The rk3399-roc-pc never finish booting because it is powered off when probing fusb302. The type c port is disabled because not present in DT as can seen in dmesg: OF: graph: no port node found in /i2c@ff3d0000/usb-typec@22 So adding the port in DT (as needed by the device tree schema of fusb302), permits the board to survive and finish booting. CC: stable@xxxxxxxxxx # 5.10+ Fixes: 8bb878cf20ae ("arm64: dts: rockchip: add support for ROC-RK3399-PC board") Signed-off-by: Corentin Labbe <clabbe@xxxxxxxxxxxx> --- This patch is tested on 5.10.123, 5.15.48 and next-20220614 arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi | 16 ++++++++++++++++ 1 file changed, 16 insertions(+) diff --git a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi index 0e45cc2d195b..60c400ca4034 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-roc-pc.dtsi @@ -552,6 +552,22 @@ fusb0: usb-typec@22 { pinctrl-0 = <&fusb0_int>; vbus-supply = <&vcc_vbus_typec0>; status = "okay"; + + connector { + compatible = "usb-c-connector"; + data-role = "host"; + label = "USB-C"; + power-role = "dual"; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + reg = <0>; + }; + }; + }; }; mp8859: regulator@66 { -- 2.35.1