The node names should be generic and DT schema expects certain pattern
(e.g. with key/button/switch).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +-
arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
index caf9c8529fca..6721b9b4cf5c 100644
--- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
+++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts
@@ -45,7 +45,7 @@ red {
gpio-keys {
compatible = "gpio-keys";
- reset {
+ key-reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpiosb 20 GPIO_ACTIVE_LOW>;
diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
index 871f84b4a6ed..15f6ca4df121 100644
--- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
+++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
@@ -94,7 +94,7 @@ keys {
pinctrl-0 = <&cp0_gpio_reset_pins &cp1_wps_button_pins>;
pinctrl-names = "default";
- button_0 {
+ button-0 {
/* The rear button */
label = "Rear Button";
gpios = <&cp0_gpio2 7 GPIO_ACTIVE_LOW>;
@@ -102,7 +102,7 @@ button_0 {
linux,code = <BTN_0>;
};
- button_1 {
+ button-1 {
/* The wps button */
label = "WPS Button";
gpios = <&cp1_gpio1 30 GPIO_ACTIVE_LOW>;
--
2.34.1
