> >> samsung,pmu-syscon:
> >> - $ref: '/schemas/types.yaml#/definitions/phandle'
> >> - description: phandle for PMU system controller interface, used to
> >> - control pmu registers bits for ufs m-phy
> >> + $ref: '/schemas/types.yaml#/definitions/phandle-array'
> >> + items:
> >> + minItems: 1
> >> + items:
> >> + - description: phandle for PMU system controller interface, used
> to
> >> + control pmu registers bits for ufs m-phy
> >> + - description: offset of the pmu control register
> >
> > This does not work... Please test your bindings with different cases.
>
> Just to be clear - when I mentioned that minItems should be on second
> items level, I meant it should affect the second items list, not the first.
> Now you can have 1, 2 or 10 phandles.
I put the minItems to the second level as you mentioned but I got below error from dt_binding_check.
--- a/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
@@ -42,8 +42,8 @@ properties:
samsung,pmu-syscon:
$ref: '/schemas/types.yaml#/definitions/phandle-array'
items:
- minItems: 1
items:
+ - minItems: 1
- description: phandle for PMU system controller interface, used to
control pmu registers bits for ufs m-phy
- description: offset of the pmu control register
$ make dt_binding_check DT_SCHEMA_FILES=Documentation/devicetree/bindings/phy/samsung,ufs-phy.yaml
ufs-phy@15571800: samsung,pmu-syscon:0: [4294967295, 1828] is too short
Best Regards,
Chanho Park
