Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> 於 2022年5月26日 週四 下午4:06寫道： > > On 26/05/2022 05:16, cy_huang wrote: > > From: ChiYuan Huang <cy_huang@xxxxxxxxxxx> > > > > Add the new property for ocp level selection. > > > > Signed-off-by: ChiYuan Huang <cy_huang@xxxxxxxxxxx> > > --- > > .../bindings/leds/backlight/richtek,rt4831-backlight.yaml | 8 ++++++++ > > include/dt-bindings/leds/rt4831-backlight.h | 5 +++++ > > 2 files changed, 13 insertions(+) > > > > diff --git a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > > index e0ac686..c1c59de 100644 > > --- a/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > > +++ b/Documentation/devicetree/bindings/leds/backlight/richtek,rt4831-backlight.yaml > > @@ -47,6 +47,14 @@ properties: > > minimum: 0 > > maximum: 3 > > > > + richtek,bled-ocp-sel: > > Skip "sel" as it is a shortcut of selection. Name instead: > "richtek,backlight-ocp" > OK, if so, do I need to rename all properties from 'bled' to 'backlight' ? If only this property is naming as 'backlight'. it may conflict with the others like as "richtek,bled-ovp-sel". > > > + description: | > > + Backlight OCP level selection, currently support 0.9A/1.2A/1.5A/1.8A > > Could you explain here what is OCP (unfold the acronym)? Yes. And the full name is 'over current protection'. > > > Best regards, > Krzysztof
