This patch provides generic driving setup, which support
2/4/6/8/10/12/14/16mA driving, original driver just set
raw data setup setting when use drive-strength property
Signed-off-by: Guodong Liu <guodong.liu@xxxxxxxxxxxx>
---
drivers/pinctrl/mediatek/pinctrl-mt8192.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt8192.c b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
index acccde9262ba..9faf7001369d 100644
--- a/drivers/pinctrl/mediatek/pinctrl-mt8192.c
+++ b/drivers/pinctrl/mediatek/pinctrl-mt8192.c
@@ -1372,8 +1372,8 @@ static const struct mtk_pin_soc mt8192_data = {
.gpio_m = 0,
.bias_set_combo = mtk_pinconf_bias_set_combo,
.bias_get_combo = mtk_pinconf_bias_get_combo,
- .drive_set = mtk_pinconf_drive_set_raw,
- .drive_get = mtk_pinconf_drive_get_raw,
+ .drive_set = mtk_pinconf_drive_set_rev1,
+ .drive_get = mtk_pinconf_drive_get_rev1,
.adv_pull_get = mtk_pinconf_adv_pull_get,
.adv_pull_set = mtk_pinconf_adv_pull_set,
.adv_drive_get = mtk_pinconf_adv_drive_get,
--
2.25.5
