -4,16 +4,16 @@ $id: http://devicetree.org/schemas/display/mediatek/mediatek,dpi.yaml# $schema: http://devicetree.org/meta-schemas/core.yaml# -title: mediatek DPI Controller Device Tree Bindings +title: MediaTek DPI and DP_INTF Controller maintainers: - CK Hu <ck.hu@xxxxxxxxxxxx> - Jitao shi <jitao.shi@xxxxxxxxxxxx> description: | - The Mediatek DPI function block is a sink of the display subsystem and - provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a parallel - output bus. + The MediaTek DPI and DP_INTF function blocks are a sink of the display + subsystem and provides 8-bit RGB/YUV444 or 8/10/10-bit YUV422 pixel data on a + parallel output bus. properties: compatible: @@ -24,6 +24,7 @@ properties: - mediatek,mt8183-dpi - mediatek,mt8186-dpi - mediatek,mt8192-dpi + - mediatek,mt8195-dp_intf reg: maxItems: 1 @@ -55,7 +56,7 @@ properties: $ref: /schemas/graph.yaml#/properties/port description: Output port node. This port should be connected to the input port of an - attached HDMI or LVDS encoder chip. + attached HDMI, LVDS or DisplayPort encoder chip. required: - compatible -- 2.18.0
