Add documentation for "innolux,td4328" panel. Signed-off-by: Teguh Sobirin <teguh@xxxxxxxx> --- .../display/panel/innolux,td4328.yaml | 83 +++++++++++++++++++ 1 file changed, 83 insertions(+) create mode 100755 Documentation/devicetree/bindings/display/panel/innolux,td4328.yaml diff --git a/Documentation/devicetree/bindings/display/panel/innolux,td4328.yaml b/Documentation/devicetree/bindings/display/panel/innolux,td4328.yaml new file mode 100755 index 000000000000..d4773ade0f13 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/innolux,td4328.yaml @@ -0,0 +1,83 @@ +# SPDX-License-Identifier: GPL-2.0 +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/display/panel/innolux,td4328.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Synaptics TD4328 based DSI display Panels + +maintainers: + - Teguh Sobirin <teguh@xxxxxxxx> + +description: | + The TD4328 IC from Synaptics is a DSI Panel IC used to drive DSI panels. + +allOf: + - $ref: panel-common.yaml# + +properties: + compatible: + const: innolux,td4328 + description: This indicates the panel manufacturer of the panel that is + in turn using the TD4328 panel driver. + + reset-gpios: + maxItems: 1 + description: phandle of gpio for reset line - This should be 8mA, gpio + can be configured using mux, pinctrl, pinctrl-names (active high) + + vddio-supply: + description: phandle of the regulator that provides the supply voltage + Power IC supply + + vddpos-supply: + description: phandle of the positive boost supply regulator + + vddneg-supply: + description: phandle of the negative boost supply regulator + + rotation: + description: Display rotation in degrees counter clockwise (0,90,180,270) + + reg: true + port: true + +required: + - compatible + - reg + - vddio-supply + - vddpos-supply + - vddneg-supply + - reset-gpios + - rotation + - port + +unevaluatedProperties: false + +examples: + - |+ + #include <dt-bindings/gpio/gpio.h> + + dsi0 { + #address-cells = <1>; + #size-cells = <0>; + + panel@0 { + compatible = "innolux,td4328"; + reg = <0>; + vddio-supply = <&vreg_l14a_1p88>; + vddpos-supply = <&lab>; + vddneg-supply = <&ibb>; + + reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>; + rotation = <90>; + + port { + panel0_in: endpoint { + remote-endpoint = <&dsi0_out>; + }; + }; + }; + }; + +... -- 2.30.2
