Quoting Maxime Ripard (2014-09-13 03:26:03) > On Fri, Sep 12, 2014 at 11:16:26AM +0800, Chen-Yu Tsai wrote: > > Hi, > > > > On Fri, Sep 12, 2014 at 5:02 AM, Maxime Ripard > > <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: > > > Hi, > > > > > > On Sat, Sep 06, 2014 at 06:47:24PM +0800, Chen-Yu Tsai wrote: > > >> This patch unifies the sun6i AHB1 clock, originally supported > > >> with separate mux and divider clks. It also adds support for > > >> the pre-divider on the PLL6 input, thus allowing the clock to > > >> be muxed to PLL6 with proper clock rate calculation. > > >> > > >> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> > > > > > > It looks fine, but I'd rather see this in a separate file, especially > > > since we don't seem to have any order dependency. > > > > Sorry, just to be clear, separate file under clk/sunxi? > > Yes > > > This cannot be in a separate file, as it shares a spinlock with apb1 > > divider. They share the same register. > > > > We could move apb1 out though. But i would prefer to do that when > > we split out all the clocks into individual OF_CLK_DECLAREs. > > Ah right, my bad :) > > My plan on the long term is to kill clk-sunxi as a place where all the > clocks are defined, and only leave the "policy" there, for example the > clock protection code (even if that should probably be removed too, > together with clkdev), the various rates / parenting enforcements, > etc. Interesting! Where are you planning to store the clock data? Regards, Mike > > Maxime > > -- > Maxime Ripard, Free Electrons > Embedded Linux, Kernel and Android engineering > http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
