From: Anton Bambura <jenneron@xxxxxxxxxxxxxx>
Adds initial support for the LG G7 (judyln) and
LG V35 (judyp) phones.
Currently supported features:
- Display via simplefb (panel driver is WIP)
- Keys
- Micro SD card
- Modem (not tested much, but initialises)
- UFS (crashes during intensive workloads, may need quirks)
- USB in peripheral mode
Changes since v1:
- Enabled GPU
- Changed some node names
- Moved framebuffer node from common dtsi
I did not change the regulator node names as adding -regulator
everywhere broke USB networking, and as such I reverted it to what
OnePlus 6's common dtsi is doing given that it's well-tested. I do not
have time to debug this further at the moment since I won't have access
to the phone for about 3 months, so I hope this is okay. If not, I'll
have to look into it at a later point.
Signed-off-by: Anton Bambura <jenneron@xxxxxxxxxxxxxx>
Signed-off-by: Stefan Hansson <newbie13xd@xxxxxxxxx>
Tested-by: Gregari Ivanov <llamashere@xxxxxxxxx>
---
arch/arm64/boot/dts/qcom/Makefile | 2 +
.../arm64/boot/dts/qcom/sdm845-lg-common.dtsi | 614 ++++++++++++++++++
arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts | 68 ++
arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts | 44 ++
4 files changed, 728 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
create mode 100644 arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index f9e6343acd03..2f31e62f550c 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -99,6 +99,8 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r1.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-cheza-r3.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-db845c.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyln.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sdm845-lg-judyp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-enchilada.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm845-oneplus-fajita.dtb
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
new file mode 100644
index 000000000000..e882554b3da8
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-common.dtsi
@@ -0,0 +1,614 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 / V35 (judyln / judyp) common device tree
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
+#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+
+#include "sdm845.dtsi"
+#include "pm8998.dtsi"
+#include "pmi8998.dtsi"
+
+/delete-node/ &adsp_mem;
+/delete-node/ &cdsp_mem;
+/delete-node/ &gpu_mem;
+/delete-node/ &ipa_fw_mem;
+/delete-node/ &mba_region;
+/delete-node/ &mpss_region;
+/delete-node/ &qseecom_mem;
+/delete-node/ &rmtfs_mem;
+/delete-node/ &slpi_mem;
+/delete-node/ &spss_mem;
+/delete-node/ &venus_mem;
+/delete-node/ &wlan_msa_mem;
+
+/ {
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ qseecom_mem: memory@b2000000 {
+ reg = <0 0xb2000000 0 0x1800000>;
+ no-map;
+ };
+
+ gpu_mem: memory@8c415000 {
+ reg = <0 0x8c415000 0 0x2000>;
+ no-map;
+ };
+
+ ipa_fw_mem: memory@8c400000 {
+ reg = <0 0x8c400000 0 0x10000>;
+ no-map;
+ };
+
+ adsp_mem: memory@8c500000 {
+ reg = <0 0x8c500000 0 0x1e00000>;
+ no-map;
+ };
+
+ wlan_msa_mem: memory@8e300000 {
+ reg = <0 0x8e300000 0 0x100000>;
+ no-map;
+ };
+
+ mpss_region: memory@8e400000 {
+ reg = <0 0x8e400000 0 0x8900000>;
+ no-map;
+ };
+
+ venus_mem: memory@96d00000 {
+ reg = <0 0x96d00000 0 0x500000>;
+ no-map;
+ };
+
+ cdsp_mem: memory@97200000 {
+ reg = <0 0x97200000 0 0x800000>;
+ no-map;
+ };
+
+ mba_region: memory@97a00000 {
+ reg = <0 0x97a00000 0 0x200000>;
+ no-map;
+ };
+
+ slpi_mem: memory@97c00000 {
+ reg = <0 0x97c00000 0 0x1400000>;
+ no-map;
+ };
+
+ spss_mem: memory@99000000 {
+ reg = <0 0x99000000 0 0x100000>;
+ no-map;
+ };
+
+ /* Framebuffer region */
+ memory@9d400000 {
+ reg = <0x0 0x9d400000 0x0 0x2400000>;
+ no-map;
+ };
+
+ /* rmtfs lower guard */
+ memory@f0800000 {
+ reg = <0 0xf0800000 0 0x1000>;
+ no-map;
+ };
+
+ rmtfs_mem: memory@f0801000 {
+ compatible = "qcom,rmtfs-mem";
+ reg = <0 0xf0801000 0 0x200000>;
+ no-map;
+
+ qcom,client-id = <1>;
+ qcom,vmid = <15>;
+ };
+
+ /* rmtfs upper guard */
+ memory@f0a01000 {
+ reg = <0 0xf0a01000 0 0x1000>;
+ no-map;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&vol_up_pin_a>;
+
+ label = "GPIO Buttons";
+
+ key-vol-up {
+ label = "Volume up";
+ linux,code = <KEY_VOLUMEUP>;
+ gpios = <&pm8998_gpio 6 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ vph_pwr: vph-pwr-regulator {
+ compatible = "regulator-fixed";
+ regulator-name = "vph_pwr";
+ regulator-min-microvolt = <3700000>;
+ regulator-max-microvolt = <3700000>;
+ };
+
+ /*
+ * Apparently RPMh does not provide support for PM8998 S4 because it
+ * is always-on; model it as a fixed regulator.
+ */
+ vreg_s4a_1p8: pm8998-smps4 {
+ compatible = "regulator-fixed";
+ regulator-name = "vreg_s4a_1p8";
+
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+
+ regulator-always-on;
+ regulator-boot-on;
+
+ vin-supply = <&vph_pwr>;
+ };
+};
+
+&adsp_pas {
+ status = "okay";
+};
+
+&apps_rsc {
+ pm8998-rpmh-regulators {
+ compatible = "qcom,pm8998-rpmh-regulators";
+ qcom,pmic-id = "a";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+ vdd-s5-supply = <&vph_pwr>;
+ vdd-s6-supply = <&vph_pwr>;
+ vdd-s7-supply = <&vph_pwr>;
+ vdd-s8-supply = <&vph_pwr>;
+ vdd-s9-supply = <&vph_pwr>;
+ vdd-s10-supply = <&vph_pwr>;
+ vdd-s11-supply = <&vph_pwr>;
+ vdd-s12-supply = <&vph_pwr>;
+ vdd-s13-supply = <&vph_pwr>;
+ vdd-l1-l27-supply = <&vreg_s7a_1p025>;
+ vdd-l2-l8-l17-supply = <&vreg_s3a_1p35>;
+ vdd-l3-l11-supply = <&vreg_s7a_1p025>;
+ vdd-l4-l5-supply = <&vreg_s7a_1p025>;
+ vdd-l6-supply = <&vph_pwr>;
+ vdd-l7-l12-l14-l15-supply = <&vreg_s5a_2p04>;
+ vdd-l9-supply = <&vreg_bob>;
+ vdd-l10-l23-l25-supply = <&vreg_bob>;
+ vdd-l13-l19-l21-supply = <&vreg_bob>;
+ vdd-l16-l28-supply = <&vreg_bob>;
+ vdd-l18-l22-supply = <&vreg_bob>;
+ vdd-l20-l24-supply = <&vreg_bob>;
+ vdd-l26-supply = <&vreg_s3a_1p35>;
+ vin-lvs-1-2-supply = <&vreg_s4a_1p8>;
+
+ vreg_s2a_1p125: smps2 {
+ regulator-min-microvolt = <1100000>;
+ regulator-max-microvolt = <1100000>;
+ };
+
+ vreg_s3a_1p35: smps3 {
+ regulator-min-microvolt = <1352000>;
+ regulator-max-microvolt = <1352000>;
+ };
+
+ vreg_s5a_2p04: smps5 {
+ regulator-min-microvolt = <1904000>;
+ regulator-max-microvolt = <2040000>;
+ };
+
+ vreg_s7a_1p025: smps7 {
+ regulator-min-microvolt = <900000>;
+ regulator-max-microvolt = <1028000>;
+ };
+
+ vdd_qusb_hs0:
+ vdda_hp_pcie_core:
+ vdda_mipi_csi0_0p9:
+ vdda_mipi_csi1_0p9:
+ vdda_mipi_csi2_0p9:
+ vdda_mipi_dsi0_pll:
+ vdda_mipi_dsi1_pll:
+ vdda_qlink_lv:
+ vdda_qlink_lv_ck:
+ vdda_qrefs_0p875:
+ vdda_pcie_core:
+ vdda_pll_cc_ebi01:
+ vdda_pll_cc_ebi23:
+ vdda_sp_sensor:
+ vdda_ufs1_core:
+ vdda_ufs2_core:
+ vdda_usb1_ss_core:
+ vdda_usb2_ss_core:
+ vreg_l1a_0p875: ldo1 {
+ regulator-min-microvolt = <880000>;
+ regulator-max-microvolt = <880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_10:
+ vreg_l2a_1p2: ldo2 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ regulator-always-on;
+ };
+
+ vreg_l3a_1p0: ldo3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_wcss_cx:
+ vdd_wcss_mx:
+ vdda_wcss_pll:
+ vreg_l5a_0p8: ldo5 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_13:
+ vreg_l6a_1p8: ldo6 {
+ regulator-min-microvolt = <1856000>;
+ regulator-max-microvolt = <1856000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l7a_1p8: ldo7 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l8a_1p2: ldo8 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1248000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l9a_1p8: ldo9 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l10a_1p8: ldo10 {
+ regulator-min-microvolt = <1704000>;
+ regulator-max-microvolt = <2928000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l11a_1p0: ldo11 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1048000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdd_qfprom:
+ vdd_qfprom_sp:
+ vdda_apc1_cs_1p8:
+ vdda_gfx_cs_1p8:
+ vdda_qrefs_1p8:
+ vdda_qusb_hs0_1p8:
+ vddpx_11:
+ vreg_l12a_1p8: ldo12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vddpx_2:
+ vreg_l13a_2p95: ldo13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l14a_1p88: ldo14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1880000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l15a_1p8: ldo15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l17a_1p3: ldo17 {
+ regulator-min-microvolt = <1304000>;
+ regulator-max-microvolt = <1304000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l18a_2p7: ldo18 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l20a_2p95: ldo20 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l21a_2p95: ldo21 {
+ regulator-min-microvolt = <2704000>;
+ regulator-max-microvolt = <2960000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l22a_2p85: ldo22 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l23a_3p3: ldo23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_qusb_hs0_3p1:
+ vreg_l24a_3p075: ldo24 {
+ regulator-min-microvolt = <3088000>;
+ regulator-max-microvolt = <3088000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l25a_3p3: ldo25 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3312000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vdda_hp_pcie_1p2:
+ vdda_hv_ebi0:
+ vdda_hv_ebi1:
+ vdda_hv_ebi2:
+ vdda_hv_ebi3:
+ vdda_mipi_csi_1p25:
+ vdda_mipi_dsi0_1p2:
+ vdda_mipi_dsi1_1p2:
+ vdda_pcie_1p2:
+ vdda_ufs1_1p2:
+ vdda_ufs2_1p2:
+ vdda_usb1_ss_1p2:
+ vdda_usb2_ss_1p2:
+ vreg_l26a_1p2: ldo26 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_l28a_3p0: ldo28 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
+ };
+
+ vreg_lvs1a_1p8: lvs1 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ vreg_lvs2a_1p8: lvs2 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+ };
+
+ pmi8998-rpmh-regulators {
+ compatible = "qcom,pmi8998-rpmh-regulators";
+ qcom,pmic-id = "b";
+
+ vdd-bob-supply = <&vph_pwr>;
+
+ vreg_bob: bob {
+ regulator-min-microvolt = <3312000>;
+ regulator-max-microvolt = <3600000>;
+ regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+ regulator-allow-bypass;
+ };
+ };
+
+ pm8005-rpmh-regulators {
+ compatible = "qcom,pm8005-rpmh-regulators";
+ qcom,pmic-id = "c";
+
+ vdd-s1-supply = <&vph_pwr>;
+ vdd-s2-supply = <&vph_pwr>;
+ vdd-s3-supply = <&vph_pwr>;
+ vdd-s4-supply = <&vph_pwr>;
+
+ vreg_s3c_0p6: smps3 {
+ regulator-min-microvolt = <600000>;
+ regulator-max-microvolt = <600000>;
+ };
+ };
+};
+
+&cdsp_pas {
+ status = "okay";
+};
+
+&dispcc {
+ status = "disabled";
+};
+
+&gcc {
+ protected-clocks = <GCC_QSPI_CORE_CLK>,
+ <GCC_QSPI_CORE_CLK_SRC>,
+ <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
+ <GCC_LPASS_Q6_AXI_CLK>,
+ <GCC_LPASS_SWAY_CLK>;
+};
+
+&gpu {
+ status = "okay";
+
+ zap-shader {
+ memory-region = <&gpu_mem>;
+ };
+};
+
+&ipa {
+ status = "okay";
+ modem-init;
+};
+
+&mss_pil {
+ status = "okay";
+};
+
+&pm8998_pon {
+ resin {
+ compatible = "qcom,pm8941-resin";
+ interrupts = <0x0 0x8 1 IRQ_TYPE_EDGE_BOTH>;
+ debounce = <15625>;
+ bias-pull-up;
+ linux,code = <KEY_VOLUMEDOWN>;
+ };
+};
+
+&sdhc_2 {
+ status = "okay";
+
+ cd-gpios = <&tlmm 126 GPIO_ACTIVE_LOW>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data &sd_card_det_n>;
+
+ vmmc-supply = <&vreg_l21a_2p95>;
+ vqmmc-supply = <&vddpx_2>;
+};
+
+/*
+ * UFS works partially and only with clk_ignore_unused.
+ * Sometimes it crashes with I/O errors.
+ */
+&ufs_mem_hc {
+ status = "okay";
+
+ reset-gpios = <&tlmm 150 GPIO_ACTIVE_LOW>;
+
+ vcc-supply = <&vreg_l20a_2p95>;
+ vcc-max-microamp = <600000>;
+};
+
+&ufs_mem_phy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_ufs1_core>;
+ vdda-pll-supply = <&vdda_ufs1_1p2>;
+};
+
+&usb_1 {
+ status = "okay";
+};
+
+&usb_1_dwc3 {
+ /* TODO: these devices have usb id pin */
+ dr_mode = "peripheral";
+};
+
+&usb_1_hsphy {
+ status = "okay";
+
+ vdd-supply = <&vdda_usb1_ss_core>;
+ vdda-pll-supply = <&vdda_qusb_hs0_1p8>;
+ vdda-phy-dpdm-supply = <&vdda_qusb_hs0_3p1>;
+
+ qcom,imp-res-offset-value = <8>;
+ qcom,hstx-trim-value = <QUSB2_V2_HSTX_TRIM_21_6_MA>;
+ qcom,preemphasis-level = <QUSB2_V2_PREEMPHASIS_5_PERCENT>;
+ qcom,preemphasis-width = <QUSB2_V2_PREEMPHASIS_WIDTH_HALF_BIT>;
+};
+
+&usb_1_qmpphy {
+ status = "okay";
+
+ vdda-phy-supply = <&vdda_usb1_ss_1p2>;
+ vdda-pll-supply = <&vdda_usb1_ss_core>;
+};
+
+/* PINCTRL - additions to nodes defined in sdm845.dtsi */
+
+&tlmm {
+ gpio-reserved-ranges = <28 4>, <81 4>;
+
+ sdc2_clk: sdc2-clk {
+ pinconf {
+ pins = "sdc2_clk";
+ bias-disable;
+
+ /*
+ * It seems that mmc_test reports errors if drive
+ * strength is not 16 on clk, cmd, and data pins.
+ *
+ * TODO: copy-pasted from mtp, try other values
+ * on these devices.
+ */
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_cmd: sdc2-cmd {
+ pinconf {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sdc2_data: sdc2-data {
+ pinconf {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <16>;
+ };
+ };
+
+ sd_card_det_n: sd-card-det-n {
+ pinmux {
+ pins = "gpio126";
+ function = "gpio";
+ };
+
+ pinconf {
+ pins = "gpio126";
+ bias-pull-up;
+ };
+ };
+};
+
+&pm8998_gpio {
+ vol_up_pin_a: vol-up-active-pins {
+ pins = "gpio6";
+ function = "normal";
+ input-enable;
+ bias-pull-up;
+ qcom,drive-strength = <PMIC_GPIO_STRENGTH_NO>;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
new file mode 100644
index 000000000000..7d967a104b3e
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyln.dts
@@ -0,0 +1,68 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG G7 (judyln) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+ model = "LG G7 ThinQ";
+ compatible = "lg,judyln", "qcom,sdm845";
+
+ chosen {
+ framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9d400000 0x0 (1440 * 3120 * 4)>;
+ width = <1440>;
+ height = <3120>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ lab-supply = <&lab>;
+ ibb-supply = <&ibb>;
+ };
+ };
+
+ /* Additional ThinQ key */
+ gpio-keys {
+ pinctrl-0 = <&vol_up_pin_a &thinq_key_default>;
+
+ key-thinq {
+ label = "ThinQ";
+ linux,code = <KEY_ASSISTANT>;
+ interrupt-parent = <&tlmm>;
+ interrupts = <89 IRQ_TYPE_LEVEL_LOW>;
+ };
+ };
+};
+
+&adsp_pas {
+ firmware-name = "qcom/sdm845/judyln/adsp.mbn";
+};
+
+&cdsp_pas {
+ firmware-name = "qcom/sdm845/judyln/cdsp.mbn";
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/sdm845/judyln/a630_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/sdm845/judyln/mba.mbn", "qcom/sdm845/judyln/modem.mbn";
+};
+
+&tlmm {
+ thinq_key_default: thinq-key-default {
+ pins = "gpio89";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
new file mode 100644
index 000000000000..d17d4d4d5609
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sdm845-lg-judyp.dts
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * SDM845 LG V35 (judyp) device tree.
+ *
+ * Copyright (c) 2022, The Linux Foundation. All rights reserved.
+ */
+
+/dts-v1/;
+
+#include "sdm845-lg-common.dtsi"
+
+/ {
+ model = "LG V35 ThinQ";
+ compatible = "lg,judyp", "qcom,sdm845";
+
+ chosen {
+ framebuffer@9d400000 {
+ compatible = "simple-framebuffer";
+ reg = <0x0 0x9d400000 0x0 (1440 * 2880 * 4)>;
+ width = <1440>;
+ height = <2880>;
+ stride = <(1440 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+};
+
+&adsp_pas {
+ firmware-name = "qcom/sdm845/judyp/adsp.mbn";
+};
+
+&cdsp_pas {
+ firmware-name = "qcom/sdm845/judyp/cdsp.mbn";
+};
+
+&gpu {
+ zap-shader {
+ firmware-name = "qcom/sdm845/judyp/a630_zap.mbn";
+ };
+};
+
+&mss_pil {
+ firmware-name = "qcom/sdm845/judyp/mba.mbn", "qcom/sdm845/judyp/modem.mbn";
+};
--
2.36.1
