Hi, On Fri, Sep 12, 2014 at 5:02 AM, Maxime Ripard <maxime.ripard@xxxxxxxxxxxxxxxxxx> wrote: > Hi, > > On Sat, Sep 06, 2014 at 06:47:24PM +0800, Chen-Yu Tsai wrote: >> This patch unifies the sun6i AHB1 clock, originally supported >> with separate mux and divider clks. It also adds support for >> the pre-divider on the PLL6 input, thus allowing the clock to >> be muxed to PLL6 with proper clock rate calculation. >> >> Signed-off-by: Chen-Yu Tsai <wens@xxxxxxxx> > > It looks fine, but I'd rather see this in a separate file, especially > since we don't seem to have any order dependency. Sorry, just to be clear, separate file under clk/sunxi? This cannot be in a separate file, as it shares a spinlock with apb1 divider. They share the same register. We could move apb1 out though. But i would prefer to do that when we split out all the clocks into individual OF_CLK_DECLAREs. ChenYu -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
