Re: [PATCH 1/4] dt-bindings: arm: qcom: document qcom,msm-id and qcom,board-id

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 05/06/2022 17:07, Rob Herring wrote:
> On Sun, May 29, 2022 at 10:26:26PM +0200, Krzysztof Kozlowski wrote:
>> The top level qcom,msm-id and qcom,board-id properties are utilized by
>> bootloaders on Qualcomm MSM platforms to determine which device tree
>> should be used and passed to the kernel.
>>
>> The commit b32e592d3c28 ("devicetree: bindings: Document qcom board
>> compatible format") from 2015 was a consensus during discussion about
>> upstreaming qcom,msm-id and qcom,board-id fields.  There are however still
>> problems with that consensus:
>> 1. It was reached 7 years ago but it turned out its implementation did
>>    not reach all possible products.
>>
>> 2. Initially additional tool (dtbTool) was needed for parsing these
>>    fields to create a QCDT image consisting of multiple DTBs, later the
>>    bootloaders were improved and they use these qcom,msm-id and
>>    qcom,board-id properties directly.
>>
>> 3. Extracting relevant information from the board compatible requires
>>    this additional tool (dtbTool), which makes the build process more
>>    complicated and not easily reproducible (DTBs are modified after the
>>    kernel build).
>>
>> 4. Some versions of Qualcomm bootloaders expect these properties even
>>    when booting with a single DTB.  The community is stuck with these
>>    bootloaders thus they require properties in the DTBs.
>>
>> Since several upstreamed Qualcomm SoC-based boards require these
>> properties to properly boot and the properties are reportedly used by
>> bootloaders, document them.
> 
> My primary issue here is accepting this will be an endorsement for 
> other vendors doing something similar. I'm not against an ID 
> property(ies) in the root node, but would rather see something common 
> if we do anything.

Hi Rob,

A more common approach was merged back in 2015 - encoding this ID
information in the board compatibles. If I understood previous
discussion correctly, this common method was later used by Qualcomm DTB
post-processing tool. At least for some of the cases.

Other cases (several Qualcomm boards from different vendors) still use
these ID properties. It even turns out they use it differently between
vendors (e.g. Xiaomi vs OnePlus).

Important arguments for documenting these properties:
1. These ID properties are already on released boards where changing
bootloader is non-trivial or even not possible. It will not be possible
to remove these properties, without seriously affecting the community
working with them.

2. According to Konrad [1] (second paragraph), newer chipsets (starting
with sm8350 released in 2021) do not use these properties. These newer
DTS do not have them.

Considering 1+2 above, maybe let's document these properties as
compatible? Would that solve your point of "endorsement for other vendors"?

[1]
https://lore.kernel.org/all/20220522195138.35943-1-konrad.dybcio@xxxxxxxxxxxxxx/


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux