[PATCH 2/7] gpu: drm: panel: Add Innolux TD4328 panel driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Signed-off-by: Teguh Sobirin <teguh@xxxxxxxx>
---
 drivers/gpu/drm/panel/Kconfig                |   9 +
 drivers/gpu/drm/panel/Makefile               |   1 +
 drivers/gpu/drm/panel/panel-innolux-td4328.c | 339 +++++++++++++++++++
 3 files changed, 349 insertions(+)
 create mode 100644 drivers/gpu/drm/panel/panel-innolux-td4328.c

diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
index a89c03379db5..50ecd01872b9 100644
--- a/drivers/gpu/drm/panel/Kconfig
+++ b/drivers/gpu/drm/panel/Kconfig
@@ -202,6 +202,15 @@ config DRM_PANEL_INNOLUX_P079ZCA
 	  24 bit RGB per pixel. It provides a MIPI DSI interface to
 	  the host and has a built-in LED backlight.
 
+config DRM_PANEL_INNOLUX_TD4328
+	tristate "Innolux TD4328 DSI panel"
+	depends on OF
+	depends on DRM_MIPI_DSI
+	depends on BACKLIGHT_CLASS_DEVICE
+	help
+	  Say Y here if you want to enable support for the panels built
+	  around the Innolux TD4328 display controller.
+
 config DRM_PANEL_JDI_LT070ME05000
 	tristate "JDI LT070ME05000 WUXGA DSI panel"
 	depends on OF
diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
index ddf488b96cb3..cc3389a13a2a 100644
--- a/drivers/gpu/drm/panel/Makefile
+++ b/drivers/gpu/drm/panel/Makefile
@@ -18,6 +18,7 @@ obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9341) += panel-ilitek-ili9341.o
 obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_EJ030NA) += panel-innolux-ej030na.o
 obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
+obj-$(CONFIG_DRM_PANEL_INNOLUX_TD4328) += panel-innolux-td4328.o
 obj-$(CONFIG_DRM_PANEL_JDI_LT070ME05000) += panel-jdi-lt070me05000.o
 obj-$(CONFIG_DRM_PANEL_JDI_R63452) += panel-jdi-fhd-r63452.o
 obj-$(CONFIG_DRM_PANEL_KHADAS_TS050) += panel-khadas-ts050.o
diff --git a/drivers/gpu/drm/panel/panel-innolux-td4328.c b/drivers/gpu/drm/panel/panel-innolux-td4328.c
new file mode 100644
index 000000000000..7c17f8c06512
--- /dev/null
+++ b/drivers/gpu/drm/panel/panel-innolux-td4328.c
@@ -0,0 +1,339 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2022 Teguh Sobirin
+ * Author: Teguh Sobirin <teguh@xxxxxxxx>
+ *
+ * This driver is for the DSI interface to Innolux panel
+ * Using the TD4328 display driver IC from Synaptics.
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regulator/consumer.h>
+
+#include <video/display_timing.h>
+#include <video/mipi_display.h>
+
+#include <drm/drm_mipi_dsi.h>
+#include <drm/drm_modes.h>
+#include <drm/drm_panel.h>
+
+struct td4328 {
+	struct device *dev;
+	struct drm_panel panel;
+	struct regulator *supply;
+	struct gpio_desc *reset_gpio;
+	enum drm_panel_orientation orientation;
+	bool prepared;
+};
+
+static inline struct td4328 *panel_to_td4328(struct drm_panel *panel)
+{
+	return container_of(panel, struct td4328, panel);
+}
+
+static int td4328_init_sequence(struct td4328 *ctx)
+{
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	struct device *dev = ctx->dev;
+	int ret;
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to exit sleep mode: %d\n", ret);
+		return ret;
+	}
+	msleep(70);
+
+	ret = mipi_dsi_dcs_set_column_address(dsi, 0, 1080 - 1);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set sleep column address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_page_address(dsi, 0, 1920 - 1);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set sleep page address: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_tear_on(dsi, MIPI_DSI_DCS_TEAR_MODE_VBLANK);
+
+	if (ret < 0) {
+		dev_err(dev, "Failed to set tear on: %d\n", ret);
+		return ret;
+	}
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(dev, "Failed to set display on: %d\n", ret);
+		return ret;
+	}
+
+	dev_dbg(dev, "Panel init sequence done\n");
+	return 0;
+}
+
+static int td4328_unprepare(struct drm_panel *panel)
+{
+	struct td4328 *ctx = panel_to_td4328(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (!ctx->prepared)
+		return 0;
+
+	ret = mipi_dsi_dcs_set_display_off(dsi);
+	if (ret < 0)
+		dev_err(ctx->dev, "failed to set display off: %d\n", ret);
+
+	ret = mipi_dsi_dcs_enter_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(ctx->dev, "failed to enter sleep mode: %d\n", ret);
+		return ret;
+	}
+
+	regulator_disable(ctx->supply);
+
+	ctx->prepared = false;
+
+	return 0;
+}
+
+static int td4328_prepare(struct drm_panel *panel)
+{
+	struct td4328 *ctx = panel_to_td4328(panel);
+	struct mipi_dsi_device *dsi = to_mipi_dsi_device(ctx->dev);
+	int ret;
+
+	if (ctx->prepared)
+		return 0;
+
+	dev_dbg(ctx->dev, "Resetting the panel\n");
+	ret = regulator_enable(ctx->supply);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to enable supply: %d\n", ret);
+		return ret;
+	}
+
+	msleep(20);
+
+	gpiod_set_value_cansleep(ctx->reset_gpio, 1);
+	usleep_range(10, 20);
+	gpiod_set_value_cansleep(ctx->reset_gpio, 0);
+
+	msleep(20);
+
+	ret = mipi_dsi_dcs_exit_sleep_mode(dsi);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to exit sleep mode: %d\n", ret);
+		goto disable_supply;
+	}
+
+	msleep(250);
+
+	ret = td4328_init_sequence(ctx);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Panel init sequence failed: %d\n", ret);
+		goto disable_supply;
+	}
+
+	ret = mipi_dsi_dcs_set_display_on(dsi);
+	if (ret < 0) {
+		dev_err(ctx->dev, "Failed to set display on: %d\n", ret);
+		goto disable_supply;
+	}
+
+	msleep(50);
+
+	ctx->prepared = true;
+
+	return 0;
+
+disable_supply:
+	regulator_disable(ctx->supply);
+	return ret;
+}
+
+static const struct drm_display_mode default_mode = {
+	.clock       = (1080 + 60 + 10 + 60) * (1920 + 20 + 8 + 20) * 60 / 1000,
+	.hdisplay    = 1080,
+	.hsync_start = 1080 + 60,
+	.hsync_end   = 1080 + 60 + 10,
+	.htotal      = 1080 + 60 + 10 + 60,
+	.vdisplay    = 1920,
+	.vsync_start = 1920 + 20,
+	.vsync_end   = 1920 + 20 + 8,
+	.vtotal      = 1920 + 20 + 8 + 20,
+	.width_mm    = 75,
+	.height_mm   = 132,
+};
+
+static int td4328_get_modes(struct drm_panel *panel,
+				struct drm_connector *connector)
+{
+	struct td4328 *ctx = panel_to_td4328(panel);
+	struct drm_display_mode *mode;
+
+	mode = drm_mode_duplicate(connector->dev, &default_mode);
+	if (!mode) {
+		dev_err(ctx->dev, "Failed to add mode %ux%u@%u\n",
+			default_mode.hdisplay, default_mode.vdisplay,
+			drm_mode_vrefresh(&default_mode));
+		return -ENOMEM;
+	}
+
+	drm_mode_set_name(mode);
+
+	mode->type = DRM_MODE_TYPE_DRIVER | DRM_MODE_TYPE_PREFERRED;
+	connector->display_info.width_mm = mode->width_mm;
+	connector->display_info.height_mm = mode->height_mm;
+	drm_mode_probed_add(connector, mode);
+	drm_connector_set_panel_orientation(connector, ctx->orientation);
+
+	return 1;
+}
+
+static const struct drm_panel_funcs td4328_funcs = {
+	.unprepare	= td4328_unprepare,
+	.prepare	= td4328_prepare,
+	.get_modes	= td4328_get_modes,
+};
+
+static int td4328_probe(struct mipi_dsi_device *dsi)
+{
+	struct device *dev = &dsi->dev;
+	struct td4328 *ctx;
+	int ret;
+
+	ctx = devm_kzalloc(dev, sizeof(*ctx), GFP_KERNEL);
+	if (!ctx)
+		return -ENOMEM;
+
+	ctx->reset_gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH);
+	if (IS_ERR(ctx->reset_gpio)) {
+		dev_err(dev, "cannot get reset gpio\n");
+		return PTR_ERR(ctx->reset_gpio);
+	}
+
+	ctx->supply = devm_regulator_get(dev, "vdd");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to request vdd regulator: %d\n", ret);
+		return ret;
+	}
+
+	ctx->supply = devm_regulator_get(dev, "vddio");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to request vddio regulator: %d\n", ret);
+		return ret;
+	}
+
+	ctx->supply = devm_regulator_get(dev, "vddpos");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to request vddpos regulator: %d\n", ret);
+		return ret;
+	}
+
+	ctx->supply = devm_regulator_get(dev, "vddneg");
+	if (IS_ERR(ctx->supply)) {
+		ret = PTR_ERR(ctx->supply);
+		if (ret != -EPROBE_DEFER)
+			dev_err(dev, "Failed to request vddneg regulator: %d\n", ret);
+		return ret;
+	}
+
+	ret = of_drm_get_panel_orientation(dev->of_node, &ctx->orientation);
+	if (ret < 0) {
+		dev_err(dev, "Failed to get orientation %d\n", ret);
+		return ret;
+	}
+
+	mipi_dsi_set_drvdata(dsi, ctx);
+
+	ctx->dev = dev;
+
+	dsi->lanes = 4;
+	dsi->format = MIPI_DSI_FMT_RGB888;
+	dsi->mode_flags = MIPI_DSI_MODE_LPM
+		| MIPI_DSI_MODE_VIDEO_HSE
+		| MIPI_DSI_CLOCK_NON_CONTINUOUS
+		| MIPI_DSI_MODE_VIDEO_BURST
+		| MIPI_DSI_MODE_NO_EOT_PACKET;
+
+	drm_panel_init(&ctx->panel, &dsi->dev, &td4328_funcs,
+		       DRM_MODE_CONNECTOR_DSI);
+
+	ret = drm_panel_of_backlight(&ctx->panel);
+	if (ret)
+		return ret;
+
+	drm_panel_add(&ctx->panel);
+
+	ret = mipi_dsi_attach(dsi);
+	if (ret < 0) {
+		dev_err(dev, "mipi_dsi_attach failed: %d\n", ret);
+		drm_panel_remove(&ctx->panel);
+		return ret;
+	}
+
+	return 0;
+}
+
+static void td4328_shutdown(struct mipi_dsi_device *dsi)
+{
+	struct td4328 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	ret = drm_panel_unprepare(&ctx->panel);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to unprepare panel: %d\n", ret);
+
+	ret = drm_panel_disable(&ctx->panel);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to disable panel: %d\n", ret);
+}
+
+static int td4328_remove(struct mipi_dsi_device *dsi)
+{
+	struct td4328 *ctx = mipi_dsi_get_drvdata(dsi);
+	int ret;
+
+	td4328_shutdown(dsi);
+
+	ret = mipi_dsi_detach(dsi);
+	if (ret < 0)
+		dev_err(&dsi->dev, "Failed to detach from DSI host: %d\n", ret);
+
+	drm_panel_remove(&ctx->panel);
+
+	return 0;
+}
+
+static const struct of_device_id td4328_of_match[] = {
+	{ .compatible = "innolux,td4328" },
+	{ /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, td4328_of_match);
+
+static struct mipi_dsi_driver td4328_driver = {
+	.driver = {
+		.name = "panel-innolux-td4328",
+		.of_match_table = td4328_of_match,
+	},
+	.probe	= td4328_probe,
+	.remove = td4328_remove,
+	.shutdown = td4328_shutdown,
+};
+module_mipi_dsi_driver(td4328_driver);
+
+MODULE_AUTHOR("Teguh Sobirin <teguh@xxxxxxxx>");
+MODULE_DESCRIPTION("DRM driver for TD4328 cmd mode DSI Innolux panel");
+MODULE_LICENSE("GPL v2");
-- 
2.30.2




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux