Hi,
On Tue, May 24, 2022 at 6:22 PM Lad Prabhakar
<prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx> wrote:
>
> The Renesas RZ/Five SoC has a RISC-V AX45MP AndesCore with NCEPLIC100. The
> NCEPLIC100 supports both edge-triggered and level-triggered interrupts. In
> case of edge-triggered interrupts NCEPLIC100 ignores the next interrupt
> edge until the previous completion message has been received and
> NCEPLIC100 doesn't support pending interrupt counter, hence losing the
> interrupts if not acknowledged in time.
>
> So the workaround for edge-triggered interrupts to be handled correctly
> and without losing is that it needs to be acknowledged first and then
> handler must be run so that we don't miss on the next edge-triggered
> interrupt.
>
> This patch adds a new compatible string for Renesas RZ/Five SoC and adds
> support to change interrupt flow based on the interrupt type. It also
> implements irq_ack and irq_set_type callbacks.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> drivers/irqchip/Kconfig | 1 +
> drivers/irqchip/irq-sifive-plic.c | 71 ++++++++++++++++++++++++++++++-
> 2 files changed, 70 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig
> index f3d071422f3b..aea0e4e7e547 100644
> --- a/drivers/irqchip/Kconfig
> +++ b/drivers/irqchip/Kconfig
> @@ -537,6 +537,7 @@ config SIFIVE_PLIC
> bool "SiFive Platform-Level Interrupt Controller"
> depends on RISCV
> select IRQ_DOMAIN_HIERARCHY
> + select IRQ_FASTEOI_HIERARCHY_HANDLERS
> help
> This enables support for the PLIC chip found in SiFive (and
> potentially other) RISC-V systems. The PLIC controls devices
> diff --git a/drivers/irqchip/irq-sifive-plic.c b/drivers/irqchip/irq-sifive-plic.c
> index bb87e4c3b88e..abffce48e69c 100644
> --- a/drivers/irqchip/irq-sifive-plic.c
> +++ b/drivers/irqchip/irq-sifive-plic.c
> @@ -60,10 +60,13 @@
> #define PLIC_DISABLE_THRESHOLD 0x7
> #define PLIC_ENABLE_THRESHOLD 0
>
> +#define RENESAS_R9A07G043_PLIC 1
> +
> struct plic_priv {
> struct cpumask lmask;
> struct irq_domain *irqdomain;
> void __iomem *regs;
> + u8 of_data;
> };
>
> struct plic_handler {
> @@ -163,10 +166,31 @@ static int plic_set_affinity(struct irq_data *d,
> }
> #endif
>
> +static void plic_irq_ack(struct irq_data *d)
> +{
> + struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
> +
> + if (irqd_irq_masked(d)) {
> + plic_irq_unmask(d);
> + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
> + plic_irq_mask(d);
> + } else {
> + writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
> + }
> +}
> +
I sometimes still see an interrupt miss!
As per [0], we first need to claim the interrupt by reading the claim
register which needs to be done in the ack callback (which should be
doable) for edge interrupts, but the problem arises in the chained
handler callback where it does claim the interrupt by reading the
claim register.
static void plic_handle_irq(struct irq_desc *desc)
{
struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
struct irq_chip *chip = irq_desc_get_chip(desc);
void __iomem *claim = handler->hart_base + CONTEXT_CLAIM;
irq_hw_number_t hwirq;
WARN_ON_ONCE(!handler->present);
chained_irq_enter(chip, desc);
while ((hwirq = readl(claim))) {
int err = generic_handle_domain_irq(handler->priv->irqdomain,
hwirq);
if (unlikely(err))
pr_warn_ratelimited("can't find mapping for hwirq %lu\n",
hwirq);
}
chained_irq_exit(chip, desc);
}
I was thinking I would get around by getting the irqdata in
plic_handle_irq() callback using the irq_desc (struct irq_data *d =
&desc->irq_data;) and check the d->hwirq but this will be always 9.
plic: interrupt-controller@12c00000 {
compatible = "renesas-r9a07g043-plic";
#interrupt-cells = <2>;
#address-cells = <0>;
riscv,ndev = <543>;
interrupt-controller;
reg = <0x0 0x12c00000 0 0x400000>;
clocks = <&cpg CPG_MOD R9A07G043_NCEPLIC_ACLK>;
clock-names = "plic100ss";
power-domains = <&cpg>;
resets = <&cpg R9A07G043_NCEPLIC_ARESETN>;
interrupts-extended = <&cpu0_intc 11 &cpu0_intc 9>;
};
Any pointers on how this could be done sanely.
[0] https://github.com/riscv/riscv-plic-spec/blob/master/images/PLICInterruptFlow.jpg
Cheers,
Prabhakar
> static void plic_irq_eoi(struct irq_data *d)
> {
> struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
>
> + /*
> + * For Renesas R9A07G043 SoC if the interrupt type is EDGE
> + * we have already acknowledged it in ack callback.
> + */
> + if (handler->priv->of_data == RENESAS_R9A07G043_PLIC &&
> + !irqd_is_level_type(d))
> + return;
> +
> if (irqd_irq_masked(d)) {
> plic_irq_unmask(d);
> writel(d->hwirq, handler->hart_base + CONTEXT_CLAIM);
> @@ -176,11 +200,37 @@ static void plic_irq_eoi(struct irq_data *d)
> }
> }
>
> +static int plic_irq_set_type(struct irq_data *d, unsigned int type)
> +{
> + struct plic_handler *handler = this_cpu_ptr(&plic_handlers);
> +
> + if (handler->priv->of_data != RENESAS_R9A07G043_PLIC)
> + return 0;
> +
> + switch (type) {
> + case IRQ_TYPE_LEVEL_HIGH:
> + irq_set_handler_locked(d, handle_fasteoi_irq);
> + break;
> +
> + case IRQ_TYPE_EDGE_RISING:
> + irq_set_handler_locked(d, handle_fasteoi_ack_irq);
> + break;
> +
> + default:
> + return -EINVAL;
> + }
> +
> + return 0;
> +}
> +
> static struct irq_chip plic_chip = {
> .name = "SiFive PLIC",
> .irq_mask = plic_irq_mask,
> .irq_unmask = plic_irq_unmask,
> + .irq_ack = plic_irq_ack,
> .irq_eoi = plic_irq_eoi,
> + .irq_set_type = plic_irq_set_type,
> +
> #ifdef CONFIG_SMP
> .irq_set_affinity = plic_set_affinity,
> #endif
> @@ -198,6 +248,19 @@ static int plic_irqdomain_map(struct irq_domain *d, unsigned int irq,
> return 0;
> }
>
> +static int plic_irq_domain_translate(struct irq_domain *d,
> + struct irq_fwspec *fwspec,
> + unsigned long *hwirq,
> + unsigned int *type)
> +{
> + struct plic_priv *priv = d->host_data;
> +
> + if (priv->of_data == RENESAS_R9A07G043_PLIC)
> + return irq_domain_translate_twocell(d, fwspec, hwirq, type);
> +
> + return irq_domain_translate_onecell(d, fwspec, hwirq, type);
> +}
> +
> static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int nr_irqs, void *arg)
> {
> @@ -206,7 +269,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> unsigned int type;
> struct irq_fwspec *fwspec = arg;
>
> - ret = irq_domain_translate_onecell(domain, fwspec, &hwirq, &type);
> + ret = plic_irq_domain_translate(domain, fwspec, &hwirq, &type);
> if (ret)
> return ret;
>
> @@ -220,7 +283,7 @@ static int plic_irq_domain_alloc(struct irq_domain *domain, unsigned int virq,
> }
>
> static const struct irq_domain_ops plic_irqdomain_ops = {
> - .translate = irq_domain_translate_onecell,
> + .translate = plic_irq_domain_translate,
> .alloc = plic_irq_domain_alloc,
> .free = irq_domain_free_irqs_top,
> };
> @@ -293,6 +356,9 @@ static int __init plic_init(struct device_node *node,
> if (!priv)
> return -ENOMEM;
>
> + if (of_device_is_compatible(node, "renesas-r9a07g043-plic"))
> + priv->of_data = RENESAS_R9A07G043_PLIC;
> +
> priv->regs = of_iomap(node, 0);
> if (WARN_ON(!priv->regs)) {
> error = -EIO;
> @@ -411,5 +477,6 @@ static int __init plic_init(struct device_node *node,
> }
>
> IRQCHIP_DECLARE(sifive_plic, "sifive,plic-1.0.0", plic_init);
> +IRQCHIP_DECLARE(renesas_r9a07g043_plic, "renesas-r9a07g043-plic", plic_init);
> IRQCHIP_DECLARE(riscv_plic0, "riscv,plic0", plic_init); /* for legacy systems */
> IRQCHIP_DECLARE(thead_c900_plic, "thead,c900-plic", plic_init); /* for firmware driver */
> --
> 2.25.1
>
