As agreed with David, this is a continuation of his work started at [1]. I didn't pick up his R-b tag for the first patch, since patch has been heavily modified. Changes since v1: - Dropped quotes in $id/$schema - Sorted out compat strings alphabetically - Removed obvious descriptions - Removed undocumented qcom,hdmi-tx-ddc-* properties - Switched to additionalProperties - Fixed IRQ and GPIO flags in the schema example - Added 8084 and 8660 variants to qcom,hdmi-phy-other.yaml conditional - Marked hdmi-mux-supply as deprecated (and dropped it from apq8064-ifc6410.dtsi) - Reused 8960 regulator/clock configs for 8x60 (verified against msm-3.4 kernel) Changes since his patches: HDMI schema: - Dropped generic pinctrl properties - Dropped data-lanes property, which is not supported by the HDMI driver - Switched to unevaluatedProperties - Moved clocks/regulators/supplies to condition clauses - Specified phy-names as used by existing DT files - Dropped #phy-cells - Dropped power-domains property (which is not used by the device trees) - Marked old GPIO properties as deprecated (in a separate patch) HDMI PHY schema: - Split into QMP (msm8996) and non-QMP (other) PHY schemas - Added proper clocks/clock-names/reg/reg-names descriptions The rest of the patches consist of the new work. They further cleanup the platform configs, remove unused supplies, etc. [1]: https://patchwork.freedesktop.org/series/98353/ Dmitry Baryshkov (12): dt-bindings: display/msm: hdmi: split and convert to yaml dt-bindings: display/msm: hdmi: mark old GPIO properties as deprecated dt-bindings: display/msm: hdmi: mark hdmi-mux-supply as deprecated arm: dts: qcom: apq8064-ifc6410: drop hdmi-mux-supply drm/msm/hdmi: drop the hdmi-mux support drm/msm/hdmi: drop unused GPIO support drm/msm/hdmi: enable core-vcc/core-vdda-supply for 8996 platform drm/msm/hdmi: drop empty 'none' regulator lists drm/msm/hdmi: drop hpd_regs usage on 8x74/8084 drm/msm/hdmi: merge platform config for 8974/8084/8994/8996 drm/msm/hdmi: reuse MSM8960's config for MSM8660 drm/msm/hdmi-phy: populate 8x60 HDMI PHY requirements .../devicetree/bindings/display/msm/hdmi.txt | 99 -------- .../devicetree/bindings/display/msm/hdmi.yaml | 234 ++++++++++++++++++ .../bindings/phy/qcom,hdmi-phy-other.yaml | 103 ++++++++ .../bindings/phy/qcom,hdmi-phy-qmp.yaml | 83 +++++++ arch/arm/boot/dts/qcom-apq8064-ifc6410.dts | 1 - drivers/gpu/drm/msm/hdmi/hdmi.c | 104 ++------ drivers/gpu/drm/msm/hdmi/hdmi.h | 13 +- drivers/gpu/drm/msm/hdmi/hdmi_hpd.c | 62 +---- drivers/gpu/drm/msm/hdmi/hdmi_phy_8x60.c | 12 + 9 files changed, 454 insertions(+), 257 deletions(-) delete mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.txt create mode 100644 Documentation/devicetree/bindings/display/msm/hdmi.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-other.yaml create mode 100644 Documentation/devicetree/bindings/phy/qcom,hdmi-phy-qmp.yaml -- 2.35.1
