[PATCH v3 1/8] ARM: dts: s3c2410: use local header for pinctrl register values

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



The DTS uses hardware register values directly in pin controller pin
configuration.  These are not some IDs or other abstraction layer but
raw numbers used in the registers.

These numbers were previously put in the bindings header to avoid code
duplication and to provide some context meaning (name), but they do not
fit the purpose of bindings.  It is also quite confusing to use
constants prefixed with Exynos for other SoC, because there is actually
nothing here in common, except the actual value.

Store the constants in a header next to DTS and use them instead of
bindings.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx>
Reviewed-by: Chanho Park <chanho61.park@xxxxxxxxxxx>
---
 arch/arm/boot/dts/s3c2410-pinctrl.h    | 19 +++++++++++++
 arch/arm/boot/dts/s3c2416-pinctrl.dtsi | 38 +++++++++++++-------------
 2 files changed, 38 insertions(+), 19 deletions(-)
 create mode 100644 arch/arm/boot/dts/s3c2410-pinctrl.h

diff --git a/arch/arm/boot/dts/s3c2410-pinctrl.h b/arch/arm/boot/dts/s3c2410-pinctrl.h
new file mode 100644
index 000000000000..76b6171ae149
--- /dev/null
+++ b/arch/arm/boot/dts/s3c2410-pinctrl.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Samsung S3C2410 DTS pinctrl constants
+ *
+ * Copyright (c) 2016 Samsung Electronics Co., Ltd.
+ *		http://www.samsung.com
+ * Copyright (c) 2022 Linaro Ltd
+ * Author: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
+ */
+
+#ifndef __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
+#define __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__
+
+#define S3C2410_PIN_FUNC_INPUT		0
+#define S3C2410_PIN_FUNC_OUTPUT		1
+#define S3C2410_PIN_FUNC_2		2
+#define S3C2410_PIN_FUNC_3		3
+
+#endif /* __DTS_ARM_SAMSUNG_S3C2410_PINCTRL_H__ */
diff --git a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
index 20a7d72827c2..3268366bd8bc 100644
--- a/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
+++ b/arch/arm/boot/dts/s3c2416-pinctrl.dtsi
@@ -5,7 +5,7 @@
  * Copyright (c) 2013 Heiko Stuebner <heiko@xxxxxxxxx>
  */
 
-#include <dt-bindings/pinctrl/samsung.h>
+#include "s3c2410-pinctrl.h"
 
 &pinctrl_0 {
 	/*
@@ -82,91 +82,91 @@ gpm: gpm-gpio-bank {
 
 	uart0_data: uart0-data-pins {
 		samsung,pins = "gph-0", "gph-1";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	uart0_fctl: uart0-fctl-pins {
 		samsung,pins = "gph-8", "gph-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	uart1_data: uart1-data-pins {
 		samsung,pins = "gph-2", "gph-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	uart1_fctl: uart1-fctl-pins {
 		samsung,pins = "gph-10", "gph-11";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	uart2_data: uart2-data-pins {
 		samsung,pins = "gph-4", "gph-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	uart2_fctl: uart2-fctl-pins {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	uart3_data: uart3-data-pins {
 		samsung,pins = "gph-6", "gph-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	extuart_clk: extuart-clk-pins {
 		samsung,pins = "gph-12";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	i2c0_bus: i2c0-bus-pins {
 		samsung,pins = "gpe-14", "gpe-15";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	spi0_bus: spi0-bus-pins {
 		samsung,pins = "gpe-11", "gpe-12", "gpe-13";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd0_clk: sd0-clk-pins {
 		samsung,pins = "gpe-5";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd0_cmd: sd0-cmd-pins {
 		samsung,pins = "gpe-6";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd0_bus1: sd0-bus1-pins {
 		samsung,pins = "gpe-7";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd0_bus4: sd0-bus4-pins {
 		samsung,pins = "gpe-8", "gpe-9", "gpe-10";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd1_cmd: sd1-cmd-pins {
 		samsung,pins = "gpl-8";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd1_clk: sd1-clk-pins {
 		samsung,pins = "gpl-9";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd1_bus1: sd1-bus1-pins {
 		samsung,pins = "gpl-0";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 
 	sd1_bus4: sd1-bus4-pins {
 		samsung,pins = "gpl-1", "gpl-2", "gpl-3";
-		samsung,pin-function = <EXYNOS_PIN_FUNC_2>;
+		samsung,pin-function = <S3C2410_PIN_FUNC_2>;
 	};
 };
-- 
2.34.1




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux