Re: [PATCH 1/2] dt-bindings: backlight: rt4831: Add the new property for ocp level selection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 02/06/2022 17:31, ChiYuan Huang wrote:
> Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 於 2022年6月2日 週四 下午9:58寫道:
>>
>> On 02/06/2022 15:56, Rob Herring wrote:
>>> On Thu, May 26, 2022 at 12:32:12PM +0200, Krzysztof Kozlowski wrote:
>>>> On 26/05/2022 10:13, ChiYuan Huang wrote:
>>>>> Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 於 2022年5月26日 週四 下午4:06寫道:
>>>>>>
>>>>>> On 26/05/2022 05:16, cy_huang wrote:
>>>>>>> From: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
>>>>>>>
>>>>>>> Add the new property for ocp level selection.
>>>>>>>
>>>>>>> Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx>
>>>>>>> ---
>>>>>>>  .../bindings/leds/backlight/richtek,rt4831-backlight.yaml         | 8 ++++++++
>>>>>>>  include/dt-bindings/leds/rt4831-backlight.h                       | 5 +++++
>>>>>>>  2 files changed, 13 insertions(+)
>>>>>>>
>>>>>>> diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>>>> index e0ac686..c1c59de 100644
>>>>>>> --- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>>>> +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml
>>>>>>> @@ -47,6 +47,14 @@ properties:
>>>>>>>      minimum: 0
>>>>>>>      maximum: 3
>>>>>>>
>>>>>>> +  richtek,bled-ocp-sel:
>>>>>>
>>>>>> Skip "sel" as it is a shortcut of selection. Name instead:
>>>>>> "richtek,backlight-ocp"
>>>>>>
>>>>> OK, if so, do I need to rename all properties from 'bled' to 'backlight' ?
>>>>> If  only this property is naming as 'backlight'. it may conflict with
>>>>> the others like as "richtek,bled-ovp-sel".
>>>>
>>>> Ah, no, no need.
>>>>
>>>>>>
>>>>>>> +    description: |
>>>>>>> +      Backlight OCP level selection, currently support 0.9A/1.2A/1.5A/1.8A
>>>>>>
>>>>>> Could you explain here what is OCP (unfold the acronym)?
>>>>> Yes. And the full name is 'over current protection'.
>>>>
>>>> Thanks and this leads to second thing - you encode register value
>>>> instead of logical value. This must be a logical value in mA, so
>>>> "richtek,bled-ocp-microamp".
>>>
>>> We already have common properties for setting current of LEDs. We should
>>> use that here I think.
>>
>> It might not be exactly the same. We have "led-max-microamp" which is
>> the maximum allowed current. I guess over-current protection level  is
>> slightly higher (e.g. led-max-microamp + 1). IOW, led-max-microamp is
>> something which still can be set and used by system/hardware. OCP should
>> not.
>>
> Yap, you're right.

So I am right or Rob?

> From the modern backlight IC design, it uses the boost converter architecture.
> This OCP level is to limit the inductor current when the internal MOS
> switch turn on.
> Details can refer to the below wiki link
> https://en.wikipedia.org/wiki/Boost_converter
> 
> And based on it, OVP is used to limit the inductor output voltage.
> Each channel maximum current is based on the IC affordable limit.
> It is more like as what you said 'led-max-microamp'.
> 
> So boost voltage level may depend on the LED VF.
> The different series of LED may cause different boost voltage.
> 
> RT4831's OVP/OCP is not just the protection, more like as the limit.

This suggests Rob is right, so let's use led-max-microamp property?

Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux