> Subject: Re: [PATCH 1/8] dt-bindings: soc: imx: add interconnect property for > i.MX8MP media blk ctrl > > Hi Peng, > > Thank you for the patch. > > On Wed, Jun 01, 2022 at 05:45:30PM +0800, Peng Fan (OSS) wrote: > > From: Peng Fan <peng.fan@xxxxxxx> > > > > Add interconnect property for i.MX8MP mediamix blk ctrl > > > > Signed-off-by: Peng Fan <peng.fan@xxxxxxx> > > --- > > .../soc/imx/fsl,imx8mp-media-blk-ctrl.yaml | 14 ++++++++++++++ > > 1 file changed, 14 insertions(+) > > > > diff --git > > a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl. > > yaml > > b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl. > > yaml index 21d3ee486295..706bef39b87e 100644 > > --- > > a/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-ctrl. > > yaml > > +++ b/Documentation/devicetree/bindings/soc/imx/fsl,imx8mp-media-blk-c > > +++ trl.yaml > > @@ -64,6 +64,20 @@ properties: > > - const: isp > > - const: phy > > > > + interconnects: > > + maxItems: 8 > > + > > + interconnect-names: > > + items: > > + - const: lcdif-rd > > + - const: lcdif-wr > > + - const: isi0 > > + - const: isi1 > > + - const: isi2 > > If I understand correctly, these are for the 1x RD and 2x WR channels of the ISI. > Would it make sense to name thim accordingly, maybe isi-rd, > isi-wr0 and isi-wr1 ? I'm not sure about the order though. >From the doc I get, they are isi0/1/2, so I would keep them as it is. Thanks, Peng. > > > + - const: isp0 > > + - const: isp1 > > + - const: dwe > > + > > required: > > - compatible > > - reg > > -- > Regards, > > Laurent Pinchart
