Re: [RESEND 10/14] iio: adc: mt6370: Add Mediatek MT6370 support

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Jonathan,

Sorry for sending the same email again. I miss to reply all in the last email..

Thanks for your valuable suggestions!

Jonathan Cameron <Jonathan.Cameron@xxxxxxxxxx> 於 2022年5月31日 週二 下午9:21寫道:

>
> On Tue, 31 May 2022 19:18:56 +0800
> ChiaEn Wu <peterwu.pub@xxxxxxxxx> wrote:
>
> > From: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
> >
> > Add Mediatek MT6370 ADC support.
> >
> > Signed-off-by: ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>
>
> Hi ChiaEn,
>
> A few comments inline.
>
> Thanks,
>
> Jonathan
>
> > ---
> >  drivers/iio/adc/Kconfig      |   9 ++
> >  drivers/iio/adc/Makefile     |   1 +
> >  drivers/iio/adc/mt6370-adc.c | 257 +++++++++++++++++++++++++++++++++++
> >  3 files changed, 267 insertions(+)
> >  create mode 100644 drivers/iio/adc/mt6370-adc.c
> >
> > diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig
> > index 71ab0a06aa82..d7932dd9b773 100644
> > --- a/drivers/iio/adc/Kconfig
> > +++ b/drivers/iio/adc/Kconfig
> > @@ -737,6 +737,15 @@ config MEDIATEK_MT6360_ADC
> >         is used in smartphones and tablets and supports a 11 channel
> >         general purpose ADC.
> >
> > +config MEDIATEK_MT6370_ADC
> > +     tristate "Mediatek MT6370 ADC driver"
> > +     depends on MFD_MT6370
> > +     help
> > +       Say Y here to enable MT6370 ADC support.
> > +       Integrated for System Monitoring includes
>
> The wrapping of this text needs cleaning up.
>
> > +       is used in smartphones and tablets and supports a 9 channel
> > +       general purpose ADC.
> > +
> >  config MEDIATEK_MT6577_AUXADC
> >       tristate "MediaTek AUXADC driver"
> >       depends on ARCH_MEDIATEK || COMPILE_TEST
> > diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile
> > index 39d806f6d457..0ce285c7e2d0 100644
> > --- a/drivers/iio/adc/Makefile
> > +++ b/drivers/iio/adc/Makefile
> > @@ -68,6 +68,7 @@ obj-$(CONFIG_MCP320X) += mcp320x.o
> >  obj-$(CONFIG_MCP3422) += mcp3422.o
> >  obj-$(CONFIG_MCP3911) += mcp3911.o
> >  obj-$(CONFIG_MEDIATEK_MT6360_ADC) += mt6360-adc.o
> > +obj-$(CONFIG_MEDIATEK_MT6370_ADC) += mt6370-adc.o
> >  obj-$(CONFIG_MEDIATEK_MT6577_AUXADC) += mt6577_auxadc.o
> >  obj-$(CONFIG_MEN_Z188_ADC) += men_z188_adc.o
> >  obj-$(CONFIG_MESON_SARADC) += meson_saradc.o
> > diff --git a/drivers/iio/adc/mt6370-adc.c b/drivers/iio/adc/mt6370-adc.c
> > new file mode 100644
> > index 000000000000..3320ebca17ad
> > --- /dev/null
> > +++ b/drivers/iio/adc/mt6370-adc.c
> > @@ -0,0 +1,257 @@
> > +// SPDX-License-Identifier: GPL-2.0
> > +
> > +#include <dt-bindings/iio/adc/mediatek,mt6370_adc.h>
> > +#include <linux/bits.h>
> > +#include <linux/bitfield.h>
> > +#include <linux/iio/iio.h>
> > +#include <linux/irq.h>
>
> Not seeing any interrupt support in here.

Sorry for that I forgot remove this line, I'll refine it in the next patch.

>
>
> > +#include <linux/kernel.h>
> > +#include <linux/module.h>
> > +#include <linux/mutex.h>
> > +#include <linux/platform_device.h>
> > +#include <linux/regmap.h>
> > +
> > +#define MT6370_REG_CHG_CTRL3         0x113 /* AICR */
> > +#define MT6370_REG_CHG_CTRL7         0x117 /* ICHG */
> > +#define MT6370_REG_CHG_ADC           0x121
> > +#define MT6370_REG_ADC_DATA_H                0x14C
> > +
> > +#define MT6370_ADC_START_MASK                BIT(0)
> > +#define MT6370_ADC_IN_SEL_MASK               GENMASK(7, 4)
> > +#define MT6370_AICR_ICHG_MASK                GENMASK(7, 2)
> > +
> > +#define MT6370_ADC_CHAN_SHIFT                4
>
> Prefer using a mask and then FIELD_PREP

OK, I got it!

>
> > +
> > +#define MT6370_AICR_400MA            0x6
> > +#define MT6370_ICHG_500MA            0x4
> > +#define MT6370_ICHG_900MA            0x8
> > +
> > +#define ADC_CONV_TIME_US             35000
> > +#define ADC_CONV_POLLING_TIME                1000
> > +
> > +struct mt6370_adc_data {
> > +     struct device *dev;
> > +     struct regmap *regmap;
> > +     struct mutex lock;
>
> All locks need documentation.  What is the scope of the lock?
> Looks like it protects device state when doing setup, wait for read, read
> cycles.

This mutex lock is for preventing the different adc channel from being
read at the same time.
So, if I just change its name to adc_chan_lock or adc_lock and add the
comment for this mutex lock, does this change meet your requirement?

>
> > +};
> > +
> > +static int mt6370_adc_read_channel(struct mt6370_adc_data *priv, int chan,
> > +                                unsigned long addr, int *val)
> > +{
> > +     __be16 be_val;
> > +     unsigned int reg_val;
> > +     int ret;
> > +
> > +     mutex_lock(&priv->lock);
> > +
> > +     reg_val = MT6370_ADC_START_MASK | (addr << MT6370_ADC_CHAN_SHIFT);
>
> FIELD_PREP for that shift?

I got it! I'll refine it in the next patch.


>
> > +     ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, reg_val);
> > +     if (ret)
> > +             goto adc_unlock;
> > +
> > +     msleep(ADC_CONV_TIME_US / 1000);
> > +
> > +     ret = regmap_read_poll_timeout(priv->regmap,
> > +                                    MT6370_REG_CHG_ADC, reg_val,
> > +                                    !(reg_val & MT6370_ADC_START_MASK),
> > +                                    ADC_CONV_POLLING_TIME,
> > +                                    ADC_CONV_TIME_US * 3);
> > +     if (ret) {
> > +             if (ret == -ETIMEDOUT)
> > +                     dev_err(priv->dev, "Failed to wait adc conversion\n");
> > +             goto adc_unlock;
> > +     }
> > +
> > +     ret = regmap_raw_read(priv->regmap, MT6370_REG_ADC_DATA_H,
> > +                           &be_val, sizeof(be_val));
> > +     if (ret)
> > +             goto adc_unlock;
> > +
> > +     *val = be16_to_cpu(be_val);
> > +     ret = IIO_VAL_INT;
> > +
> > +adc_unlock:
> > +     mutex_unlock(&priv->lock);
> > +
> > +     return ret;
> > +}
> > +
> > +static int mt6370_adc_read_scale(struct mt6370_adc_data *priv,
> > +                              int chan, int *val1, int *val2)
> > +{
> > +     unsigned int reg_val;
> > +     int ret;
> > +
> > +     switch (chan) {
> > +     case MT6370_CHAN_VBAT:
> > +     case MT6370_CHAN_VSYS:
> > +     case MT6370_CHAN_CHG_VDDP:
> > +             *val1 = 5000;
>
> This seems very large.  Voltages are in millivolts
> as per Documentation/ABI/testing/sysfs-bus-iio
> and this means each step is 5 volts.
>
> So value in mv is currently 5 * _raw
>

OK, I got it. Also, I will add the ABI file in the next version. Thanks!


>
>
> > +             return IIO_VAL_INT;
> > +     case MT6370_CHAN_IBUS:
> > +             ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL3, &reg_val);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val);
> > +             if (reg_val < MT6370_AICR_400MA)
> > +                     *val1 = 33500;
> > +             else
> > +                     *val1 = 50000;
> > +
> > +             return IIO_VAL_INT;
> > +     case MT6370_CHAN_IBAT:
> > +             ret = regmap_read(priv->regmap, MT6370_REG_CHG_CTRL7, &reg_val);
> > +             if (ret)
> > +                     return ret;
> > +
> > +             reg_val = FIELD_GET(MT6370_AICR_ICHG_MASK, reg_val);
> > +             if (reg_val < MT6370_ICHG_500MA)
> > +                     *val1 = 23750;
> > +             else if (reg_val >= MT6370_ICHG_500MA &&
> > +                      reg_val < MT6370_ICHG_900MA)
> > +                     *val1 = 26800;
> > +             else
> > +                     *val1 = 50000;
> > +
> > +             return IIO_VAL_INT;
> > +     case MT6370_CHAN_VBUSDIV5:
> > +             *val1 = 25000;
> > +             return IIO_VAL_INT;
> > +     case MT6370_CHAN_VBUSDIV2:
> > +             *val1 = 50000;
> > +             return IIO_VAL_INT;
> > +     case MT6370_CHAN_TS_BAT:
> > +             *val1 = 25;
> > +             *val2 = 10000;
> > +             return IIO_VAL_FRACTIONAL;
> > +     case MT6370_CHAN_TEMP_JC:
> > +             *val1 = 2;
> > +             return IIO_VAL_INT;
> > +     }
> > +
> > +     return -EINVAL;
> > +}
> > +
> > +static int mt6370_adc_read_offset(struct mt6370_adc_data *priv,
> > +                               int chan, int *val)
> > +{
> > +     *val = (chan == MT6370_CHAN_TEMP_JC) ? -20 : 0;
>
> Offset default is 0, so for channels where it doesn't apply don't
> provide the offset attribute at all.
>

OK!


> > +     return IIO_VAL_INT;
> > +}
> > +
> > +static int mt6370_adc_read_raw(struct iio_dev *iio_dev,
> > +                            const struct iio_chan_spec *chan,
> > +                            int *val, int *val2, long mask)
> > +{
> > +     struct mt6370_adc_data *priv = iio_priv(iio_dev);
> > +
> > +     switch (mask) {
> > +     case IIO_CHAN_INFO_RAW:
> > +             return mt6370_adc_read_channel(priv, chan->channel,
> > +                                            chan->address, val);
> > +     case IIO_CHAN_INFO_SCALE:
> > +             return mt6370_adc_read_scale(priv, chan->channel, val, val2);
> > +     case IIO_CHAN_INFO_OFFSET:
> > +             return mt6370_adc_read_offset(priv, chan->channel, val);
> > +     }
> > +
> > +     return -EINVAL;
> > +}
> > +
> > +static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = {
>
> Perhaps define an enum with which to index this and the chan spec
> and hence ensure they end up matching.
>  [vbusdiv5] = "vbusdiv5", etc
>

Do you mean that I can refine this const char array to the following array??

static const char * const mt6370_channel_labels[MT6370_CHAN_MAX] = {
    [MT6370_CHAN_VBUSDIV5] =  "vbusdiv5",
    [MT6370_CHAN_VBUSDIV2] =  "vbusdiv2",
    ...
    ...
    [MT6370_CHAN_TEMP_JC] =  "temp_jc",
};



> > +     "vbusdiv5", "vbusdiv2", "vsys", "vbat",
> > +     "ts_bat", "ibus", "ibat", "chg_vddp",
> > +     "temp_jc",
> > +};
> > +
> > +static int mt6370_adc_read_label(struct iio_dev *iio_dev,
> > +                              struct iio_chan_spec const *chan, char *label)
> > +{
> > +     return snprintf(label, PAGE_SIZE, "%s\n",
> > +                     mt6370_channel_labels[chan->channel]);
> > +}
> > +
> > +static const struct iio_info mt6370_adc_iio_info = {
> > +     .read_raw = mt6370_adc_read_raw,
> > +     .read_label = mt6370_adc_read_label,
> > +};
> > +
> > +#define MT6370_ADC_CHAN(_idx, _type, _addr) {                        \
> > +     .type = _type,                                          \
> > +     .channel = MT6370_CHAN_##_idx,                          \
> > +     .address = _addr,                                       \
> > +     .scan_index = MT6370_CHAN_##_idx,                       \
> > +     .indexed = 1,                                           \
> > +     .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) |          \
> > +                           BIT(IIO_CHAN_INFO_SCALE) |        \
> > +                           BIT(IIO_CHAN_INFO_OFFSET),        \
>
> See above. Only temp_jc channel should hav an offset.
>
OK!


> > +}
> > +
> > +static const struct iio_chan_spec mt6370_adc_channels[] = {
> > +     MT6370_ADC_CHAN(VBUSDIV5, IIO_VOLTAGE, 1),
> > +     MT6370_ADC_CHAN(VBUSDIV2, IIO_VOLTAGE, 2),
> > +     MT6370_ADC_CHAN(VSYS, IIO_VOLTAGE, 3),
> > +     MT6370_ADC_CHAN(VBAT, IIO_VOLTAGE, 4),
> > +     MT6370_ADC_CHAN(TS_BAT, IIO_VOLTAGE, 6),
> > +     MT6370_ADC_CHAN(IBUS, IIO_CURRENT, 8),
> > +     MT6370_ADC_CHAN(IBAT, IIO_CURRENT, 9),
> > +     MT6370_ADC_CHAN(CHG_VDDP, IIO_VOLTAGE, 11),
> > +     MT6370_ADC_CHAN(TEMP_JC, IIO_TEMP, 12),
> > +};
> > +
> > +static int mt6370_adc_probe(struct platform_device *pdev)
> > +{
> > +     int ret;
> > +     struct mt6370_adc_data *priv;
> > +     struct regmap *regmap;
> > +     struct iio_dev *indio_dev;
> > +
> > +     regmap = dev_get_regmap(pdev->dev.parent, NULL);
> > +     if (!regmap) {
> > +             dev_err(&pdev->dev, "Failed to get regmap\n");
> > +             return -ENODEV;
> > +     }
> > +
> > +     indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*priv));
> > +     if (!indio_dev)
> > +             return -ENOMEM;
> > +
> > +     priv = iio_priv(indio_dev);
> > +     priv->dev = &pdev->dev;
> > +     priv->regmap = regmap;
> > +     mutex_init(&priv->lock);
> > +
> > +     ret = regmap_write(priv->regmap, MT6370_REG_CHG_ADC, 0);
> > +     if (ret) {
> > +             dev_err(&pdev->dev, "Failed to reset adc\n");
> > +             return ret;
> > +     }
> > +
> > +     indio_dev->name = dev_name(&pdev->dev);
>
> What does this end up as?  It's used for userspace ABI and should
> correspond to the part number, "mt6370-adc" probably
> appropriate in this case (I think it'll end up as simply "adc.x"
> currently?)  Normally we just hard code this in the driver for
> whatever devices the driver supports.

I got it, I will change this name to "mt6370-adc" in the next version! Thanks!


>
> > +     indio_dev->info = &mt6370_adc_iio_info;
> > +     indio_dev->modes = INDIO_DIRECT_MODE;
> > +     indio_dev->channels = mt6370_adc_channels;
> > +     indio_dev->num_channels = ARRAY_SIZE(mt6370_adc_channels);
> > +
> > +     return devm_iio_device_register(&pdev->dev, indio_dev);
> > +}
> > +
> > +static const struct of_device_id mt6370_adc_of_id[] = {
> > +     { .compatible = "mediatek,mt6370-adc", },
> > +     {}
> > +};
> > +MODULE_DEVICE_TABLE(of, mt6370_adc_of_id);
> > +
> > +static struct platform_driver mt6370_adc_driver = {
> > +     .driver = {
> > +             .name = "mt6370-adc",
> > +             .of_match_table = mt6370_adc_of_id,
> > +     },
> > +     .probe = mt6370_adc_probe,
> > +};
> > +module_platform_driver(mt6370_adc_driver);
> > +
> > +MODULE_AUTHOR("ChiaEn Wu <chiaen_wu@xxxxxxxxxxx>");
> > +MODULE_DESCRIPTION("MT6370 ADC Drvier");
> > +MODULE_LICENSE("GPL v2");
>

Best regards,
ChiaEn Wu




[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux