Hi, Bo-Chen:
On Fri, 2022-06-10 at 18:55 +0800, Bo-Chen Chen wrote:
> From: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
>
> This patch adds a embedded displayport driver for the MediaTek mt8195
> SoC.
>
> It supports the MT8195, the embedded DisplayPort units. It offers
> DisplayPort 1.4 with up to 4 lanes.
>
> The driver creates a child device for the phy. The child device will
> never exist without the parent being active. As they are sharing a
> register range, the parent passes a regmap pointer to the child so
> that
> both can work with the same register range. The phy driver sets
> device
> data that is read by the parent to get the phy device that can be
> used
> to control the phy properties.
>
> This driver is based on an initial version by
> Jitao shi <jitao.shi@xxxxxxxxxxxx>
>
> Signed-off-by: Markus Schneider-Pargmann <msp@xxxxxxxxxxxx>
> Signed-off-by: Guillaume Ranquet <granquet@xxxxxxxxxxxx>
> [Bo-Chen: Cleanup the drivers and modify comments from reviewers]
> Signed-off-by: Bo-Chen Chen <rex-bc.chen@xxxxxxxxxxxx>
> ---
[snip]
> +
> +static int mtk_dp_parse_capabilities(struct mtk_dp *mtk_dp)
> +{
> + u8 val;
> + struct mtk_dp_train_info *train_info = &mtk_dp->train_info;
> +
> + drm_dp_dpcd_writeb(&mtk_dp->aux, DP_SET_POWER,
> DP_SET_POWER_D0);
> + usleep_range(2000, 5000);
> +
> + drm_dp_read_dpcd_caps(&mtk_dp->aux, mtk_dp->rx_cap);
> +
> + mtk_dp->rx_cap[DP_TRAINING_AUX_RD_INTERVAL] &=
> DP_TRAINING_AUX_RD_MASK;
> +
> + train_info->link_rate = min_t(int, mtk_dp->max_linkrate,
> + mtk_dp->rx_cap[mtk_dp-
> >max_linkrate]);
> + train_info->lane_count = min_t(int, mtk_dp->max_lanes,
> + drm_dp_max_lane_count(mtk_dp-
> >rx_cap));
> +
> + train_info->tps3 = drm_dp_tps3_supported(mtk_dp->rx_cap);
> + train_info->tps4 = drm_dp_tps4_supported(mtk_dp->rx_cap);
> +
> + train_info->sink_ssc = !!(mtk_dp->rx_cap[DP_MAX_DOWNSPREAD] &
> + DP_MAX_DOWNSPREAD_0_5);
I think this is redundant because next statement would set sink_scc to
false.
Regards,
CK
> +
> + train_info->sink_ssc = false;
> +
> + drm_dp_dpcd_readb(&mtk_dp->aux, DP_MSTM_CAP, &val);
> + if (val & DP_MST_CAP) {
> + /* Clear DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0 */
> + drm_dp_dpcd_readb(&mtk_dp->aux,
> + DP_DEVICE_SERVICE_IRQ_VECTOR_ESI0,
> &val);
> + if (val)
> + drm_dp_dpcd_writeb(&mtk_dp->aux,
> + DP_DEVICE_SERVICE_IRQ_VECTOR
> _ESI0,
> + val);
> + }
> +
> + return 0;
> +}
