The main issue this driver addresses is that a USB hub needs to be
powered before it can be discovered. For discrete onboard hubs (an
example for such a hub is the Realtek RTS5411) this is often solved
by supplying the hub with an 'always-on' regulator, which is kind
of a hack. Some onboard hubs may require further initialization
steps, like changing the state of a GPIO or enabling a clock, which
requires even more hacks. This driver creates a platform device
representing the hub which performs the necessary initialization.
Currently it only supports switching on a single regulator, support
for multiple regulators or other actions can be added as needed.
Different initialization sequences can be supported based on the
compatible string.
Besides performing the initialization the driver can be configured
to power the hub off during system suspend. This can help to extend
battery life on battery powered devices which have no requirements
to keep the hub powered during suspend. The driver can also be
configured to leave the hub powered when a wakeup capable USB device
is connected when suspending, and power it off otherwise.
Technically the driver consists of two drivers, the platform driver
described above and a very thin USB driver that subclasses the
generic driver. The purpose of this driver is to provide the platform
driver with the USB devices corresponding to the hub(s) (a hub
controller may provide multiple 'logical' hubs, e.g. one to support
USB 2.0 and another for USB 3.x).
Co-developed-by: Ravi Chandra Sadineni <ravisadineni@xxxxxxxxxxxx>
Signed-off-by: Ravi Chandra Sadineni <ravisadineni@xxxxxxxxxxxx>
Signed-off-by: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
---
Changes in v22:
- moved onboard_hub_create_pdevs(), onboard_hub_destroy_pdevs() and
of_is_onboard_usb_hub() into a separate file to allow them to be
linked into the USB core module (if CONFIG_USB=m)
- Added extra checks to ensure only one platform device is created
for each physical hub. This is necessary because
onboard_hub_create_pdevs() is now called from hub_probe() instead
of usb_add_hcd(). As a result the function is called twice for
typical USB3 hub, once for the USB3 part of the hub, and once for
USB <= 2.x. Generally the parent hub downstream of the primary HCD
creates the onboard hub platform device.
- use kzalloc() instead of devm_kzalloc() to allocate list entries. Using
managed memory can cause issues since the managed memory is allocated
before the device is probed.
- use a workqueue to (re-)attach the USB driver during/after _probe().
This is necessary to avoid self-deadlocks on systems with nested
onboard hubs.
- don't initialize list_head in onboard_hub_create_pdevs(), this needs
to be done by the owner, to ensure that onboard_hub_destroy_pdevs()
is called with a struct that was properly initialized even when
onboard_hub_create_pdevs() is not called.
- moved 'onboard_hub_match' into an include, so it can be used
by both the the onboard hub driver and of_is_onboard_usb_hub()
- removed note from the commit message which said that currently only
onboard hubs connected to a root hub are supported. This isn't the
case anymore.
- updated kernel version and date in sysfs documentation
- removed tags from Doug and Alan since this version changes quite
a few things
Changes in v21:
- refactored _find_onboard_hub()
- check presence of drvdata instead of using device_is_bound()
- return -ENODEV if the platform device can't be found
- always check drvdata, not only when looking for the companion
hub
- added comment explaining probe deferral
- removed 'onboard_hub_dev' symlinks from USB devices
- updated documentation of 'always_powered_in_suspend' sysfs attribute
Changes in v20:
- s/nontrivial/non-trivial/ in Kconfig doc
- added include of 'export.h'
- initialize variable 'power_off' in onboard_hub_suspend() at
declaration time
- renamed set_udev_link_name() to get_udev_link_name()
- use kzalloc to allocate struct usbdev_node instead of devm_kzalloc()
- release the lock in onboard_hub_add_usbdev() before calling
get_udev_link_name()
- free struct usbdev_node in onboard_hub_remove_usbdev(), now that
it doesn't used managed memory
- make struct onboard_hub const in always_powered_in_suspend_show()
- call put_device() if pdev is not bound in _find_onboard_hub()
- get driver data before calling put_device() in _find_onboard_hub()
- log platform device name when sysfs link creation fails in
onboard_hub_usbdev_probe()
- added kernel doc for onboard_hub_create_pdevs() and
onboard_hub_destroy_pdevs()
- added 'Reviewed-by' tag from Doug
Changes in v19:
- added VID:PID pairs and compatible strings for RTS5414 hub
- updated comments with RTS5411 USB versions to reflect those
reported/supported by the hub
Changes in v18:
- introduced hidden Kconfig option to align module vs. builtin
choice with CONFIG_USB (thanks Doug!)
- refactored onboard_hub_create_pdevs()
Changes in v17:
- updated date and kernel version in ABI documentation for
'always_powered_in_suspend' attribute
- removed obsolete .yaml entry from MAINTAINERS file
- added entry for ABI documentation to MAINTAINERS file
- renamed struct 'udev_node' to 'usbdev_node'
- changed return logic in onboard_hub_suspend/resume() to
get rid of 'rc' variable
- added helper set_udev_link_name() to set link names for
onboard hub USB devices
- use of_parse_phandle() instead of of_property_read_u32() +
of_find_node_by_phandle() combo
- defer probing in _find_onboard_hub() if the platform device
isn't bound yet
- initialize list head passed as parameter to
onboard_hub_create_pdevs() instead of relying on the caller
to do so
- don't require the 'companion-hub' property to be specified.
This is needed to support hubs without companion hub
- use devm_kzalloc() to allocate platform device list entries
and stop freeing them explicitly
- remove unnecessary INIT_LIST_HEAD() of platform device list
entries
- use '%pOF' to print DT node name
- delete platform device list entries from the list of devices
in onboard_hub_destroy_pdevs(). It shouldn't be strictly
necessary, but better be on the safe side.
Changes in v16:
- none
Changes in v15:
- none
Changes in v14:
- none
Changes in v13:
- none
Changes in v12:
- use IS_ENABLED(CONFIG_USB_ONBOARD_HUB_MODULE) in onboard_hub.h to
also check for the driver built as module
- include onboard_hub.h again from the driver to make sure there are
prototype declarations for the public functions
- remove indentation from label in onboard_hub_create_pdevs()
Changes in v11:
- added onboard_hub_create/destroy_pdevs() helpers, to support multiple onboard
hubs connected to the same parent hub
- don't include ‘onboard_hub.h’ from the onboard hub driver
- updated commit message
- added ‘Acked-by' from Alan
Changes in v10:
- always use of_is_onboard_usb_hub() stub unless ONBOARD_USB_HUB=y/m
Changes in v9:
- none
Changes in v8:
- none
Changes in v7:
- don't declare stub for of_is_onboard_usb_hub() when
CONFIG_COMPILE_TEST is defined
Changes in v6:
- use 'companion-hub' to locate the platform device, instead of
scanning through the nodes of the parent
- added ABI documentation for 'always_powered_in_suspend'
- sysfs_emit() instead of sprintf() in always_powered_in_suspend_show()
- register sysfs attribute through driver.dev_groups
- evaluate return value of driver_attach() in _probe()
- use dev_warn() instead of WARN_ON() in _probe()
- include 'onboard_hub.h'
Changes in v5:
- the platform device is now instantiated from the same DT node
as the 'primary' USB hub device
- use the USB compatible strings for the platform device
- refactored _find_onboard_hub() to search the parents child
nodes for a platform device with a matching compatible string
- added exported function of_is_onboard_usb_hub() to allow other
drivers (like xhci_plat) to check if one of their child DT nodes
is a supported hub
- use late suspend to make sure info about wakeup enabled descendants
is updated
- call driver_attach() for the USB driver in onboard_hub_probe() to
make sure the driver is re-attached after the device_release_driver()
calls in onboard_hub_remove()
- renamed sysfs attribute 'power_off_in_suspend' to
'always_powered_in_suspend'
- added sysfs symlinks between platform device and USB devices
- marked 'onboard_hub_pm_ops' as __maybe_unused
- removed 'realtek' compatible string which is not needed at this
point
- fix log for regulator_disable() failure
Changes in v4:
- updated Kconfig documentation
- changed the loop in onboard_hub_remove() to release the hub lock
before unbinding the USB device and make self deadlock prevention
less clunky
- fixed return value in onboard_hub_usbdev_probe()
- added entry to MAINTAINERS file
Changes in v3:
- updated the commit message
- updated description in Kconfig
- remove include of 'core/usb.h'
- use 'is_powered_on' flag instead of 'has_wakeup_capable_descendants'
- added 'going_away' flag to struct onboard_hub
- don't allow adding new USB devices when the platform device is going away
- don't bother with deleting the list item in onboard_hub_remove_usbdev()
when the platform device is going away
- don't assume in onboard_hub_suspend() that all USB hub devices are
connected to the same controller
- removed unnecessary devm_kfree() from onboard_hub_remove_usbdev()
- fixed error handling in onboard_hub_remove_usbdev()
- use kstrtobool() instead of strtobool() in power_off_in_suspend_store()
- unbind USB devices in onboard_hub_remove() to avoid dangling references
to the platform device
- moved put_device() for platform device to _find_onboard_hub()
- changed return value of onboard_hub_remove_usbdev() to void
- evaluate return value of onboard_hub_add_usbdev()
- register 'power_off_in_suspend' as managed device attribute
- use USB_DEVICE macro instead manual initialization
- add unwinding to onboard_hub_init()
- updated MODULE_DESCRIPTION
- use module_init() instead of device_initcall()
Changes in v2:
- check wakeup enabled state of the USB controller instead of
using 'wakeup-source' property
- use sysfs attribute instead of DT property to determine if
the hub should be powered off at all during system suspend
- added missing brace in onboard_hub_suspend()
- updated commit message
- use pm_ptr for pm_ops as suggested by Alan
Changes in v1:
- renamed the driver to 'onboard_usb_hub'
- single file for platform and USB driver
- USB hub devices register with the platform device
- the DT includes a phandle of the platform device
- the platform device now controls when power is turned off
- the USB driver became a very thin subclass of the generic USB
driver
- enabled autosuspend support
.../sysfs-bus-platform-onboard-usb-hub | 8 +
MAINTAINERS | 7 +
drivers/usb/core/Makefile | 1 +
drivers/usb/misc/Kconfig | 23 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/onboard_usb_hub.c | 426 ++++++++++++++++++
drivers/usb/misc/onboard_usb_hub.h | 17 +
drivers/usb/misc/onboard_usb_hub_pdevs.c | 129 ++++++
include/linux/usb/onboard_hub.h | 18 +
9 files changed, 630 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
create mode 100644 drivers/usb/misc/onboard_usb_hub.c
create mode 100644 drivers/usb/misc/onboard_usb_hub.h
create mode 100644 drivers/usb/misc/onboard_usb_hub_pdevs.c
create mode 100644 include/linux/usb/onboard_hub.h
diff --git a/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
new file mode 100644
index 000000000000..42deb0552065
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
@@ -0,0 +1,8 @@
+What: /sys/bus/platform/devices/<dev>/always_powered_in_suspend
+Date: June 2022
+KernelVersion: 5.20
+Contact: Matthias Kaehlcke <matthias@xxxxxxxxxxxx>
+ linux-usb@xxxxxxxxxxxxxxx
+Description:
+ (RW) Controls whether the USB hub remains always powered
+ during system suspend or not.
\ No newline at end of file
diff --git a/MAINTAINERS b/MAINTAINERS
index a6d3bd9d2a8d..caeef7e111c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -14784,6 +14784,13 @@ S: Maintained
T: git git://linuxtv.org/media_tree.git
F: drivers/media/i2c/ov9734.c
+ONBOARD USB HUB DRIVER
+M: Matthias Kaehlcke <mka@xxxxxxxxxxxx>
+L: linux-usb@xxxxxxxxxxxxxxx
+S: Maintained
+F: Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub
+F: drivers/usb/misc/onboard_usb_hub.c
+
ONENAND FLASH DRIVER
M: Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
L: linux-mtd@xxxxxxxxxxxxxxxxxxx
diff --git a/drivers/usb/core/Makefile b/drivers/usb/core/Makefile
index 18e874b0441e..0ce219f5a343 100644
--- a/drivers/usb/core/Makefile
+++ b/drivers/usb/core/Makefile
@@ -11,6 +11,7 @@ usbcore-y += phy.o port.o
usbcore-$(CONFIG_OF) += of.o
usbcore-$(CONFIG_USB_PCI) += hcd-pci.o
usbcore-$(CONFIG_ACPI) += usb-acpi.o
+usbcore-$(CONFIG_USB_ONBOARD_HUB) += ../misc/onboard_usb_hub_pdevs.o
obj-$(CONFIG_USB) += usbcore.o
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 4c5ddbd75b7e..993d07d2ffe5 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -295,3 +295,26 @@ config BRCM_USB_PINMAP
This option enables support for remapping some USB external
signals, which are typically on dedicated pins on the chip,
to any gpio.
+
+config USB_ONBOARD_HUB
+ bool "Onboard USB hub support"
+ depends on OF || COMPILE_TEST
+ help
+ Say Y here if you want to support discrete onboard USB hubs that
+ don't require an additional control bus for initialization, but
+ need some non-trivial form of initialization, such as enabling a
+ power regulator. An example for such a hub is the Realtek
+ RTS5411.
+
+ This driver can be used as a module but its state (module vs
+ builtin) must match the state of the USB subsystem. Enabling
+ this config will enable the driver and it will automatically
+ match the state of the USB subsystem. If this driver is a
+ module it will be called onboard_usb_hub.
+
+if USB_ONBOARD_HUB
+config USB_ONBOARD_HUB_ACTUAL
+ tristate
+ default m if USB=m
+ default y if USB=y
+endif
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 35bdb4b6c3b6..ea65e202a055 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -33,3 +33,4 @@ obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o
obj-$(CONFIG_USB_SISUSBVGA) += sisusbvga/
obj-$(CONFIG_USB_LINK_LAYER_TEST) += lvstest.o
obj-$(CONFIG_BRCM_USB_PINMAP) += brcmstb-usb-pinmap.o
+obj-$(CONFIG_USB_ONBOARD_HUB_ACTUAL) += onboard_usb_hub.o
diff --git a/drivers/usb/misc/onboard_usb_hub.c b/drivers/usb/misc/onboard_usb_hub.c
new file mode 100644
index 000000000000..21655b9ff559
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub.c
@@ -0,0 +1,426 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Driver for onboard USB hubs
+ *
+ * Copyright (c) 2022, Google LLC
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+#include <linux/suspend.h>
+#include <linux/sysfs.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/onboard_hub.h>
+#include <linux/workqueue.h>
+
+#include "onboard_usb_hub.h"
+
+static struct usb_device_driver onboard_hub_usbdev_driver;
+
+/************************** Platform driver **************************/
+
+struct usbdev_node {
+ struct usb_device *udev;
+ struct list_head list;
+};
+
+struct onboard_hub {
+ struct regulator *vdd;
+ struct device *dev;
+ bool always_powered_in_suspend;
+ bool is_powered_on;
+ bool going_away;
+ struct list_head udev_list;
+ struct work_struct attach_usb_driver_work;
+ struct mutex lock;
+};
+
+static int onboard_hub_power_on(struct onboard_hub *hub)
+{
+ int err;
+
+ err = regulator_enable(hub->vdd);
+ if (err) {
+ dev_err(hub->dev, "failed to enable regulator: %d\n", err);
+ return err;
+ }
+
+ hub->is_powered_on = true;
+
+ return 0;
+}
+
+static int onboard_hub_power_off(struct onboard_hub *hub)
+{
+ int err;
+
+ err = regulator_disable(hub->vdd);
+ if (err) {
+ dev_err(hub->dev, "failed to disable regulator: %d\n", err);
+ return err;
+ }
+
+ hub->is_powered_on = false;
+
+ return 0;
+}
+
+static int __maybe_unused onboard_hub_suspend(struct device *dev)
+{
+ struct onboard_hub *hub = dev_get_drvdata(dev);
+ struct usbdev_node *node;
+ bool power_off = true;
+
+ if (hub->always_powered_in_suspend)
+ return 0;
+
+ mutex_lock(&hub->lock);
+
+ list_for_each_entry(node, &hub->udev_list, list) {
+ if (!device_may_wakeup(node->udev->bus->controller))
+ continue;
+
+ if (usb_wakeup_enabled_descendants(node->udev)) {
+ power_off = false;
+ break;
+ }
+ }
+
+ mutex_unlock(&hub->lock);
+
+ if (!power_off)
+ return 0;
+
+ return onboard_hub_power_off(hub);
+}
+
+static int __maybe_unused onboard_hub_resume(struct device *dev)
+{
+ struct onboard_hub *hub = dev_get_drvdata(dev);
+
+ if (hub->is_powered_on)
+ return 0;
+
+ return onboard_hub_power_on(hub);
+}
+
+static inline void get_udev_link_name(const struct usb_device *udev, char *buf, size_t size)
+{
+ snprintf(buf, size, "usb_dev.%s", dev_name(&udev->dev));
+}
+
+static int onboard_hub_add_usbdev(struct onboard_hub *hub, struct usb_device *udev)
+{
+ struct usbdev_node *node;
+ char link_name[64];
+ int err;
+
+ mutex_lock(&hub->lock);
+
+ if (hub->going_away) {
+ err = -EINVAL;
+ goto error;
+ }
+
+ node = kzalloc(sizeof(*node), GFP_KERNEL);
+ if (!node) {
+ err = -ENOMEM;
+ goto error;
+ }
+
+ node->udev = udev;
+
+ list_add(&node->list, &hub->udev_list);
+
+ mutex_unlock(&hub->lock);
+
+ get_udev_link_name(udev, link_name, sizeof(link_name));
+ WARN_ON(sysfs_create_link(&hub->dev->kobj, &udev->dev.kobj, link_name));
+
+ return 0;
+
+error:
+ mutex_unlock(&hub->lock);
+
+ return err;
+}
+
+static void onboard_hub_remove_usbdev(struct onboard_hub *hub, const struct usb_device *udev)
+{
+ struct usbdev_node *node;
+ char link_name[64];
+
+ get_udev_link_name(udev, link_name, sizeof(link_name));
+ sysfs_remove_link(&hub->dev->kobj, link_name);
+
+ mutex_lock(&hub->lock);
+
+ list_for_each_entry(node, &hub->udev_list, list) {
+ if (node->udev == udev) {
+ list_del(&node->list);
+ kfree(node);
+ break;
+ }
+ }
+
+ mutex_unlock(&hub->lock);
+}
+
+static ssize_t always_powered_in_suspend_show(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ const struct onboard_hub *hub = dev_get_drvdata(dev);
+
+ return sysfs_emit(buf, "%d\n", hub->always_powered_in_suspend);
+}
+
+static ssize_t always_powered_in_suspend_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct onboard_hub *hub = dev_get_drvdata(dev);
+ bool val;
+ int ret;
+
+ ret = kstrtobool(buf, &val);
+ if (ret < 0)
+ return ret;
+
+ hub->always_powered_in_suspend = val;
+
+ return count;
+}
+static DEVICE_ATTR_RW(always_powered_in_suspend);
+
+static struct attribute *onboard_hub_attrs[] = {
+ &dev_attr_always_powered_in_suspend.attr,
+ NULL,
+};
+ATTRIBUTE_GROUPS(onboard_hub);
+
+static void onboard_hub_attach_usb_driver(struct work_struct *work)
+{
+ int err;
+
+ err = driver_attach(&onboard_hub_usbdev_driver.drvwrap.driver);
+ if (err)
+ pr_err("Failed to attach USB driver: %d\n", err);
+}
+
+static int onboard_hub_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct onboard_hub *hub;
+ int err;
+
+ hub = devm_kzalloc(dev, sizeof(*hub), GFP_KERNEL);
+ if (!hub)
+ return -ENOMEM;
+
+ hub->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(hub->vdd))
+ return PTR_ERR(hub->vdd);
+
+ hub->dev = dev;
+ mutex_init(&hub->lock);
+ INIT_LIST_HEAD(&hub->udev_list);
+
+ dev_set_drvdata(dev, hub);
+
+ err = onboard_hub_power_on(hub);
+ if (err)
+ return err;
+
+ /*
+ * The USB driver might have been detached from the USB devices by
+ * onboard_hub_remove(), make sure to re-attach it if needed.
+ *
+ * This needs to be done deferred to avoid self-deadlocks on systems
+ * with nested onboard hubs.
+ */
+ INIT_WORK(&hub->attach_usb_driver_work, onboard_hub_attach_usb_driver);
+ schedule_work(&hub->attach_usb_driver_work);
+
+ return 0;
+}
+
+static int onboard_hub_remove(struct platform_device *pdev)
+{
+ struct onboard_hub *hub = dev_get_drvdata(&pdev->dev);
+ struct usbdev_node *node;
+ struct usb_device *udev;
+
+ hub->going_away = true;
+
+ cancel_work_sync(&hub->attach_usb_driver_work);
+
+ mutex_lock(&hub->lock);
+
+ /* unbind the USB devices to avoid dangling references to this device */
+ while (!list_empty(&hub->udev_list)) {
+ node = list_first_entry(&hub->udev_list, struct usbdev_node, list);
+ udev = node->udev;
+
+ /*
+ * Unbinding the driver will call onboard_hub_remove_usbdev(),
+ * which acquires hub->lock. We must release the lock first.
+ */
+ get_device(&udev->dev);
+ mutex_unlock(&hub->lock);
+ device_release_driver(&udev->dev);
+ put_device(&udev->dev);
+ mutex_lock(&hub->lock);
+ }
+
+ mutex_unlock(&hub->lock);
+
+ return onboard_hub_power_off(hub);
+}
+
+MODULE_DEVICE_TABLE(of, onboard_hub_match);
+
+static const struct dev_pm_ops __maybe_unused onboard_hub_pm_ops = {
+ SET_LATE_SYSTEM_SLEEP_PM_OPS(onboard_hub_suspend, onboard_hub_resume)
+};
+
+static struct platform_driver onboard_hub_driver = {
+ .probe = onboard_hub_probe,
+ .remove = onboard_hub_remove,
+
+ .driver = {
+ .name = "onboard-usb-hub",
+ .of_match_table = onboard_hub_match,
+ .pm = pm_ptr(&onboard_hub_pm_ops),
+ .dev_groups = onboard_hub_groups,
+ },
+};
+
+/************************** USB driver **************************/
+
+#define VENDOR_ID_REALTEK 0x0bda
+
+/*
+ * Returns the onboard_hub platform device that is associated with the USB
+ * device passed as parameter.
+ */
+static struct onboard_hub *_find_onboard_hub(struct device *dev)
+{
+ struct platform_device *pdev;
+ struct device_node *np;
+ struct onboard_hub *hub;
+
+ pdev = of_find_device_by_node(dev->of_node);
+ if (!pdev) {
+ np = of_parse_phandle(dev->of_node, "companion-hub", 0);
+ if (!np) {
+ dev_err(dev, "failed to find device node for companion hub\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ pdev = of_find_device_by_node(np);
+ of_node_put(np);
+
+ if (!pdev)
+ return ERR_PTR(-ENODEV);
+ }
+
+ hub = dev_get_drvdata(&pdev->dev);
+ put_device(&pdev->dev);
+
+ /*
+ * The presence of drvdata ('hub') indicates that the platform driver
+ * finished probing. This handles the case where (conceivably) we could
+ * be running at the exact same time as the platform driver's probe. If
+ * we detect the race we request probe deferral and we'll come back and
+ * try again.
+ */
+ if (!hub)
+ return ERR_PTR(-EPROBE_DEFER);
+
+ return hub;
+}
+
+static int onboard_hub_usbdev_probe(struct usb_device *udev)
+{
+ struct device *dev = &udev->dev;
+ struct onboard_hub *hub;
+ int err;
+
+ /* ignore supported hubs without device tree node */
+ if (!dev->of_node)
+ return -ENODEV;
+
+ hub = _find_onboard_hub(dev);
+ if (IS_ERR(hub))
+ return PTR_ERR(hub);
+
+ dev_set_drvdata(dev, hub);
+
+ err = onboard_hub_add_usbdev(hub, udev);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+static void onboard_hub_usbdev_disconnect(struct usb_device *udev)
+{
+ struct onboard_hub *hub = dev_get_drvdata(&udev->dev);
+
+ onboard_hub_remove_usbdev(hub, udev);
+}
+
+static const struct usb_device_id onboard_hub_id_table[] = {
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0411) }, /* RTS5411 USB 3.1 */
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5411) }, /* RTS5411 USB 2.1 */
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x0414) }, /* RTS5414 USB 3.2 */
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x5414) }, /* RTS5414 USB 2.1 */
+ {}
+};
+MODULE_DEVICE_TABLE(usb, onboard_hub_id_table);
+
+static struct usb_device_driver onboard_hub_usbdev_driver = {
+ .name = "onboard-usb-hub",
+ .probe = onboard_hub_usbdev_probe,
+ .disconnect = onboard_hub_usbdev_disconnect,
+ .generic_subclass = 1,
+ .supports_autosuspend = 1,
+ .id_table = onboard_hub_id_table,
+};
+
+static int __init onboard_hub_init(void)
+{
+ int ret;
+
+ ret = platform_driver_register(&onboard_hub_driver);
+ if (ret)
+ return ret;
+
+ ret = usb_register_device_driver(&onboard_hub_usbdev_driver, THIS_MODULE);
+ if (ret)
+ platform_driver_unregister(&onboard_hub_driver);
+
+ return ret;
+}
+module_init(onboard_hub_init);
+
+static void __exit onboard_hub_exit(void)
+{
+ usb_deregister_device_driver(&onboard_hub_usbdev_driver);
+ platform_driver_unregister(&onboard_hub_driver);
+}
+module_exit(onboard_hub_exit);
+
+MODULE_AUTHOR("Matthias Kaehlcke <mka@xxxxxxxxxxxx>");
+MODULE_DESCRIPTION("Driver for discrete onboard USB hubs");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/usb/misc/onboard_usb_hub.h b/drivers/usb/misc/onboard_usb_hub.h
new file mode 100644
index 000000000000..d3a5b6938582
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub.h
@@ -0,0 +1,17 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+/*
+ * Copyright (c) 2022, Google LLC
+ */
+
+#ifndef _USB_MISC_ONBOARD_USB_HUB_H
+#define _USB_MISC_ONBOARD_USB_HUB_H
+
+static const struct of_device_id onboard_hub_match[] = {
+ { .compatible = "usbbda,411" },
+ { .compatible = "usbbda,5411" },
+ { .compatible = "usbbda,414" },
+ { .compatible = "usbbda,5414" },
+ {}
+};
+
+#endif /* _USB_MISC_ONBOARD_USB_HUB_H */
diff --git a/drivers/usb/misc/onboard_usb_hub_pdevs.c b/drivers/usb/misc/onboard_usb_hub_pdevs.c
new file mode 100644
index 000000000000..8f38cca9e530
--- /dev/null
+++ b/drivers/usb/misc/onboard_usb_hub_pdevs.c
@@ -0,0 +1,129 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * API for creating and destroying USB onboard hub platform devices
+ *
+ * Copyright (c) 2022, Google LLC
+ */
+
+#include <linux/device.h>
+#include <linux/export.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/usb.h>
+#include <linux/usb/hcd.h>
+#include <linux/usb/of.h>
+
+#include "onboard_usb_hub.h"
+
+struct pdev_list_entry {
+ struct platform_device *pdev;
+ struct list_head node;
+};
+
+static bool of_is_onboard_usb_hub(const struct device_node *np)
+{
+ return !!of_match_node(onboard_hub_match, np);
+}
+
+/**
+ * onboard_hub_create_pdevs -- create platform devices for onboard USB hubs
+ * @parent_hub : parent hub to scan for connected onboard hubs
+ * @pdev_list : list of onboard hub platform devices owned by the parent hub
+ *
+ * Creates a platform device for each supported onboard hub that is connected to
+ * the given parent hub. To keep track of the platform devices they are added to
+ * a list that is owned by the parent hub.
+ */
+void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list)
+{
+ int i;
+ struct usb_hcd *hcd = bus_to_hcd(parent_hub->bus);
+ struct device_node *np, *npc;
+ struct platform_device *pdev = NULL;
+ struct pdev_list_entry *pdle;
+
+ if (!parent_hub->dev.of_node)
+ return;
+
+ for (i = 1; i <= parent_hub->maxchild; i++) {
+ np = usb_of_get_device_node(parent_hub, i);
+ if (!np)
+ continue;
+
+ if (!of_is_onboard_usb_hub(np))
+ goto node_put;
+
+ npc = of_parse_phandle(np, "companion-hub", 0);
+ if (npc) {
+ /*
+ * Hubs with companions share the same platform device.
+ * Create the plaform device only for the hub that is
+ * connected to the primary HCD (directly or through
+ * other hubs).
+ */
+ if (!usb_hcd_is_primary_hcd(hcd)) {
+ of_node_put(npc);
+ goto node_put;
+ }
+
+ pdev = of_find_device_by_node(npc);
+ of_node_put(npc);
+ } else {
+ /*
+ * For root hubs this function can be called multiple times
+ * for the same root hub node (the HCD node). Make sure only
+ * one platform device is created for this hub.
+ */
+ if (!parent_hub->parent && !usb_hcd_is_primary_hcd(hcd))
+ goto node_put;
+ }
+
+ if (pdev) {
+ /* the companion hub already has a platform device, nothing to do here */
+ put_device(&pdev->dev);
+ goto node_put;
+ }
+
+ pdev = of_platform_device_create(np, NULL, &parent_hub->dev);
+ if (!pdev) {
+ dev_err(&parent_hub->dev,
+ "failed to create platform device for onboard hub '%pOF'\n", np);
+ goto node_put;
+ }
+
+ pdle = kzalloc(sizeof(*pdle), GFP_KERNEL);
+ if (!pdle) {
+ of_platform_device_destroy(&pdev->dev, NULL);
+ goto node_put;
+ }
+
+ pdle->pdev = pdev;
+ list_add(&pdle->node, pdev_list);
+
+node_put:
+ of_node_put(np);
+ }
+}
+EXPORT_SYMBOL_GPL(onboard_hub_create_pdevs);
+
+/**
+ * onboard_hub_destroy_pdevs -- free resources of onboard hub platform devices
+ * @pdev_list : list of onboard hub platform devices
+ *
+ * Destroys the platform devices in the given list and frees the memory associated
+ * with the list entry.
+ */
+void onboard_hub_destroy_pdevs(struct list_head *pdev_list)
+{
+ struct pdev_list_entry *pdle, *tmp;
+
+ list_for_each_entry_safe(pdle, tmp, pdev_list, node) {
+ list_del(&pdle->node);
+ of_platform_device_destroy(&pdle->pdev->dev, NULL);
+ kfree(pdle);
+ }
+}
+EXPORT_SYMBOL_GPL(onboard_hub_destroy_pdevs);
diff --git a/include/linux/usb/onboard_hub.h b/include/linux/usb/onboard_hub.h
new file mode 100644
index 000000000000..d9373230556e
--- /dev/null
+++ b/include/linux/usb/onboard_hub.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+
+#ifndef __LINUX_USB_ONBOARD_HUB_H
+#define __LINUX_USB_ONBOARD_HUB_H
+
+struct usb_device;
+struct list_head;
+
+#if IS_ENABLED(CONFIG_USB_ONBOARD_HUB)
+void onboard_hub_create_pdevs(struct usb_device *parent_hub, struct list_head *pdev_list);
+void onboard_hub_destroy_pdevs(struct list_head *pdev_list);
+#else
+static inline void onboard_hub_create_pdevs(struct usb_device *parent_hub,
+ struct list_head *pdev_list) {}
+static inline void onboard_hub_destroy_pdevs(struct list_head *pdev_list) {}
+#endif
+
+#endif /* __LINUX_USB_ONBOARD_HUB_H */
--
2.36.1.476.g0c4daa206d-goog
