Re: [PATCH v1 11/19] dt-bindings: reset: npcm: Add support for NPCM8XX

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 22/05/2022 17:50, Tomer Maimon wrote:
> Add binding document and device tree binding
> constants for Nuvoton BMC NPCM8XX reset controller.
> 
> Signed-off-by: Tomer Maimon <tmaimon77@xxxxxxxxx>
> ---
>  .../bindings/reset/nuvoton,npcm-reset.txt     |  17 ++-
>  .../dt-bindings/reset/nuvoton,npcm8xx-reset.h | 124 ++++++++++++++++++
>  2 files changed, 139 insertions(+), 2 deletions(-)
>  create mode 100644 include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
> 
> diff --git a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> index cb1613092ee7..b7eb8615b68b 100644
> --- a/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> +++ b/Documentation/devicetree/bindings/reset/nuvoton,npcm-reset.txt
> @@ -1,14 +1,15 @@
>  Nuvoton NPCM Reset controller
>  
>  Required properties:
> -- compatible : "nuvoton,npcm750-reset" for NPCM7XX BMC
> +- compatible : "nuvoton,npcm750-reset" for Poleg NPCM7XX BMC.
> +               "nuvoton,npcm845-reset" for Arbel NPCM8XX BMC.
>  - reg : specifies physical base address and size of the register.
>  - #reset-cells: must be set to 2
>  - syscon: a phandle to access GCR registers.
>  
>  Optional property:
>  - nuvoton,sw-reset-number - Contains the software reset number to restart the SoC.
> -  NPCM7xx contain four software reset that represent numbers 1 to 4.
> +  NPCM7xx and NPCM8xx contain four software reset that represent numbers 1 to 4.
>  
>    If 'nuvoton,sw-reset-number' is not specified software reset is disabled.
>  
> @@ -32,3 +33,15 @@ example:
>          };
>  
>  The index could be found in <dt-bindings/reset/nuvoton,npcm7xx-reset.h>.
> +
> +Specifying reset lines connected to IP NPCM8XX modules
> +======================================================

No need to document consumers. Just mention the header.

> +example:
> +
> +        spi0: spi@..... {
> +                ...
> +                resets = <&rstc NPCM8XX_RESET_IPSRST2 NPCM8XX_RESET_PSPI1>;
> +                ...
> +        };
> +
> +The index could be found in <dt-bindings/reset/nuvoton,npcm8xx-reset.h>.
> diff --git a/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
> new file mode 100644
> index 000000000000..4b832a0fd1dd
> --- /dev/null
> +++ b/include/dt-bindings/reset/nuvoton,npcm8xx-reset.h
> @@ -0,0 +1,124 @@
> +/* SPDX-License-Identifier: GPL-2.0 */

Dual license.

> +// Copyright (c) 2022 Nuvoton Technology corporation.
> +
> +#ifndef _DT_BINDINGS_NPCM8XX_RESET_H
> +#define _DT_BINDINGS_NPCM8XX_RESET_H
> +
> +#define NPCM8XX_RESET_IPSRST1		0x20
> +#define NPCM8XX_RESET_IPSRST2		0x24
> +#define NPCM8XX_RESET_IPSRST3		0x34
> +#define NPCM8XX_RESET_IPSRST4		0x74

What are these? All IDs should be incremental, decimal and start from 0.

> +
> +/* Reset lines on IP1 reset module (NPCM8XX_RESET_IPSRST1) */
> +#define NPCM8XX_RESET_GDMA0		3

IDs start from 0 and do not have holes.


> +#define NPCM8XX_RESET_UDC1		5
> +#define NPCM8XX_RESET_GMAC3		6
> +#define NPCM8XX_RESET_UART_2_3		7
> +#define NPCM8XX_RESET_UDC2		8
> +#define NPCM8XX_RESET_PECI		9
> +#define NPCM8XX_RESET_AES		10
> +#define NPCM8XX_RESET_UART_0_1		11
> +#define NPCM8XX_RESET_MC		12
> +#define NPCM8XX_RESET_SMB2		13
> +#define NPCM8XX_RESET_SMB3		14
> +#define NPCM8XX_RESET_SMB4		15
> +#define NPCM8XX_RESET_SMB5		16
> +#define NPCM8XX_RESET_PWM_M0		18
> +#define NPCM8XX_RESET_TIMER_0_4		19
> +#define NPCM8XX_RESET_TIMER_5_9		20
> +#define NPCM8XX_RESET_GMAC4		21
> +#define NPCM8XX_RESET_UDC4		22
> +#define NPCM8XX_RESET_UDC5		23
> +#define NPCM8XX_RESET_UDC6		24
> +#define NPCM8XX_RESET_UDC3		25
> +#define NPCM8XX_RESET_ADC		27
> +#define NPCM8XX_RESET_SMB6		28
> +#define NPCM8XX_RESET_SMB7		29
> +#define NPCM8XX_RESET_SMB0		30
> +#define NPCM8XX_RESET_SMB1		31
> +
> +/* Reset lines on IP2 reset module (NPCM8XX_RESET_IPSRST2) */
> +#define NPCM8XX_RESET_MFT0		0
> +#define NPCM8XX_RESET_MFT1		1
> +#define NPCM8XX_RESET_MFT2		2
> +#define NPCM8XX_RESET_MFT3		3
> +#define NPCM8XX_RESET_MFT4		4
> +#define NPCM8XX_RESET_MFT5		5
> +#define NPCM8XX_RESET_MFT6		6
> +#define NPCM8XX_RESET_MFT7		7
> +#define NPCM8XX_RESET_MMC		8
> +#define NPCM8XX_RESET_GFX_SYS		10
> +#define NPCM8XX_RESET_AHB_PCIBRG	11
> +#define NPCM8XX_RESET_VDMA		12
> +#define NPCM8XX_RESET_ECE		13
> +#define NPCM8XX_RESET_VCD		14
> +#define NPCM8XX_RESET_VIRUART1		16
> +#define NPCM8XX_RESET_VIRUART2		17
> +#define NPCM8XX_RESET_SIOX1		18
> +#define NPCM8XX_RESET_SIOX2		19
> +#define NPCM8XX_RESET_BT		20
> +#define NPCM8XX_RESET_3DES		21
> +#define NPCM8XX_RESET_PSPI2		23
> +#define NPCM8XX_RESET_GMAC2		25
> +#define NPCM8XX_RESET_USBH1		26
> +#define NPCM8XX_RESET_GMAC1		28
> +#define NPCM8XX_RESET_CP1		31
> +
> +/* Reset lines on IP3 reset module (NPCM8XX_RESET_IPSRST3) */
> +#define NPCM8XX_RESET_PWM_M1		0
> +#define NPCM8XX_RESET_SMB12		1
> +#define NPCM8XX_RESET_SPIX		2
> +#define NPCM8XX_RESET_SMB13		3
> +#define NPCM8XX_RESET_UDC0		4
> +#define NPCM8XX_RESET_UDC7		5
> +#define NPCM8XX_RESET_UDC8		6
> +#define NPCM8XX_RESET_UDC9		7
> +#define NPCM8XX_RESET_USBHUB		8
> +#define NPCM8XX_RESET_PCI_MAILBOX	9
> +#define NPCM8XX_RESET_GDMA1		10
> +#define NPCM8XX_RESET_GDMA2		11
> +#define NPCM8XX_RESET_SMB14		12
> +#define NPCM8XX_RESET_SHA		13
> +#define NPCM8XX_RESET_SEC_ECC		14
> +#define NPCM8XX_RESET_PCIE_RC		15
> +#define NPCM8XX_RESET_TIMER_10_14	16
> +#define NPCM8XX_RESET_RNG		17
> +#define NPCM8XX_RESET_SMB15		18
> +#define NPCM8XX_RESET_SMB8		19
> +#define NPCM8XX_RESET_SMB9		20
> +#define NPCM8XX_RESET_SMB10		21
> +#define NPCM8XX_RESET_SMB11		22
> +#define NPCM8XX_RESET_ESPI		23
> +#define NPCM8XX_RESET_USB_PHY_1		24
> +#define NPCM8XX_RESET_USB_PHY_2		25
> +


Best regards,
Krzysztof



[Index of Archives]     [Device Tree Compilter]     [Device Tree Spec]     [Linux Driver Backports]     [Video for Linux]     [Linux USB Devel]     [Linux PCI Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [XFree86]     [Yosemite Backpacking]


  Powered by Linux