Hi Shawn, > Subject: [PATCH V6 0/4] arm64: add i.MX93 support Is there a chance to get this patchset into your tree? Thanks, Peng. > > From: Peng Fan <peng.fan@xxxxxxx> > > Sorry for sending several versions in short time, just wanna to catch 5.19 > > V6: > Per Fabio's comments, drop unused uart2/uart5 pinmux > > V5: > Add R-b from Aisheng > drop iomuxc status from board dts > > V4: > Add A-b > In patch 1 to move imx93 behind imx8ulp Drop a whitespace in patch 2 > > V3: > Add a new patch patch 1 for board binding doc Add A-b from Rob Fix dtb > warnings. > > V2: > Update License > > Add i.MX93 dtsi and 11x11 evk board support > > The required bindings and drivers has already been in tree. > There arem checkpatch error for the pin header files as other i.MX pin pin > header files. > > > Peng Fan (4): > dt-bindings: arm: fsl: add imx93 11x11 evk board > arm64: dts: freescale: Add i.MX93 dtsi support > arm64: dts: freescale: add i.MX93 11x11 EVK basic support > arm64: defconfig: enable i.MX93 clk & pinctrl > > .../devicetree/bindings/arm/fsl.yaml | 6 + > arch/arm64/boot/dts/freescale/Makefile | 1 + > .../boot/dts/freescale/imx93-11x11-evk.dts | 114 ++++ > arch/arm64/boot/dts/freescale/imx93-pinfunc.h | 623 > ++++++++++++++++++ > arch/arm64/boot/dts/freescale/imx93.dtsi | 334 ++++++++++ > arch/arm64/configs/defconfig | 2 + > 6 files changed, 1080 insertions(+) > create mode 100644 arch/arm64/boot/dts/freescale/imx93-11x11-evk.dts > create mode 100755 arch/arm64/boot/dts/freescale/imx93-pinfunc.h > create mode 100644 arch/arm64/boot/dts/freescale/imx93.dtsi > > -- > 2.25.1
