Due to HW limitations, MDP3 is necessary to enable MUTEX in each frame for SOF triggering and cooperate with CMDQ control to reduce the amount of interrupts generated(also, reduce frame latency). In response to the above situation, a new interface "mtk_mutex_enable_by_cmdq" has been added to achieve the purpose. Signed-off-by: Moudy Ho <moudy.ho@xxxxxxxxxxxx> Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@xxxxxxxxxxxxx> Reviewed-by: Rex-BC Chen <rex-bc.chen@xxxxxxxxxxxx> Reviewed-by: CK Hu <ck.hu@xxxxxxxxxxxx> --- drivers/soc/mediatek/mtk-mutex.c | 45 +++++++++++++++++++++++++- include/linux/soc/mediatek/mtk-mutex.h | 2 ++ 2 files changed, 46 insertions(+), 1 deletion(-) diff --git a/drivers/soc/mediatek/mtk-mutex.c b/drivers/soc/mediatek/mtk-mutex.c index f8ea09a8bb5d..85fa7df7066d 100644 --- a/drivers/soc/mediatek/mtk-mutex.c +++ b/drivers/soc/mediatek/mtk-mutex.c @@ -7,10 +7,12 @@ #include <linux/iopoll.h> #include <linux/module.h> #include <linux/of_device.h> +#include <linux/of_address.h> #include <linux/platform_device.h> #include <linux/regmap.h> #include <linux/soc/mediatek/mtk-mmsys.h> #include <linux/soc/mediatek/mtk-mutex.h> +#include <linux/soc/mediatek/mtk-cmdq.h> #define MT2701_MUTEX0_MOD0 0x2c #define MT2701_MUTEX0_SOF0 0x30 @@ -204,6 +206,8 @@ struct mtk_mutex_ctx { void __iomem *regs; struct mtk_mutex mutex[10]; const struct mtk_mutex_data *data; + phys_addr_t addr; + struct cmdq_client_reg cmdq_reg; }; static const unsigned int mt2701_mutex_mod[DDP_COMPONENT_ID_MAX] = { @@ -594,6 +598,30 @@ void mtk_mutex_enable(struct mtk_mutex *mutex) } EXPORT_SYMBOL_GPL(mtk_mutex_enable); +int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, void *pkt) +{ + struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx, + mutex[mutex->id]); +#if IS_REACHABLE(CONFIG_MTK_CMDQ) + struct cmdq_pkt *cmdq_pkt = (struct cmdq_pkt *)pkt; + + WARN_ON(&mtx->mutex[mutex->id] != mutex); + + if (!mtx->cmdq_reg.size) { + dev_err(mtx->dev, "mediatek,gce-client-reg hasn't been set"); + return -EINVAL; + } + + cmdq_pkt_write(cmdq_pkt, mtx->cmdq_reg.subsys, + mtx->addr + DISP_REG_MUTEX_EN(mutex->id), 1); + return 0; +#else + dev_err(mtx->dev, "Not support for enable MUTEX by CMDQ"); + return -ENODEV; +#endif +} +EXPORT_SYMBOL_GPL(mtk_mutex_enable_by_cmdq); + void mtk_mutex_disable(struct mtk_mutex *mutex) { struct mtk_mutex_ctx *mtx = container_of(mutex, struct mtk_mutex_ctx, @@ -684,8 +712,11 @@ static int mtk_mutex_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; struct mtk_mutex_ctx *mtx; - struct resource *regs; + struct resource *regs, addr; int i; +#if IS_REACHABLE(CONFIG_MTK_CMDQ) + int ret; +#endif mtx = devm_kzalloc(dev, sizeof(*mtx), GFP_KERNEL); if (!mtx) @@ -705,6 +736,18 @@ static int mtk_mutex_probe(struct platform_device *pdev) } } + if (of_address_to_resource(dev->of_node, 0, &addr) < 0) { + dev_err(dev, "Failed to get addr\n"); + return -EINVAL; + } + mtx->addr = addr.start; + +#if IS_REACHABLE(CONFIG_MTK_CMDQ) + ret = cmdq_dev_get_client_reg(dev, &mtx->cmdq_reg, 0); + if (ret) + dev_dbg(dev, "No mediatek,gce-client-reg!\n"); +#endif + regs = platform_get_resource(pdev, IORESOURCE_MEM, 0); mtx->regs = devm_ioremap_resource(dev, regs); if (IS_ERR(mtx->regs)) { diff --git a/include/linux/soc/mediatek/mtk-mutex.h b/include/linux/soc/mediatek/mtk-mutex.h index 2ddab9d2b85d..a0f4f51a3b45 100644 --- a/include/linux/soc/mediatek/mtk-mutex.h +++ b/include/linux/soc/mediatek/mtk-mutex.h @@ -35,6 +35,8 @@ int mtk_mutex_prepare(struct mtk_mutex *mutex); void mtk_mutex_add_comp(struct mtk_mutex *mutex, enum mtk_ddp_comp_id id); void mtk_mutex_enable(struct mtk_mutex *mutex); +int mtk_mutex_enable_by_cmdq(struct mtk_mutex *mutex, + void *pkt); void mtk_mutex_disable(struct mtk_mutex *mutex); void mtk_mutex_remove_comp(struct mtk_mutex *mutex, enum mtk_ddp_comp_id id); -- 2.18.0