On Sat, 18 Jun 2022 22:39:59 +0100, Aidan MacDonald wrote: > The AXP192 PMIC is different enough from the PMICs supported by > the AXP20x GPIO driver to warrant a separate driver. The AXP192 > driver also supports interrupts and pinconf settings. > > Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@xxxxxxxxx> > --- > .../bindings/gpio/x-powers,axp192-gpio.yaml | 68 +++++++++++++++++++ > 1 file changed, 68 insertions(+) > create mode 100644 Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.yaml > My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check' on your patch (DT_CHECKER_FLAGS is new in v5.13): yamllint warnings/errors: dtschema/dtc warnings/errors: Documentation/devicetree/bindings/gpio/x-powers,axp192-gpio.example.dts:18.26-23.11: Warning (unit_address_vs_reg): /example-0/gpio@0: node has a unit name, but no reg or ranges property doc reference errors (make refcheckdocs): See https://patchwork.ozlabs.org/patch/ This check can fail if there are any dependencies. The base for a patch series is generally the most recent rc1. If you already ran 'make dt_binding_check' and didn't see the above error(s), then make sure 'yamllint' is installed and dt-schema is up to date: pip3 install dtschema --upgrade Please check and re-submit.
