[PATCH 1/2] dt-bindings: thermal: qcom,spmi-temp-alarm: convert to dtschema

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Convert the Qualcomm QPNP PMIC Temperature Alarm to DT Schema.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
---
 .../thermal/qcom,spmi-temp-alarm.yaml         | 85 +++++++++++++++++++
 .../bindings/thermal/qcom-spmi-temp-alarm.txt | 51 -----------
 2 files changed, 85 insertions(+), 51 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
 delete mode 100644 Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt

diff --git a/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
new file mode 100644
index 000000000000..5f08b6e59b8a
--- /dev/null
+++ b/Documentation/devicetree/bindings/thermal/qcom,spmi-temp-alarm.yaml
@@ -0,0 +1,85 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/thermal/qcom,spmi-temp-alarm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QPNP PMIC Temperature Alarm
+
+maintainers:
+  - Bjorn Andersson <bjorn.andersson@xxxxxxxxxx>
+
+description:
+  QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
+  that utilize the Qualcomm SPMI implementation. These peripherals provide an
+  interrupt signal and status register to identify high PMIC die temperature.
+
+allOf:
+  - $ref: thermal-sensor.yaml#
+
+properties:
+  compatible:
+    const: qcom,spmi-temp-alarm
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  io-channels:
+    items:
+      - description: ADC channel, which reports chip die temperature
+
+  io-channel-names:
+    items:
+      - const: thermal
+
+  '#thermal-sensor-cells':
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - '#thermal-sensor-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+    pmic {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        pm8350_temp_alarm: temperature-sensor@a00 {
+            compatible = "qcom,spmi-temp-alarm";
+            reg = <0xa00>;
+            interrupts = <0x1 0xa 0x0 IRQ_TYPE_EDGE_BOTH>;
+            #thermal-sensor-cells = <0>;
+        };
+    };
+
+    thermal-zones {
+        pm8350_thermal: pm8350c-thermal {
+            polling-delay-passive = <100>;
+            polling-delay = <0>;
+            thermal-sensors = <&pm8350_temp_alarm>;
+
+            trips {
+                pm8350_trip0: trip0 {
+                    temperature = <95000>;
+                    hysteresis = <0>;
+                    type = "passive";
+                };
+
+                pm8350_crit: pm8350c-crit {
+                    temperature = <115000>;
+                    hysteresis = <0>;
+                    type = "critical";
+                };
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
deleted file mode 100644
index 2d5b2ad03314..000000000000
--- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-Qualcomm QPNP PMIC Temperature Alarm
-
-QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips
-that utilize the Qualcomm SPMI implementation. These peripherals provide an
-interrupt signal and status register to identify high PMIC die temperature.
-
-Required properties:
-- compatible:      Should contain "qcom,spmi-temp-alarm".
-- reg:             Specifies the SPMI address.
-- interrupts:      PMIC temperature alarm interrupt.
-- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description.
-
-Optional properties:
-- io-channels:     Should contain IIO channel specifier for the ADC channel,
-                   which report chip die temperature.
-- io-channel-names: Should contain "thermal".
-
-Example:
-
-	pm8941_temp: thermal-alarm@2400 {
-		compatible = "qcom,spmi-temp-alarm";
-		reg = <0x2400>;
-		interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
-		#thermal-sensor-cells = <0>;
-
-		io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
-		io-channel-names = "thermal";
-	};
-
-	thermal-zones {
-		pm8941 {
-			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-
-			thermal-sensors = <&pm8941_temp>;
-
-			trips {
-				stage1 {
-					temperature = <105000>;
-					hysteresis = <2000>;
-					type = "passive";
-				};
-				stage2 {
-					temperature = <125000>;
-					hysteresis = <2000>;
-					type = "critical";
-				};
-			};
-		};
-	};
-
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux