Fix a few issue in bcm47622.dtsi file:
- Remove unnecessary cpu_on and cpu_off properties from psci node
- Add the missing gic registers and interrupts property to gic node
- Cosmetic changes
Signed-off-by: William Zhang <william.zhang@xxxxxxxxxxxx>
---
arch/arm/boot/dts/bcm47622.dtsi | 14 +++++++++-----
1 file changed, 9 insertions(+), 5 deletions(-)
diff --git a/arch/arm/boot/dts/bcm47622.dtsi b/arch/arm/boot/dts/bcm47622.dtsi
index c016e12b7372..2df04528af82 100644
--- a/arch/arm/boot/dts/bcm47622.dtsi
+++ b/arch/arm/boot/dts/bcm47622.dtsi
@@ -32,6 +32,7 @@ CA7_1: cpu@1 {
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
CA7_2: cpu@2 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -39,6 +40,7 @@ CA7_2: cpu@2 {
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
CA7_3: cpu@3 {
device_type = "cpu";
compatible = "arm,cortex-a7";
@@ -46,6 +48,7 @@ CA7_3: cpu@3 {
next-level-cache = <&L2_0>;
enable-method = "psci";
};
+
L2_0: l2-cache0 {
compatible = "cache";
};
@@ -76,6 +79,7 @@ periph_clk: periph-clk {
#clock-cells = <0>;
clock-frequency = <200000000>;
};
+
uart_clk: uart-clk {
compatible = "fixed-factor-clock";
#clock-cells = <0>;
@@ -88,23 +92,23 @@ uart_clk: uart-clk {
psci {
compatible = "arm,psci-0.2";
method = "smc";
- cpu_off = <1>;
- cpu_on = <2>;
};
axi@81000000 {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <1>;
- ranges = <0 0x81000000 0x818000>;
+ ranges = <0 0x81000000 0x8000>;
gic: interrupt-controller@1000 {
compatible = "arm,cortex-a7-gic";
#interrupt-cells = <3>;
- #address-cells = <0>;
interrupt-controller;
+ interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
reg = <0x1000 0x1000>,
- <0x2000 0x2000>;
+ <0x2000 0x2000>,
+ <0x4000 0x2000>,
+ <0x6000 0x2000>;
};
};
--
2.36.1
Attachment:
smime.p7s
Description: S/MIME Cryptographic Signature
