On Fri, Jun 3, 2022 at 11:06 AM Piyush Malgujar <pmalgujar@xxxxxxxxxxx> wrote: > The purpose of this pin-cfg entry is different than the standard GPIO pin config usage. > It is to write a value to GPIO_BIT_CFG register which is used to configure fields like > pin function, selecting which signal is reported to GPIO output or which signal GPIO > input need to connect, filters, XOR and output mode. Then implement pin control for this driver instead of inventing a custom hack? https://docs.kernel.org/driver-api/pin-control.html Several drivers implement pin control with a GPIO front-end, for example: drivers/gpio/gpio-pl061.c is used as a front end with drivers/pinctrl/pinctrl-single.c There are also composite drivers in drivers/pinctrl that implement both pincontrol (incl muxing) and GPIO, such as drivers/pinctrl/pinctrl-sx150x.c Yours, Linus Walleij
