On Sun, May 22, 2022 at 5:50 PM Tomer Maimon <tmaimon77@xxxxxxxxx> wrote:
>
> This patchset adds initial support for the Nuvoton
> Arbel NPCM8XX Board Management controller (BMC) SoC family.
>
> The Nuvoton Arbel NPCM8XX SoC is a fourth-generation BMC.
> The NPCM8XX computing subsystem comprises a quadcore ARM
> Cortex A35 ARM-V8 architecture.
>
> This patchset adds minimal architecture and drivers such as:
> Clocksource, Clock, Reset, and WD.
>
> Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
>
> This patchset was tested on the Arbel NPCM8XX evaluation board.
Thanks for your submission. Please note a few things about the process here:
- The merge window is currently open, which means a lo
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board.
Tomer Maimon (19):
dt-bindings: timer: npcm: Add npcm845 compatible string
clocksource: timer-npcm7xx: Add NPCM845 timer support
dt-bindings: serial: 8250: Add npcm845 compatible string
tty: serial: 8250: Add NPCM845 UART support
dt-bindings: watchdog: npcm: Add npcm845 compatible string
watchdog: npcm_wdt: Add NPCM845 watchdog support
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
clk: npcm8xx: add clock controller
dt-bindings: reset: add syscon property
reset: npcm: using syscon instead of device data
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: Add NPCM8XX support
dt-bindings: arm: npcm: Add maintainer
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: defconfig: Add Nuvoton NPCM family supportt of maintainers
won't be reviewing your patches at the moment. It may be better to wait
for the -rc1 to be out before sending out v2
- don't send your patches to soc@xxxxxxxxxx unless you want me to pick
them up into the soc tree and they have been reviewed already. The series
is clearly still under review at the moment, and I expect it to go through
a few revisions first.
- gmail marked your emails as possible spam for me. I don't know what
happened here, but you may want to look into this to ensure that
everybody receives it.
Some of the Arbel NPCM8XX peripherals are based on Poleg NPCM7XX.
This patchset was tested on the Arbel NPCM8XX evaluation board.
Tomer Maimon (19):
dt-bindings: timer: npcm: Add npcm845 compatible string
clocksource: timer-npcm7xx: Add NPCM845 timer support
dt-bindings: serial: 8250: Add npcm845 compatible string
tty: serial: 8250: Add NPCM845 UART support
dt-bindings: watchdog: npcm: Add npcm845 compatible string
watchdog: npcm_wdt: Add NPCM845 watchdog support
dt-binding: clk: npcm845: Add binding for Nuvoton NPCM8XX Clock
clk: npcm8xx: add clock controller
dt-bindings: reset: add syscon property
reset: npcm: using syscon instead of device data
dt-bindings: reset: npcm: Add support for NPCM8XX
reset: npcm: Add NPCM8XX support
dt-bindings: arm: npcm: Add maintainer
dt-bindings: arm: npcm: Add nuvoton,npcm845 compatible string
dt-bindings: arm: npcm: Add nuvoton,npcm845 GCR compatible string
arm64: npcm: Add support for Nuvoton NPCM8XX BMC SoC
arm64: dts: nuvoton: Add initial NPCM8XX device tree
arm64: dts: nuvoton: Add initial NPCM845 EVB device tree
arm64: defconfig: Add Nuvoton NPCM family support
- For an initial platform submission, I can merge the
clk/clocksource/serial/reset drivers along with the platform if they
have an Ack from the subsystem maintainers. I would normally
not include the watchdog patch in this as it's not essential, but
I suppose that it's fine if you only do a oneline change and it
has an Ack. If you have other nonessential drivers that need changes,
best submit them separately though.
Arnd
