On 30/05/2022 17:02, Hakan Jansson wrote: > Add property, "brcm,requires-autobaud-mode", to enable autobaud mode > selection. > > Some devices (e.g. CYW5557x) require autobaud mode to enable FW loading. > Autobaud mode can also be required on some boards where the controller > device is using a non-standard baud rate when first powered on. > > Signed-off-by: Hakan Jansson <hakan.jansson@xxxxxxxxxxxx> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxx> Best regards, Krzysztof
