This adds support for TQMa8MPQL module on MBa8MPxL board.
Signed-off-by: Alexander Stein <alexander.stein@xxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/freescale/Makefile | 1 +
.../freescale/imx8mp-tqma8mpql-mba8mpxl.dts | 689 ++++++++++++++++++
.../boot/dts/freescale/imx8mp-tqma8mpql.dtsi | 284 ++++++++
3 files changed, 974 insertions(+)
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
create mode 100644 arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile
index c288bda8aa36..ab8e61d4dd7c 100644
--- a/arch/arm64/boot/dts/freescale/Makefile
+++ b/arch/arm64/boot/dts/freescale/Makefile
@@ -82,6 +82,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx8mn-venice-gw7902.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-evk.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-icore-mx8mp-edimm2.2.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-phyboard-pollux-rdk.dtb
+dtb-$(CONFIG_ARCH_MXC) += imx8mp-tqma8mpql-mba8mpxl.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-venice-gw74xx.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dahlia.dtb
dtb-$(CONFIG_ARCH_MXC) += imx8mp-verdin-nonwifi-dev.dtb
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
new file mode 100644
index 000000000000..e9755bd7619c
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql-mba8mpxl.dts
@@ -0,0 +1,689 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@xxxxxxxxxxxx>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/net/ti-dp83867.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "imx8mp-tqma8mpql.dtsi"
+
+/ {
+ model = "TQ-Systems i.MX8MPlus TQMa8MPxL on MBa8MPxL";
+ compatible = "tq,imx8mp-tqma8mpql-mba8mpxl", "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+ chosen {
+ stdout-path = &uart4;
+ };
+
+ iio-hwmon {
+ compatible = "iio-hwmon";
+ io-channels = <&adc 0>, <&adc 1>;
+ };
+
+ aliases {
+ mmc0 = &usdhc3;
+ mmc1 = &usdhc2;
+ mmc2 = &usdhc1;
+ rtc0 = &pcf85063;
+ rtc1 = &snvs_rtc;
+ spi0 = &flexspi;
+ spi1 = &ecspi1;
+ spi2 = &ecspi2;
+ spi3 = &ecspi3;
+ };
+
+ backlight_lvds: backlight-lvds {
+ compatible = "pwm-backlight";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_bllvds>;
+ pwms = <&pwm2 0 5000000 0>;
+ power-supply = <®_vcc_12v0>;
+ enable-gpios = <&gpio3 19 GPIO_ACTIVE_HIGH>;
+ status = "disabled";
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpiobutton>;
+ autorepeat;
+
+ switch1 {
+ label = "S12";
+ linux,code = <BTN_0>;
+ gpios = <&gpio5 26 GPIO_ACTIVE_LOW>;
+ };
+
+ switch2 {
+ label = "S13";
+ linux,code = <BTN_1>;
+ gpios = <&gpio5 27 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ gpio-leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpioled>;
+
+ led0 {
+ label = "led0";
+ gpios = <&gpio5 5 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "default-on";
+ };
+
+ led1 {
+ label = "led1";
+ gpios = <&gpio5 4 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "heartbeat";
+ };
+
+ led2 {
+ label = "led2";
+ gpios = <&gpio5 3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ lvds_panel: display {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_lvdspanel>;
+ enable-gpios = <&gpio3 20 GPIO_ACTIVE_HIGH>;
+ backlight = <&backlight_lvds>;
+ status = "disabled";
+ };
+
+ reg_usdhc2_vmmc: regulator-usdhc2 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg_usdhc2_vmmc>;
+ regulator-name = "VSD_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ gpio = <&gpio2 19 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ startup-delay-us = <100>;
+ off-on-delay-us = <12000>;
+ };
+
+ reg_vcc_12v0: regulator-12v0 {
+ compatible = "regulator-fixed";
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_reg12v0>;
+ regulator-name = "VCC_12V0";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ gpio = <&gpio2 6 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reg_vcc_3v3: regulator-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ ocram: ocram@900000 {
+ no-map;
+ reg = <0 0x900000 0 0x70000>;
+ };
+
+ /* global autoconfigured region for contiguous allocations */
+ linux,cma {
+ compatible = "shared-dma-pool";
+ reusable;
+ size = <0 0x38000000>;
+ alloc-ranges = <0 0x40000000 0 0xB0000000>;
+ linux,cma-default;
+ };
+ };
+};
+
+&ecspi1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi1>;
+ cs-gpios = <&gpio5 9 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ecspi2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi2>;
+ cs-gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
+ status = "okay";
+};
+
+&ecspi3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_ecspi3>;
+ cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
+ status = "okay";
+
+ adc: adc@0 {
+ reg = <0>;
+ compatible = "microchip,mcp3202";
+ /* 100 ksps * 18 */
+ spi-max-frequency = <1800000>;
+ vref-supply = <®_vcc_3v3>;
+ #io-channel-cells = <1>;
+ };
+};
+
+&eqos {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_eqos>, <&pinctrl_eqos_phy>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy3>;
+ status = "okay";
+
+ mdio {
+ compatible = "snps,dwmac-mdio";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy3: ethernet-phy@3 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <3>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ reset-gpios = <&gpio4 2 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ enet-phy-lane-no-swap;
+ interrupt-parent = <&gpio4>;
+ interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&fec {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_fec>, <&pinctrl_fec_phy>;
+ phy-mode = "rgmii-id";
+ phy-handle = <ðphy0>;
+ fsl,magic-packet;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethphy0: ethernet-phy@0 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <0>;
+ ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,tx-internal-delay = <DP83867_RGMIIDCTL_2_25_NS>;
+ ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
+ ti,dp83867-rxctrl-strap-quirk;
+ ti,clk-output-sel = <DP83867_CLK_O_SEL_OFF>;
+ reset-gpios = <&gpio4 0 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <500000>;
+ reset-deassert-us = <50000>;
+ enet-phy-lane-no-swap;
+ interrupt-parent = <&gpio4>;
+ interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
+ };
+ };
+};
+
+&flexcan1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan1>;
+ xceiver-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&flexcan2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexcan2>;
+ xceiver-supply = <®_vcc_3v3>;
+ status = "okay";
+};
+
+&gpio1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio1>;
+
+ gpio-line-names = "GPO1", "GPO0", "", "GPO3",
+ "", "", "GPO2", "GPI0",
+ "PMIC_IRQ", "GPI1", "OTG_ID", "USB_HUB_RST#",
+ "OTG_PWR", "", "GPI2", "GPI3",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_hoggpio2>;
+
+ gpio-line-names = "", "", "", "",
+ "", "", "VCC12V_EN", "PERST#",
+ "", "", "CLKREQ#", "PEWAKE#",
+ "USDHC2_CD", "", "", "",
+ "", "", "", "V_SD3V3_EN",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+
+ perst-hog {
+ gpio-hog;
+ gpios = <7 0>;
+ output-high;
+ line-name = "PERST#";
+ };
+
+ clkreq-hog {
+ gpio-hog;
+ gpios = <10 0>;
+ input;
+ line-name = "CLKREQ#";
+ };
+
+ pewake-hog {
+ gpio-hog;
+ gpios = <11 0>;
+ input;
+ line-name = "PEWAKE#";
+ };
+};
+
+&gpio3 {
+ gpio-line-names = "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "LVDS0_RESET#", "",
+ "", "", "", "LVDS0_BLT_EN",
+ "LVDS0_PWR_EN", "", "", "",
+ "", "", "", "",
+ "", "", "", "";
+};
+
+&gpio4 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_gpio4>;
+
+ gpio-line-names = "ENET0_RST#", "ENET0_INT#", "ENET1_RST#", "ENET1_INT#",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "", "DP_IRQ", "DSI_EN",
+ "HDMI_OC#", "TEMP_EVENT#", "PCIE_CLK_OE#", "",
+ "", "", "", "FAN_PWR",
+ "RTC_EVENT#", "CODEC_RST#", "", "";
+};
+
+&gpio5 {
+ gpio-line-names = "", "", "", "LED2",
+ "LED1", "LED0", "CSI0_RESET#", "CSI0_SYNC",
+ "CSI0_TRIGGER", "CSI0_ENABLE", "", "",
+ "", "ECSPI2_SS0", "", "",
+ "", "", "", "",
+ "", "", "", "",
+ "", "ECSPI3_SS0", "SWITCH_A", "SWITCH_B",
+ "", "", "", "";
+};
+
+&i2c2 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c2>;
+ pinctrl-1 = <&pinctrl_i2c2_gpio>;
+ scl-gpios = <&gpio5 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 17 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ se97_1c: temperature-sensor-eeprom@1c {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1c>;
+ };
+
+ at24c02_54: eeprom@54 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ reg = <0x54>;
+ pagesize = <16>;
+ vcc-supply = <®_vcc_3v3>;
+ };
+};
+
+&i2c4 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c4>;
+ pinctrl-1 = <&pinctrl_i2c4_gpio>;
+ scl-gpios = <&gpio5 20 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 21 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&i2c6 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c6>;
+ pinctrl-1 = <&pinctrl_i2c6_gpio>;
+ scl-gpios = <&gpio2 2 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio2 3 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+};
+
+&pcf85063 {
+ /* RTC_EVENT# is connected on MBa8MPxL */
+ interrupt-parent = <&gpio4>;
+ interrupts = <28 IRQ_TYPE_EDGE_FALLING>;
+};
+
+&pwm2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm2>;
+ status = "disabled";
+};
+
+&pwm3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pwm3>;
+ status = "okay";
+};
+
+&snvs_pwrkey {
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart1>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART1>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart2>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART2>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&uart3 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart3>;
+ assigned-clocks = <&clk IMX8MP_CLK_UART3>;
+ assigned-clock-parents = <&clk IMX8MP_SYS_PLL1_80M>;
+ status = "okay";
+};
+
+&uart4 {
+ /* console */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_uart4>;
+ status = "okay";
+};
+
+&usdhc2 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc2>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-1 = <&pinctrl_usdhc2_100mhz>, <&pinctrl_usdhc2_gpio>;
+ pinctrl-2 = <&pinctrl_usdhc2_200mhz>, <&pinctrl_usdhc2_gpio>;
+ cd-gpios = <&gpio2 12 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <®_usdhc2_vmmc>;
+ no-mmc;
+ no-sdio;
+ disable-wp;
+ bus-width = <4>;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_bllvds: bllvdsgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXFS__GPIO3_IO19 0x14>;
+ };
+
+ pinctrl_flexcan1: flexcan1grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXD1__CAN1_TX 0x150>,
+ <MX8MP_IOMUXC_SAI5_RXD2__CAN1_RX 0x150>;
+ };
+
+ pinctrl_flexcan2: flexcan2grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXD3__CAN2_TX 0x150>,
+ <MX8MP_IOMUXC_SAI5_MCLK__CAN2_RX 0x150>;
+ };
+
+ /* only on X57, primary used as CSI0 control signals */
+ pinctrl_ecspi1: ecspi1grp {
+ fsl,pins = <MX8MP_IOMUXC_ECSPI1_MISO__ECSPI1_MISO 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI1_MOSI__ECSPI1_MOSI 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI1_SCLK__ECSPI1_SCLK 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI1_SS0__GPIO5_IO09 0x1c0>;
+ };
+
+ /* on X63 and optionally on X57, can also be used as CSI1 control signals */
+ pinctrl_ecspi2: ecspi2grp {
+ fsl,pins = <MX8MP_IOMUXC_ECSPI2_MISO__ECSPI2_MISO 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI2_MOSI__ECSPI2_MOSI 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI2_SCLK__ECSPI2_SCLK 0x1c0>,
+ <MX8MP_IOMUXC_ECSPI2_SS0__GPIO5_IO13 0x1c0>;
+ };
+
+ pinctrl_ecspi3: ecspi3grp {
+ fsl,pins = <MX8MP_IOMUXC_UART1_TXD__ECSPI3_MOSI 0x1c0>,
+ <MX8MP_IOMUXC_UART1_RXD__ECSPI3_SCLK 0x1c0>,
+ <MX8MP_IOMUXC_UART2_RXD__ECSPI3_MISO 0x1c0>,
+ <MX8MP_IOMUXC_UART2_TXD__GPIO5_IO25 0x1c0>;
+ };
+
+ pinctrl_eqos: eqosgrp {
+ fsl,pins = <MX8MP_IOMUXC_ENET_MDC__ENET_QOS_MDC 0x40000044>,
+ <MX8MP_IOMUXC_ENET_MDIO__ENET_QOS_MDIO 0x40000044>,
+ <MX8MP_IOMUXC_ENET_RD0__ENET_QOS_RGMII_RD0 0x90>,
+ <MX8MP_IOMUXC_ENET_RD1__ENET_QOS_RGMII_RD1 0x90>,
+ <MX8MP_IOMUXC_ENET_RD2__ENET_QOS_RGMII_RD2 0x90>,
+ <MX8MP_IOMUXC_ENET_RD3__ENET_QOS_RGMII_RD3 0x90>,
+ <MX8MP_IOMUXC_ENET_RXC__CCM_ENET_QOS_CLOCK_GENERATE_RX_CLK 0x90>,
+ <MX8MP_IOMUXC_ENET_RX_CTL__ENET_QOS_RGMII_RX_CTL 0x90>,
+ <MX8MP_IOMUXC_ENET_TD0__ENET_QOS_RGMII_TD0 0x12>,
+ <MX8MP_IOMUXC_ENET_TD1__ENET_QOS_RGMII_TD1 0x12>,
+ <MX8MP_IOMUXC_ENET_TD2__ENET_QOS_RGMII_TD2 0x12>,
+ <MX8MP_IOMUXC_ENET_TD3__ENET_QOS_RGMII_TD3 0x12>,
+ <MX8MP_IOMUXC_ENET_TX_CTL__ENET_QOS_RGMII_TX_CTL 0x12>,
+ <MX8MP_IOMUXC_ENET_TXC__CCM_ENET_QOS_CLOCK_GENERATE_TX_CLK 0x14>;
+ };
+
+ pinctrl_eqos_event: eqosevtgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI2_RXD0__ENET_QOS_1588_EVENT2_OUT 0x100>,
+ <MX8MP_IOMUXC_SAI2_TXD0__ENET_QOS_1588_EVENT2_IN 0x1c0>;
+ };
+
+ pinctrl_eqos_phy: eqosphygrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXD0__GPIO4_IO02 0x100>,
+ <MX8MP_IOMUXC_SAI1_RXD1__GPIO4_IO03 0x1c0>;
+ };
+
+ pinctrl_fec: fecgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXD2__ENET1_MDC 0x40000044>,
+ <MX8MP_IOMUXC_SAI1_RXD3__ENET1_MDIO 0x40000044>,
+ <MX8MP_IOMUXC_SAI1_RXD4__ENET1_RGMII_RD0 0x90>,
+ <MX8MP_IOMUXC_SAI1_RXD5__ENET1_RGMII_RD1 0x90>,
+ <MX8MP_IOMUXC_SAI1_RXD6__ENET1_RGMII_RD2 0x90>,
+ <MX8MP_IOMUXC_SAI1_RXD7__ENET1_RGMII_RD3 0x90>,
+ <MX8MP_IOMUXC_SAI1_TXC__ENET1_RGMII_RXC 0x90>,
+ <MX8MP_IOMUXC_SAI1_TXFS__ENET1_RGMII_RX_CTL 0x90>,
+ <MX8MP_IOMUXC_SAI1_TXD0__ENET1_RGMII_TD0 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD1__ENET1_RGMII_TD1 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD2__ENET1_RGMII_TD2 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD3__ENET1_RGMII_TD3 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD4__ENET1_RGMII_TX_CTL 0x12>,
+ <MX8MP_IOMUXC_SAI1_TXD5__ENET1_RGMII_TXC 0x14>;
+ };
+
+ pinctrl_fec_event: fecevtgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__ENET1_1588_EVENT0_IN 0x100>,
+ <MX8MP_IOMUXC_SAI1_RXC__ENET1_1588_EVENT0_OUT 0x1c0>;
+ };
+
+ pinctrl_fec_phy: fecphygrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_RXFS__GPIO4_IO00 0x100>,
+ <MX8MP_IOMUXC_SAI1_RXC__GPIO4_IO01 0x1c0>;
+ };
+
+ pinctrl_fec_phyalt: fecphyaltgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI2_TXFS__GPIO4_IO24 0x180>,
+ <MX8MP_IOMUXC_SAI2_TXC__GPIO4_IO25 0x180>;
+ };
+
+ pinctrl_gpiobutton: gpiobuttongrp {
+ fsl,pins = <MX8MP_IOMUXC_UART3_RXD__GPIO5_IO26 0x10>,
+ <MX8MP_IOMUXC_UART3_TXD__GPIO5_IO27 0x10>;
+ };
+
+ pinctrl_gpioled: gpioledgrp {
+ fsl,pins = <MX8MP_IOMUXC_SPDIF_EXT_CLK__GPIO5_IO05 0x14>,
+ <MX8MP_IOMUXC_SPDIF_RX__GPIO5_IO04 0x14>,
+ <MX8MP_IOMUXC_SPDIF_TX__GPIO5_IO03 0x14>;
+ };
+
+ pinctrl_gpio1: gpio1grp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO00__GPIO1_IO00 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO01__GPIO1_IO01 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO03__GPIO1_IO03 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO06__GPIO1_IO06 0x10>,
+ <MX8MP_IOMUXC_GPIO1_IO07__GPIO1_IO07 0x80>,
+ <MX8MP_IOMUXC_GPIO1_IO09__GPIO1_IO09 0x80>,
+ <MX8MP_IOMUXC_GPIO1_IO14__GPIO1_IO14 0x80>,
+ <MX8MP_IOMUXC_GPIO1_IO15__GPIO1_IO15 0x80>;
+ };
+
+ pinctrl_gpio4: gpio4grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI1_MCLK__GPIO4_IO20 0x180>,
+ <MX8MP_IOMUXC_SAI2_RXC__GPIO4_IO22 0x180>;
+ };
+
+ pinctrl_hdmi: hdmigrp {
+ fsl,pins = <MX8MP_IOMUXC_HDMI_DDC_SCL__HDMIMIX_HDMI_SCL 0x400001c3>,
+ <MX8MP_IOMUXC_HDMI_DDC_SDA__HDMIMIX_HDMI_SDA 0x400001c3>,
+ <MX8MP_IOMUXC_HDMI_HPD__HDMIMIX_HDMI_HPD 0x40000019>,
+ <MX8MP_IOMUXC_HDMI_CEC__HDMIMIX_HDMI_CEC 0x40000019>;
+ };
+
+ pinctrl_hoggpio2: hoggpio2grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA5__GPIO2_IO07 0x140>,
+ <MX8MP_IOMUXC_SD1_RESET_B__GPIO2_IO10 0x140>,
+ <MX8MP_IOMUXC_SD1_STROBE__GPIO2_IO11 0x140>;
+ };
+
+ pinctrl_i2c2: i2c2grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__I2C2_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_I2C2_SDA__I2C2_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c2_gpio: i2c2-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_I2C2_SCL__GPIO5_IO16 0x400001e2>,
+ <MX8MP_IOMUXC_I2C2_SDA__GPIO5_IO17 0x400001e2>;
+ };
+
+ pinctrl_i2c4: i2c4grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__I2C4_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_I2C4_SDA__I2C4_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c4_gpio: i2c4-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_I2C4_SCL__GPIO5_IO20 0x400001e2>,
+ <MX8MP_IOMUXC_I2C4_SDA__GPIO5_IO21 0x400001e2>;
+ };
+
+ pinctrl_i2c6: i2c6grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__I2C6_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_SD1_DATA1__I2C6_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c6_gpio: i2c6-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA0__GPIO2_IO02 0x400001e2>,
+ <MX8MP_IOMUXC_SD1_DATA1__GPIO2_IO03 0x400001e2>;
+ };
+
+ pinctrl_lvdspanel: lvdspanelgrp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXC__GPIO3_IO20 0x10>; /* Power enable */
+ };
+
+ /* LVDS Backlight */
+ pinctrl_pwm2: pwm2grp {
+ fsl,pins = <MX8MP_IOMUXC_SAI5_RXD0__PWM2_OUT 0x14>;
+ };
+
+ /* FAN */
+ pinctrl_pwm3: pwm3grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C3_SDA__PWM3_OUT 0x14>;
+ };
+
+ pinctrl_reg12v0: reg12v0grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA4__GPIO2_IO06 0x140>; /* VCC12V enable */
+ };
+
+ /* X61 */
+ pinctrl_uart1: uart1grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_CLK__UART1_DCE_TX 0x140>,
+ <MX8MP_IOMUXC_SD1_CMD__UART1_DCE_RX 0x140>;
+ };
+
+ /* X61 */
+ pinctrl_uart2: uart2grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA2__UART2_DCE_TX 0x140>,
+ <MX8MP_IOMUXC_SD1_DATA3__UART2_DCE_RX 0x140>;
+ };
+
+ pinctrl_uart3: uart3grp {
+ fsl,pins = <MX8MP_IOMUXC_SD1_DATA6__UART3_DCE_TX 0x140>,
+ <MX8MP_IOMUXC_SD1_DATA7__UART3_DCE_RX 0x140>;
+ };
+
+ pinctrl_uart4: uart4grp {
+ fsl,pins = <MX8MP_IOMUXC_UART4_RXD__UART4_DCE_RX 0x140>,
+ <MX8MP_IOMUXC_UART4_TXD__UART4_DCE_TX 0x140>;
+ };
+
+ pinctrl_usdhc2: usdhc2grp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x192>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d2>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d2>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ };
+
+ pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ };
+
+ pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CLK__USDHC2_CLK 0x194>,
+ <MX8MP_IOMUXC_SD2_CMD__USDHC2_CMD 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA0__USDHC2_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA1__USDHC2_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA2__USDHC2_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_SD2_DATA3__USDHC2_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_GPIO1_IO04__USDHC2_VSELECT 0xc0>;
+ };
+
+ pinctrl_usdhc2_gpio: usdhc2-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_CD_B__GPIO2_IO12 0x1c0>;
+ };
+};
diff --git a/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
new file mode 100644
index 000000000000..7bd680a926ce
--- /dev/null
+++ b/arch/arm64/boot/dts/freescale/imx8mp-tqma8mpql.dtsi
@@ -0,0 +1,284 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/*
+ * Copyright 2021-2022 TQ-Systems GmbH
+ * Author: Alexander Stein <alexander.stein@xxxxxxxxxxxx>
+ */
+
+#include "imx8mp.dtsi"
+
+/ {
+ model = "TQ-Systems i.MX8MPlus TQMa8MPxL";
+ compatible = "tq,imx8mp-tqma8mpql", "fsl,imx8mp";
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0x0 0x40000000 0 0x80000000>;
+ };
+
+ /* identical to buck4_reg, but should never change */
+ reg_vcc3v3: regulator-vcc3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-always-on;
+ };
+
+ /* e-MMC IO, needed for HS modes */
+ reg_vcc1v8: regulator-vcc1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+};
+
+&A53_0 {
+ cpu-supply = <&buck2_reg>;
+};
+
+&flexspi {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_flexspi0>;
+ status = "okay";
+
+ flash0: flash@0 {
+ reg = <0>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ compatible = "jedec,spi-nor";
+ spi-max-frequency = <80000000>;
+ spi-tx-bus-width = <1>;
+ spi-rx-bus-width = <4>;
+ };
+};
+
+&i2c1 {
+ clock-frequency = <384000>;
+ pinctrl-names = "default", "gpio";
+ pinctrl-0 = <&pinctrl_i2c1>;
+ pinctrl-1 = <&pinctrl_i2c1_gpio>;
+ scl-gpios = <&gpio5 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ sda-gpios = <&gpio5 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
+ status = "okay";
+
+ /* NXP SE97BTP with temperature sensor + eeprom */
+ se97: temperature-sensor-eeprom@1b {
+ compatible = "nxp,se97", "jedec,jc-42.4-temp";
+ reg = <0x1b>;
+ };
+
+ pmic: pmic@25 {
+ reg = <0x25>;
+ compatible = "nxp,pca9450c";
+
+ /* PMIC PCA9450 PMIC_nINT GPIO1_IO08 */
+ pinctrl-0 = <&pinctrl_pmic>;
+ pinctrl-names = "default";
+ interrupt-parent = <&gpio1>;
+ interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
+
+ regulators {
+ /* V_0V85_SOC: 0.85 .. 0.95 */
+ buck1_reg: BUCK1 {
+ regulator-name = "BUCK1";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <950000>;
+ regulator-boot-on;
+ regulator-always-on;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* VDD_ARM */
+ buck2_reg: BUCK2 {
+ regulator-name = "BUCK2";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-boot-on;
+ regulator-always-on;
+ nxp,dvs-run-voltage = <950000>;
+ nxp,dvs-standby-voltage = <850000>;
+ regulator-ramp-delay = <3125>;
+ };
+
+ /* VCC3V3 -> VMMC, ... must not be changed */
+ buck4_reg: BUCK4 {
+ regulator-name = "BUCK4";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8 -> VQMMC, SPI-NOR, ... must not be changed */
+ buck5_reg: BUCK5 {
+ regulator-name = "BUCK5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V1 -> RAM, ... must not be changed */
+ buck6_reg: BUCK6 {
+ regulator-name = "BUCK6";
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8_SNVS */
+ ldo1_reg: LDO1 {
+ regulator-name = "LDO1";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* V_1V8_ANA */
+ ldo3_reg: LDO3 {
+ regulator-name = "LDO3";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ /* unused */
+ ldo4_reg: LDO4 {
+ regulator-name = "LDO4";
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+
+ /* VCC SD IO - switched using SD2 VSELECT */
+ ldo5_reg: LDO5 {
+ regulator-name = "LDO5";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <3300000>;
+ };
+ };
+ };
+
+ pcf85063: rtc@51 {
+ compatible = "nxp,pcf85063a";
+ reg = <0x51>;
+ };
+
+ at24c02: eeprom@53 {
+ compatible = "nxp,se97b", "atmel,24c02";
+ read-only;
+ reg = <0x53>;
+ pagesize = <16>;
+ vcc-supply = <®_vcc3v3>;
+ };
+
+ m24c64: eeprom@57 {
+ compatible = "atmel,24c64";
+ reg = <0x57>;
+ pagesize = <32>;
+ vcc-supply = <®_vcc3v3>;
+ };
+};
+
+&usdhc3 {
+ pinctrl-names = "default", "state_100mhz", "state_200mhz";
+ pinctrl-0 = <&pinctrl_usdhc3>;
+ pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
+ pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
+ bus-width = <8>;
+ non-removable;
+ no-sd;
+ no-sdio;
+ vmmc-supply = <®_vcc3v3>;
+ vqmmc-supply = <®_vcc1v8>;
+ status = "okay";
+};
+
+&wdog1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_wdog>;
+ fsl,ext-reset-output;
+ status = "okay";
+};
+
+&iomuxc {
+ pinctrl_flexspi0: flexspi0grp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_ALE__FLEXSPI_A_SCLK 0x142>,
+ <MX8MP_IOMUXC_NAND_CE0_B__FLEXSPI_A_SS0_B 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA00__FLEXSPI_A_DATA00 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA01__FLEXSPI_A_DATA01 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA02__FLEXSPI_A_DATA02 0x82>,
+ <MX8MP_IOMUXC_NAND_DATA03__FLEXSPI_A_DATA03 0x82>;
+ };
+
+ pinctrl_i2c1: i2c1grp {
+ fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__I2C1_SCL 0x400001e2>,
+ <MX8MP_IOMUXC_I2C1_SDA__I2C1_SDA 0x400001e2>;
+ };
+
+ pinctrl_i2c1_gpio: i2c1-gpiogrp {
+ fsl,pins = <MX8MP_IOMUXC_I2C1_SCL__GPIO5_IO14 0x400001e2>,
+ <MX8MP_IOMUXC_I2C1_SDA__GPIO5_IO15 0x400001e2>;
+ };
+
+ pinctrl_pmic: pmicirqgrp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO08__GPIO1_IO08 0x1c0>;
+ };
+
+ pinctrl_reg_usdhc2_vmmc: regusdhc2vmmcgrp {
+ fsl,pins = <MX8MP_IOMUXC_SD2_RESET_B__GPIO2_IO19 0x10>;
+ };
+
+ pinctrl_usdhc3: usdhc3grp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
+ <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
+ };
+
+ pinctrl_usdhc3_100mhz: usdhc3-100mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
+ <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
+ };
+
+ pinctrl_usdhc3_200mhz: usdhc3-200mhzgrp {
+ fsl,pins = <MX8MP_IOMUXC_NAND_WE_B__USDHC3_CLK 0x194>,
+ <MX8MP_IOMUXC_NAND_WP_B__USDHC3_CMD 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA04__USDHC3_DATA0 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA05__USDHC3_DATA1 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA06__USDHC3_DATA2 0x1d4>,
+ <MX8MP_IOMUXC_NAND_DATA07__USDHC3_DATA3 0x1d4>,
+ <MX8MP_IOMUXC_NAND_RE_B__USDHC3_DATA4 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE2_B__USDHC3_DATA5 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE3_B__USDHC3_DATA6 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CLE__USDHC3_DATA7 0x1d4>,
+ <MX8MP_IOMUXC_NAND_CE1_B__USDHC3_STROBE 0x84>,
+ <MX8MP_IOMUXC_NAND_READY_B__USDHC3_RESET_B 0x84>;
+ };
+
+ pinctrl_wdog: wdoggrp {
+ fsl,pins = <MX8MP_IOMUXC_GPIO1_IO02__WDOG1_WDOG_B 0x1c4>;
+ };
+};
--
2.25.1
