Add support to configure MDIO clock frequency via DTS Signed-off-by: Damian Eppel <deppel@xxxxxxxxxxx> Signed-off-by: Piyush Malgujar <pmalgujar@xxxxxxxxxxx> --- Documentation/devicetree/bindings/net/cavium-mdio.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/net/cavium-mdio.txt b/Documentation/devicetree/bindings/net/cavium-mdio.txt index 020df08b8a30f4df80766bb90e100ae6210a777b..638c341966a80823b9eb2f33b947f38110907cc1 100644 --- a/Documentation/devicetree/bindings/net/cavium-mdio.txt +++ b/Documentation/devicetree/bindings/net/cavium-mdio.txt @@ -41,6 +41,9 @@ Properties: - reg: The PCI device and function numbers of the nexus device. +- clock-frequency: MDIO bus clock frequency in Hz. It defaults to 3.125 MHz and + and not to standard 2.5 MHz for Marvell Octeon family. + - #address-cells: Must be <2>. - #size-cells: Must be <2>. @@ -64,6 +67,7 @@ Example: #address-cells = <1>; #size-cells = <0>; reg = <0x87e0 0x05003800 0x0 0x30>; + clock-frequency = <3125000>; ethernet-phy@0 { ... @@ -75,6 +79,7 @@ Example: #address-cells = <1>; #size-cells = <0>; reg = <0x87e0 0x05003880 0x0 0x30>; + clock-frequency = <3125000>; ethernet-phy@0 { ... -- 2.17.1