On 16/06/2022 07:22, Alexander Stein wrote: > This adds support for TQMa8MPQL module on MBa8MPxL board. > > Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx> > --- > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 689 ++++++++++++++++++ > .../boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 284 ++++++++ > 3 files changed, 974 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi > > diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile > index c288bda8aa36..ab8e61d4dd7c 100644 > --- a/arch/arm64/boot/dts/freescale/Makefile > +++ b/arch/arm64/boot/dts/freescale/Makefile > @@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb > +dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb > dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb > diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > new file mode 100644 > index 000000000000..e9755bd7619c > --- /dev/null > +++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts > @@ -0,0 +1,689 @@ > +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT > +/* > + * Copyright 2021-2022 TQ-Systems GmbH > + * Author: Alexander Stein <alexander.stein@xxxxxxxxxxxx> > + */ > + > +/dts-v1/; > + > +#include <dt-bindings/net/ti-dp83867.h> > +#include <dt-bindings/pwm/pwm.h> > +#include "imx8mp-tqma8mpql.dtsi" > + > +/ { > + model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL"; > + compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp"; > + > + chosen { > + stdout-path = &uart4; > + }; > + > + iio-hwmon { > + compatible = "iio-hwmon"; > + io-channels = <&adc 0>, <&adc 1>; > + }; > + > + aliases { > + mmc0 = &usdhc3; > + mmc1 = &usdhc2; > + mmc2 = &usdhc1; > + rtc0 = &pcf85063; > + rtc1 = &snvs_rtc; > + spi0 = &flexspi; > + spi1 = &ecspi1; > + spi2 = &ecspi2; > + spi3 = &ecspi3; > + }; > + > + backlight_lvds: backlight-lvds { > + compatible = "pwm-backlight"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_bllvds>; > + pwms = <&pwm2 0 5000000 0>; > + power-supply = <®_vcc_12v0>; > + enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>; > + status = "disabled"; > + }; > + > + gpio-keys { > + compatible = "gpio-keys"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpiobutton>; > + autorepeat; > + > + switch1 { swtich-1 > + label = "S12"; > + linux,code = <BTN_0>; > + gpios = <&gpio5 26 GPIO_ACTIVE_LOW>; > + }; > + > + switch2 { switch-2 > + label = "S13"; > + linux,code = <BTN_1>; > + gpios = <&gpio5 27 GPIO_ACTIVE_LOW>; > + }; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_gpioled>; > + > + led0 { led-0 > + label = "led0"; Your label should be more useful... or just replace it with function and color. > + gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "default-on"; > + }; > + > + led1 { led-1 > + label = "led1"; > + gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>; > + linux,default-trigger = "heartbeat"; > + }; > + > + led2 { led-2 > + label = "led2"; > + gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>; > + }; > + }; > + > + lvds_panel: display { > + pinctrl-names = "default"; > + pinctrl-0 = <&pinctrl_lvdspanel>; > + enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>; > + backlight = <&backlight_lvds>; > + status = "disabled"; What's this node about? There is no compatible. Best regards, Krzysztof